Oracle Fusion Middleware Oracle Portal, Forms, Reports and Discovererインストレーション・ガイド 11g リリース1 (11.1.1) B55909-06 |
|
前 |
次 |
この付録では、コマンドラインからサイレント・モードでOracle Portal, Forms, Reports and Discovererをインストールおよびアンインストールする方法について説明します。この付録には、次の項目が含まれます。
サイレント・インストールおよびアンインストールの詳細は、『Oracle Fusion Middlewareインストレーション・プランニング・ガイド』のOracle Fusion Middlewareのサイレント・インストールおよびアンインストールに関する説明を参照してください。
サイレント・インストールを実行する前に、インストール固有の情報をレスポンス・ファイルに指定する必要があります。レスポンス・ファイルを適切に構成せずにインストールを実行しようとすると、インストーラが失敗します。レスポンス・ファイルは、テキスト・エディタで作成または編集できるテキスト・ファイルです。
レスポンス・ファイルを作成するには、まずインストールGUIを実行してから、「インストール・サマリー」で「保存」をクリックすることをお薦めします。このレスポンス・ファイルの名前と作成場所を入力するように求められます。作成されたら、そのファイルを使用して、まったく同じインストールを他のシステムにレプリケートしたり、必要に応じてインストールを修正できます。
この項の内容は次のとおりです。
表E-1は、インストールCD-ROMのDisk1/stage/Response
ディレクトリ(UNIXオペレーティング・システムの場合)またはDisk1\stage\Response
ディレクトリ(Windowsオペレーティング・システムの場合)に用意されているインストール・レスポンス・ファイルのリストです。
表E-1 Oracle Portal, Forms, Reports and Discovererのインストールおよび構成に使用するレスポンス・ファイル・テンプレート
テンプレート | 説明 |
---|---|
|
これは、すでにソフトウェアがシステムにインストールされており、ドメインの作成や拡張のために製品を構成する必要がある場合に使用するレスポンス・ファイル・テンプレートです。 GUIを使用して同等の操作を行う場合は、 このファイルの内容は、E.2.1.1項「 |
|
これは、システムへのソフトウェアのインストールのみを行う場合に使用するレスポンス・ファイル・テンプレートです。 GUIを使用して同等の操作を行う場合は、インストール・タイプの選択で「ソフトウェアのインストール - 構成なし」オプションを選択します。 このファイルの内容は、E.2.1.2項「 |
|
これは、ソフトウェアをシステムにインストールして構成する場合に使用するレスポンス・ファイル・テンプレートです。 GUIを使用して同等の操作を行う場合は、インストール・タイプの選択で「インストールと構成」オプションを選択します。 このファイルの内容は、E.2.1.3項「 |
configure_only.rsp
ファイルの内容この項では、UNIXオペレーティング・システム上のDisk1/stage/Response/configure_only.rsp
レスポンス・ファイルの内容を示します。
[ENGINE] #DO NOT CHANGE THIS. Response File Version=1.0.0.0.0 [GENERIC] #Set this to true if you want to create a new domain, all other required variables need to be provided. If this is set to true then variables "EXTEND_DOMAIN" and "EXPAND_CLUSTER" must be set to false, since the variables are mutually exclusive. CREATE_DOMAIN=true #Set this to true if you want to extend an already existing domain, all other required variables need to be provided. If this is set to true then variables "CREATE_DOMAIN" and "EXPAND_CLUSTER" must be set to false, since the variables are mutually exclusive. EXTEND_DOMAIN=false #Set this to true if you want to expand a cluster in an already existing domain, all other required variables need to be provided. If this is set to true then variables "CREATE_DOMAIN" and "EXTEND_DOMAIN" must be set to false, since the variables are mutually exclusive. EXPAND_CLUSTER=false #Write the name of the domain you want to create. Domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters. DOMAIN_NAME= #Write the name of the host to which you want to connect. It should have an already existing domain configured. DOMAIN_HOSTNAME= #Give the port number at which the host should be connected. DOMAIN_PORT= #Give an administrator user name for the domain if you are creating a new one otherwise give the administrator user name for the domain configured at the host. ADMIN_USER_NAME=weblogic #Give an administrator password for the domain if you are creating a new one otherwise give the administrator password for the domain configured at the host. ADMIN_PASSWORD= #Write the administrator password again to confirm. ADMIN_CONFIRM_PASSWORD= #Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name. MYORACLESUPPORT_USERNAME= #Provide the My Oracle Support Password MYORACLESUPPORT_PASSWORD= #Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration DECLINE_SECURITY_UPDATES=false #Set this to true if My Oracle Support Password is specified SECURITY_UPDATES_VIA_MYORACLESUPPORT=true #Provide the Proxy Host PROXY_HOST= #Provide the Proxy Port PROXY_PORT= #Provide the Proxy Username PROXY_USER= #Provide the Proxy Password PROXY_PWD= #Give the complete path to a valid Middleware Home with WebLogic Server installed. MW_HOME= #Give the complete path to a valid WebLogic Server Home for the corresponding Middleware Home entered. WL_HOME= #Give the complete path for an Oracle Home to be created. