samua (Display Archiver Status Screen)
abr (Enable Application Based Recovery)
add (Add Equipment to a Mounted File System)
alloc (Enable Storage Allocation on a Device)
aplease (Set Append Lease Expiration Time for a Shared File System)
aridle (Stop Archiving Gracefully)
arrerun (Restart the Archiver Non-Disruptively)
arrestart (Restart the Archiver Disruptively)
arrmarchreq (Remove Archive Requests)
arrun (Start Archiving)
arscan (Scan a File System for Unarchived Files)
arstop (Stop All Archiving Immediately)
artrace (Perform Archiver Tracing)
atime (Configure Access Time Updates for a File System)
audit (Audit Library or Library Slot)
c (Display Device Configuration Screen)
clear (Clear a Load Request for a Removable Storage Volume)
d (Display Daemon Trace Controls Screen)
def_retention (Set Default WORM Retention Time)
devlog (Set Device Logging Options)
dio_rd_consec (Limit the Number of Consecutive Direct Reads)
dio_rd_form_min (Set the Size of Well-Aligned Direct I/O Reads)
dio_rd_ill_min (Set the Size of Misaligned Direct I/O Reads)
dio_szero (Zero Uninitialized Areas of Sparse Files During Direct I/O)
dio_wr_consec (Limit the Number of Consecutive Direct Writes)
dio_wr_form_min (Set the Size of Well-Formed Direct I/O Writes)
dio_wr_ill_min (Set the Size of Misaligned Direct I/O Writes)
diskvols (Set/Clear Flags on Disk Volumes Used for Archiving)
dmr (Enable Directed Mirror Reads of Software Mirrors)
dtrace (Enable/Configure Tracing for Oracle HSM Daemons)
export (Move Removable Media to the Robotic Library's Mailbox)
f (Display File Systems Screen)
flush_behind (Set the Flush-Behind Parameter)
forcedirectio (Use Direct I/O by Default)
force_nfs_async (Force Asynchronous NFS)
fs (Specify a File System)
g (Display Shared File System Clients)
h (Display the Help Screen)
samu Interface Controlssamu Command Prompthwm_archive (Start Archiving When the High Water Mark is Reached)
idle (Idle Device)
import (Move Removable Media from the Mailbox into the Robotic Library)
invalid (Set the Invalidate-Cache Delay for a Multi-Reader File System)
l (Display Utilization Information)
lease_timeo (Set the Unused Lease Timeout for a Shared File System)
load (Load a Cartridge into a Drive)
m (Display the Mass Storage Status Screen)
maxallocsz (Set the Maximum Allocation Size for a Shared File System)
maxpartial (Set the Maximum Partial Release Size for the File System)
meta_timeo (Set the Metadata Cache Timeout for a Shared File System)
mh_write (Turn on Multi-Host Read/Write)
mh_write (Turn on Multi-Host Read/Write)
migconfig (Configure Migration to New Media)
migidle (Configure Migration to New Media)
migstart (Start the Media Migration Service)
migstop (Stop the Media Migration Service)
minallocsz (Set the Minimum Allocation Size for a Shared File System)
mm_stripe (Set the Metadata Stripe Width)
n (Display the Staging Status Screen)
noabr (Disable Application Based Recovery)
noalloc (Disable Storage Allocation on a Device)
noatime (Disable Access Time Updates for a File System)nodio_szero (Do Not Zero Uninitialized Areas of Sparse Files with Direct I/O)
nodmr (Disable Directed Mirror Reads of Software Mirrors)
noforcedirectio (Do Not Use Direct I/O by Default)
noforce_nfs_async (Do Not Force Asynchronous NFS)
nohwm_archive (Do Not Start Archiving at the High Water Mark)
nomh_write (Turn Off Multi-Host Read/Write)
norefresh_at_eof (Do Not Refresh at EOF in a Multi-Reader File System)
noqwrite (Disable Simultaneous Reads/Writes from Different Threads)
nosuid (Mount a File System with setuid Execution Disabled)
nosw_raid (Turn Off Software RAID Mode)
notrace (Disable File System Tracing)
o (Display the Optical Disk Status Screen)
off (Turn Off A Device)
on (Turn On A Device)
open (Open a Disk Storage Device for Reading)
p (Display the Removable Media Load Requests Screen)
partial (Set the Default Partial Release Size for the File System)
partial_stage (Set Partial Stage-Ahead Point for the File System)
priority (Set Priority in Load-Request Preview Queue)
qwrite (Enable Simultaneous Reads/Writes to a File from Different Threads)
r (Display the Removable Media Status Screen
rdlease (Set the Read Lease Time for a Shared File System)
read (Read Sectors On a Disk Storage Device)
readahead (Set The Maximum Read-Ahead Parameter)
readonly | ro (Make Device Read Only)
refresh (Set the Automatic Refresh Interval for the samu Display)
refresh_at_eof (Refresh at EOF in a Multi-Reader File System)
release (Release Archived Data Files and Disable Allocation on a Device)
remove (Move Data and Remove Equipment from a File System)
s (Display Device Status Screen)
snap (Save a Snapshot of the Current Screen to a File)
stage_flush_behind (Set the Stage Flush Behind Size)
stage_n_window (Size the Buffer for Reading Directly from Archival Media)
stclear (Clear a Stage Request)
stidle (Stop Staging as Soon as Possible)
stripe (Set the Stripe Width for a File System)
strun (Start Staging)
suid (Mount a File System with setuid Execution Enabled)
sw_raid (Turn On Software RAID Mode)
sync_meta (Synchronize File System Metadata)
t (Display Tape Drive Status Screen)
thresh (Set High and Low Watermarks)
trace (Enable File System Tracing)
u (Display Staging Queue Screen)
unavail (Make a Device Unavailable to Oracle HSM)
unload (Unload a Drive)
v (Display Robot VSN Catalog Screen)
w (Display the Pending Stage Queue Screen)
wr_throttle (Set the Maximum Size of Outstanding Writes)
writebehind (Set the Write-Behind Parameter)
wrlease (Set the Write Lease Time for a Shared File System)
x (Display Current Migration Status)
y (List Migrating Volumes by VSN)
:C (Display the Contents of Shared Memory at a Specified Address)
D (Display Disk Volume Dictionary Screen)
F (Display Optical Disk Label Screen)fs (Specify a File System)
I (Display Inode Information)
J (Display the Shared Memory Segment for the Load-Request Preview Queue)
K (Display Kernel Statistics)
L (Display Shared Memory Tables and System Defaults)
M (Display Raw Shared Memory)
mount (Select a Mount Point)
N (Display File System Parameters)
P (Display Active Services)
R (Display SAM-Remote Configuration Information)S (Display Raw Sector Data)
T (Display SCSI Sense Data for a Current or Specified Device)
U (Display Device Table in Human-Readable Form)