The program description deals with the following:
The data for the TCP protocol can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
This type of protocol is used for devices which communicate with the MICROS Retail OSCAR POS program via a network connection with TCP/IP (e.g. hotel credit via TCP/IP protocol). Please ensure that the protocol parameters match up to those of the connected device and/or partner system.
The interface and link to a processing unit should be defined and the device-specific operation mode set.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a communication protocol is required for error analysis. The
details are shown in file "errlog" in directory work
of the appropriate system unit.
Entry range permitted: numeric 1 – 9
Entry range permitted: numeric 0 -65535
Entry range permitted: numeric 1 - 255
Default = 1
Entry range permitted: numeric 1 - 255
Default = 2
Entry range permitted: numeric 1 - 255
Default = 3
Entry range permitted: numeric 1 - 32000
Default = 200
Entry range permitted: numeric 1
Default = -1
Entry range permitted: numeric 1 – 9 in seconds
The value of the field "MaxIdleTime" is the amount of time that the connection will be held without any data flow. A new connection will not be rejected during that time if the value in field "Max. Connects" is set to "1"..
Generally a new conncetion will be rejected when a connection is established. If this limit is reached, the new connection will be accepted and the existing connection will be closed.
Field with firmly defined selection options
Select one of the offered communication types by clicking on this field and with a second click confirming the selection.
The system offers the following communication types:
Entry range permitted: numeric, 1 9
Default = -8
Switch active:
Switch deactivated:
Switch active:
Switch deactivated:
Schalter aktiviert: Any
characters can(e.g. 0) be transfered.
Schalter deaktiviert: Not any characters (e.g. 0)can be transfered.
Entry range permitted: alphanumeric max. 80 pos.
Enter the name of the server in this field.