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character. ORACLE_HOME= #Give the complete path for an Oracle Instance directory to be created. This is the location where the software configuration files and runtime processes will reside. INSTANCE_HOME= #Give a name for Oracle Instance corresponding to the Instance Home. The Oracle Instance name may only contain alphanumeric and underscore (_) characters, it must begin with an alphabetic (a-z or A-Z) character, and must be from 4 to 30 characters in length. INSTANCE_NAME=asinst_1 #Set this to true if you want the configuration wizard to assign the ports automatically. AUTOMATIC_PORT_DETECT=true #Give the location for the file containing the list of static ports if you manually want to assign ports. STATICPORT INI FILE LOCATION= #Set this to true if you do not want to use proxy. DO NOT USE PROXY SETTINGS=true #Set this to true if you do want to use proxy. ENABLE PROXY=false #Give the host name for proxy settings. PROXY HOST NAME= #Give the port for proxy settings. PROXY PORT NO= #Give the bypass addresses for proxy settings. PROXY BY PASS ADDRESS= #Give the connection string to establish a connection to a database. DATABASE_CONNECTION_STRING= #Set this to true if you want to register Discoverer Schema, schema name and password details need to be provided. REGISTER_DISCOVERER_SCHEMA=true #Give the Discoverer Schema Name. DISCOVERER_SCHEMA_NAME= #Give the Portal Schema Name. PORTAL_SCHEMA_NAME= #Give the Discoverer Schema Password. DISCOVERER_SCHEMA_PASSWORD= #Give the Portal Schema Password. PORTAL_SCHEMA_PASSWORD= #Set this to true if you want to register Portlet Schema, schema name and password details need to be provided. REGISTER_PORTLET_SCHEMA=true #Give the Portlet Schema Name. PORTLET_SCHEMA_NAME= #Give the Portlet Schema Password. PORTLET_SCHEMA_PASSWORD= #Set this to true if you want to use Application OID. It has to be true you are configuring Oracle Portal. USE_OID=true #Give the Application OID hostname. OID_HOST= #Give the Application OID port. OID_PORT= #Give the Application OID user name. OID_USERNAME=cn=orcladmin #Give the Application OID password. OID_PASSWORD= #Set this to true if you want to use Application OID in SSL mode. OID_USE_SSL=false [SYSTEM] [APPLICATIONS] [RELATIONSHIPS] #Set this to true if you want to configure Oracle Portal. "CONFIGURE_WEBCACHE" and "CONFIGURE_OHS" must also be set to true then as Oracle Portal Configuration is dependent on them. CONFIGURE_PORTAL=true #Set this to true if you want to configure Oracle Forms CONFIGURE_FORMS=true #Set this to true if you want to configure Oracle Reports CONFIGURE_REPORTS=true #Set this to true if you want to configure Oracle Discoverer. "CONFIGURE_OHS" must also be set to true then as Oracle Discoverer Configuration is dependent on it. CONFIGURE_DISCO=true #Set this to true if you want to configure Oracle Forms Builder. "CONFIGURE_FORMS" must also be set to true then as Oracle Forms Builder Configuration is dependent on it. CONFIGURE_FORMS_BUILDER=false #Set this to true if you want to configure Oracle Reports Builder. "CONFIGURE_REPORTS" must also be set to true then as Oracle Reports Builder Configuration is dependent on it. CONFIGURE_REPORTS_BUILDER=false #Set this to true if you want to configure Oracle HTTP Server. CONFIGURE_OHS=true #Set this to true if you want to configure Oracle Webcache. "CONFIGURE_OHS" must also be set to true then as Oracle Webcahce Configuration is dependent on it. CONFIGURE_WEBCACHE=true #Set this to true if you want to configure Oracle Enterprise Manager. ENTERPRISE_MANAGEMENT=true #Set this to true if you want to create a cluster for the selected applications CREATE_CLUSTERED=true
install_only.rsp
ファイルの内容この項では、UNIXオペレーティング・システム上のDisk1/stage/Response/install_only.rsp
レスポンス・ファイルの内容を示します。
[ENGINE] #DO NOT CHANGE THIS. Response File Version=1.0.0.0.0 [GENERIC] #Set this to true if installation and configuration need to be done, all other required variables need to be provided. Variable "INSTALL AND CONFIGURE LATER TYPE" must be set to false if this is set to true as the variables are mutually exclusive INSTALL AND CONFIGURE TYPE=false #Set this to true if only Software only installation need to be done. If this is set to true then variable "INSTALL AND CONFIGURE TYPE" must be set to false, since the variables are mutually exclusive. INSTALL AND CONFIGURE LATER TYPE=true #Give the complete path for an Oracle Home to be created. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character. ORACLE_HOME= #Write the complete path to a valid Middleware Home. MW_HOME= #Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name. MYORACLESUPPORT_USERNAME= #Provide the My Oracle Support Password MYORACLESUPPORT_PASSWORD= #Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration DECLINE_SECURITY_UPDATES=false #Set this to true if My Oracle Support Password is specified SECURITY_UPDATES_VIA_MYORACLESUPPORT=true #Provide the Proxy Host PROXY_HOST= #Provide the Proxy Port PROXY_PORT= #Provide the Proxy Username PROXY_USER= #Provide the Proxy Password PROXY_PWD= [SYSTEM] [APPLICATIONS] [RELATIONSHIPS]
install_and_configure.rsp
ファイルの内容この項では、UNIXオペレーティング・システム上のDisk1/stage/Response/install_and_configure.rsp
レスポンス・ファイルの内容を示します。
[ENGINE] #DO NOT CHANGE THIS. Response File Version=1.0.0.0.0 [GENERIC] #Set this to true if installation and configuration need to be done, all other required variables need to be provided. Variable "INSTALL AND CONFIGURE LATER TYPE" must be set to false if this is set to true as the variables are mutually exclusive INSTALL AND CONFIGURE TYPE=true #Set this to true if only Software only installation need to be done. If this is set to true then variable "INSTALL AND CONFIGURE TYPE" must be set to false, since the variables are mutually exclusive. INSTALL AND CONFIGURE LATER TYPE=false #Set this to true if you want to create a new domain, all other required variables need to be provided. If this is set to true then variables "EXTEND_DOMAIN" and "EXPAND_CLUSTER" must be set to false, since the variables are mutually exclusive. CREATE_DOMAIN=true #Set this to true if you want to extend an already existing domain, all other required variables need to be provided. If this is set to true then variables "CREATE_DOMAIN" and "EXPAND_CLUSTER" must be set to false, since the variables are mutually exclusive. EXTEND_DOMAIN=false #Set this to true if you want to expand a cluster in an already existing domain, all other required variables need to be provided. If this is set to true then variables "CREATE_DOMAIN" and "EXTEND_DOMAIN" must be set to false, since the variables are mutually exclusive. EXPAND_CLUSTER=false #Write the name of the domain you want to create. Domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters. DOMAIN_NAME= #Write the name of the host to which you want to connect. It should have an already existing domain configured. DOMAIN_HOSTNAME= #Give the port number at which the host should be connected. DOMAIN_PORT= #Give an administrator user name for the domain if you are creating a new one otherwise give the administrator user name for the domain configured at the host. ADMIN_USER_NAME=weblogic #Give an administrator password for the domain if you are creating a new one otherwise give the administrator password for the domain configured at the host. ADMIN_PASSWORD= #Write the administrator password again to confirm. ADMIN_CONFIRM_PASSWORD= #Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name. MYORACLESUPPORT_USERNAME= #Provide the My Oracle Support Password MYORACLESUPPORT_PASSWORD= #Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration DECLINE_SECURITY_UPDATES=false #Set this to true if My Oracle Support Password is specified SECURITY_UPDATES_VIA_MYORACLESUPPORT=true #Provide the Proxy Host PROXY_HOST= #Provide the Proxy Port PROXY_PORT= #Provide the Proxy Username PROXY_USER= #Provide the Proxy Password PROXY_PWD= #Give the complete path to a valid Middleware Home with WebLogic Server installed. MW_HOME= #Give the complete path to a valid WebLogic Server Home for the corresponding Middleware Home entered. WL_HOME= #Give the complete path for an Oracle Instance directory to be created. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character. ORACLE_HOME= #Give the complete path for an Oracle Instance directory to be created. This is the location where the software configuration files and runtime processes will reside. INSTANCE_HOME= #Give a name for Oracle Instance corresponding to the Instance Home. The Oracle Instance name may only contain alphanumeric and underscore (_) characters, it must begin with an alphabetic (a-z or A-Z) character, and must be from 4 to 30 characters in length. INSTANCE_NAME=asinst_1 #Set this to true if you want the configuration wizard to assign the ports automatically. AUTOMATIC_PORT_DETECT=true #Give the location for the file containing the list of static ports if you manually want to assign ports. STATICPORT INI FILE LOCATION= #Set this to true if you do not want to use proxy. DO NOT USE PROXY SETTINGS=true #Set this to true if you do want to use proxy. ENABLE PROXY=false #Give the host name for proxy settings. PROXY HOST NAME= #Give the port for proxy settings. PROXY PORT NO= #Give the bypass addresses for proxy settings. PROXY BY PASS ADDRESS= #Give the connection string to establish a connection to a database. DATABASE_CONNECTION_STRING= #Set this to true if you want to register Discoverer Schema, schema name and password details need to be provided. REGISTER_DISCOVERER_SCHEMA=true #Give the Discoverer Schema Name. DISCOVERER_SCHEMA_NAME= #Give the Portal Schema Name. PORTAL_SCHEMA_NAME= #Give the Discoverer Schema Password. DISCOVERER_SCHEMA_PASSWORD= #Give the Portal Schema Password. PORTAL_SCHEMA_PASSWORD= #Set this to true if you want to register Portlet Schema, schema name and password details need to be provided. REGISTER_PORTLET_SCHEMA=true #Give the Portlet Schema Name. PORTLET_SCHEMA_NAME= #Give the Portlet Schema Password. PORTLET_SCHEMA_PASSWORD= #Set this to true if you want to use Application OID. It has to be true you are configuring Oracle Portal. USE_OID=true #Give the Application OID hostname. OID_HOST= #Give the Application OID port. OID_PORT= #Give the Application OID user name. OID_USERNAME=cn=orcladmin #Give the Application OID password. OID_PASSWORD= #Set this to true if you want to use Application OID in SSL mode. OID_USE_SSL=false [SYSTEM] [APPLICATIONS] [RELATIONSHIPS] #Set this to true if you want to configure Oracle Portal. "CONFIGURE_WEBCACHE" and "CONFIGURE_OHS" must also be set to true then as Oracle Portal Configuration is dependent on them. CONFIGURE_PORTAL=true #Set this to true if you want to configure Oracle Forms CONFIGURE_FORMS=true #Set this to true if you want to configure Oracle Reports CONFIGURE_REPORTS=true #Set this to true if you want to configure Oracle Discoverer. "CONFIGURE_OHS" must also be set to true then as Oracle Discoverer Configuration is dependent on it. CONFIGURE_DISCO=true #Set this to true if you want to configure Oracle Forms Builder. "CONFIGURE_FORMS" must also be set to true then as Oracle Forms Builder Configuration is dependent on it. CONFIGURE_FORMS_BUILDER=false #Set this to true if you want to configure Oracle Reports Builder. "CONFIGURE_REPORTS" must also be set to true then as Oracle Reports Builder Configuration is dependent on it. CONFIGURE_REPORTS_BUILDER=false #Set this to true if you want to configure Oracle HTTP Server. CONFIGURE_OHS=true #Set this to true if you want to configure Oracle Webcache. "CONFIGURE_OHS" must also be set to true then as Oracle Webcahce Configuration is dependent on it. CONFIGURE_WEBCACHE=true #Set this to true if you want to configure Oracle Enterprise Manager. ENTERPRISE_MANAGEMENT=true #Set this to true if you want to create a cluster for the selected applications CREATE_CLUSTERED=true
この項では、パッチ・セット・インストーラのアーカイブ・ファイルをダウンロードして解凍した、Disk1/stage/Response
ディレクトリ(UNIXオペレーティング・システムの場合)またはDisk1\stage\Response
ディレクトリ(Windowsオペレーティング・システムの場合)に用意されているclassic_patch_install.rsp
レスポンス・ファイルについて説明します。このレスポンス・ファイルは、既存のOracle Portal, Forms, Reports and DiscovererのOracleホームを更新する場合に使用します。
UNIXシステム上のDisk1/stage/Response/classic_patch_install.rsp
レスポンス・ファイルの内容は次のとおりです。
[ENGINE] #DO NOT CHANGE THIS. Response File Version=1.0.0.0.0 [GENERIC] #Provide the Oracle Home location. The location has to be the immediate child under the specified Middleware Home location. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character. The total length has to be less than or equal to 128 characters. The location has to be an empty directory or a valid WebTier Oracle Home. ORACLE_HOME=/scratch/Middleware/as_1 #Provide existing Middleware Home location. MIDDLEWARE_HOME=/scratch/Middleware #Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name. MYORACLESUPPORT_USERNAME= #Provide the My Oracle Support Password MYORACLESUPPORT_PASSWORD=<SECURE VALUE> #Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My OracleSupport username will ignore the Oracle Configuration Manager configuration DECLINE_SECURITY_UPDATES=true #Set this to true if My Oracle Support Password is specified SECURITY_UPDATES_VIA_MYORACLESUPPORT=false # CONFIG_WIZARD_RESPONSE_FILE_LOCATION=0 [SYSTEM] [APPLICATIONS] [RELATIONSHIPS]
このファイル内で設定が必要なパラメータは、次のとおりです。
ORACLE_HOME
。Oracleホーム・ディレクトリのフルパスを指定します。
MIDDLEWARE_HOME
。Middlewareホーム・ディレクトリのフルパスを指定します。
ソフトウェアおよびセキュリティを自動更新するように、Oracle Configuration Managerを構成するかどうかを決定します。
Oracle Configuration Managerを構成しない場合は、DECLINE_SECURITY_UPDATES
をtrue
に設定します。
Oracle Configuration Managerを構成する場合は、SECURITY_UPDATES_VIA_MYORACLESUPPORT
をtrue
に設定します。この場合は、MYORACLESUPPORT_USERNAME
とMYORACLESUPPORT_PASSWORD
のパラメータに、My Oracle Supportのユーザー名とパスワードをそれぞれ設定する必要があります。
Oracle Configuration Managerの詳細は、『Oracle Fusion Middlewareインストレーション・プランニング・ガイド』のOracle Configuration Managerのインストールに関する項を参照してください。
表E-2は、インストールCD-ROMのDisk1/stage/Response
ディレクトリ(UNIXオペレーティング・システムの場合)またはDisk1\stage\Response
ディレクトリ(Windowsオペレーティング・システムの場合)に用意されているアンインストール・レスポンス・ファイルのリストです。
表E-2 Oracle Portal, Forms, Reports and Discovererのアンインストールに使用するレスポンス・ファイル・テンプレート
テンプレート | 説明 |
---|---|
|
システム上に管理対象インスタンスを構成した場合に使用するテンプレート・レスポンス・ファイルです。これらの管理対象インスタンスは、Oracleホームを削除する前に削除する必要があります。 GUIを使用して同等の操作を行う場合は、アンインストーラを起動し、「アンインストール・タイプの選択」で「Weblogicドメインにより管理されているASInstanceのアンインストール」オプションを選択します。 このファイルの内容は、E.2.3.1項「 |
|
システム上に管理対象外インスタンスを構成した場合に使用するテンプレート・レスポンス・ファイルです。これらの管理対象外インスタンスは、Oracleホームを削除する前に削除する必要があります。 GUIを使用して同等の操作を行う場合は、アンインストーラを起動し、「アンインストール・タイプの選択」で「管理対象外のASInstanceのアンインストール」オプションを選択します。 このファイルの内容は、E.2.3.2項「 |
|
これは、このOracleホームを使用する管理対象および管理対象外のすべてのインスタンスをすでに削除した場合に使用するテンプレート・レスポンス・ファイルであり、これでOracleホームを削除する準備ができました。 GUIを使用して同等の操作を行う場合は、アンインストーラを起動し、「アンインストール・タイプの選択」で「Oracleホームのアンインストール」オプションを選択します。 このファイルの内容は、E.2.3.3項「 |
これらの既存のレスポンス・ファイルに加えて、アンインストーラGUIを実行し、「アンインストール・サマリー」(管理対象インスタンス)画面で「保存」をクリックすることで、独自のレスポンス・ファイルを作成できます。このレスポンス・ファイルの名前と作成場所を入力するように求められます。作成した後は、このファイルを使用して、他のシステムに同一のアンインストールを複製することも、必要に応じて変更することもできます。
deinstall_managed_instances.rsp
ファイルの内容この項では、UNIXシステム上のDisk1/stage/Response/deinstall_managed_instances.rsp
レスポンス・ファイルの内容を示します。
[ENGINE] #DO NOT CHANGE THIS. Response File Version=1.0.0.0.0 [GENERIC] #Identifies if the Instance deinstallation is valid or not DEINSTALL_IN_ASINSTANCE_MODE=true #Specify true for Oracle Home deinstall OH_HOME_DEINSTALL=false #Specify true for Managed Instance deinstall DOMAIN_MANAGED_ASINSTANCE_DEINSTALL=true #Specify true for Un-managed Instance deinstall UNMANAGED_ASINSTANCE_DEINSTALL=false [SYSTEM] [APPLICATIONS] [RELATIONSHIPS] #Specify the Domain Host Name DOMAIN_HOST_NAME=localhost.domain #Specify the Domain Port Number DOMAIN_PORT_NO=7001 #Specify the Domain User Name DOMAIN_USER_NAME=weblogic #Specify the Domain Password DOMAIN_USER_PASSWORD=<SECURE PASSWORD> #Specify the list of Instance to be deinstalled in the following format. InstanceName^LocationOfInstance$InstanceName^LocationOfInstance MANAGED_INSTANCE_LIST=asinst_1^C:\wls1\asinst_1$
deinstall_unmanaged_instances.rsp
ファイルの内容この項では、UNIXシステム上のDisk1/stage/Response/deinstall_unmanaged_instances.rsp
レスポンス・ファイルの内容を示します。
[ENGINE] #DO NOT CHANGE THIS. Response File Version=1.0.0.0.0 [GENERIC] #Identifies if the Instance deinstallation is valid or not DEINSTALL_IN_ASINSTANCE_MODE=true #Specify true for Oracle Home deinstall OH_HOME_DEINSTALL=false #Specify true for Managed Instance deinstall DOMAIN_MANAGED_ASINSTANCE_DEINSTALL=false #Specify true for Un-managed Instance deinstall UNMANAGED_ASINSTANCE_DEINSTALL=true #Specify the path of the Un-managed Instance ASINSTANCE_LOCATION_TEXTFIELD=c:\Oracle\Middleware\asinst_1 [SYSTEM] [APPLICATIONS] [RELATIONSHIPS]
deinstall_oh.rsp
ファイルの内容この項では、UNIXシステム上のDisk1/stage/Response/deinstall_oh.rsp
レスポンス・ファイルの内容を示します。
[ENGINE] #DO NOT CHANGE THIS. Response File Version=1.0.0.0.0 [GENERIC] #Identifies if the Instance deinstallation is valid or not DEINSTALL_IN_ASINSTANCE_MODE=true #Specify true for Oracle Home deinstall OH_HOME_DEINSTALL=true #Specify true for Managed Instance deinstall DOMAIN_MANAGED_ASINSTANCE_DEINSTALL=false #Specify true for Un-managed Instance deinstall UNMANAGED_ASINSTANCE_DEINSTALL=false [SYSTEM] [APPLICATIONS] [RELATIONSHIPS]