System Messages: CMDSCA Catalog 1300-1399


1300	ERROR: Invalid option: opt
	Description	User entered invalid command line option opt for `scaadmin`.
	Action	Use the correct command line option.
	See Also	`scaadmin`
1301	ERROR: Invalid argument: arg
	Description	Invalid `scaadmin` command line argument.
	Action	Remove the invalid command line argument.
	See Also	`scaadmin`
1302	ERROR: TUXCONFIG environment variable not set.
	Description	TUXCONFIG environment variable is not set.
	Action	Set the TUXCONFIG environment variable to a valid TUXCONFIG file and re-run the `scaadmin` utility.

1303	ERROR: TUXCONFIG must be an absolute pathname.
	Description	The TUXCONFIG environment variable must be of full path name.
	Action	Set the TUXCONFIG environment variable to a valid TUXCONFIG file with full path name from system root, and then re-run the `scaadmin` utility.

1304	*Usage: procname* [-v]**
	Description	Usage information of the program procname.
	Action	No action required.

1305	ERROR: Error while obtaining the Bulletin Board parameters
	Description	An error was produced in `scaadmin` while retrieving the Bulletin Board parameters. A more specific error explaining the situation should already exist in the user log.
	Action	Check the user log for a more specific error message. Check that TUXCONFIG is readable, and re-run the `scaadmin`.
	See Also	`scaadmin`
1306	ERROR: Could not determine level of authentication required.
	Description	when `scaadmin` starts up, it calls `tpchkauth`(3c) to see what level of authentication is required by the application. This message is issued when `tpchkauth`(3c) fails. `tpchkauth`(3c) can fail if `scaadmin` cannot find the `TUXCONFIG` file.
	Action	Make sure the `TUXCONFIG` environment variable is set correctly.
	See Also	`scaadmin`
1307	ERROR: Could not allocate internal TPINIT typed buffer.
	Description	Executing the `scaadmin` utility error. An error was encountered while trying to obtain virtual memory for the `TPINIT` buffer.
	Action	Attempt to identify and stop any extraneous processes to free up virtual memory on your system, and then retry the utility.
	See Also	`scaadmin`
1308	*ERROR: Could not find entry for user UID.*
	Description	When `scaadmin` is invoked, the invoker;s login ID is used as the "User Name" when `scaadmin` joins the application. If there is an error retrieving the login ID from the system password file, this message is printed.
	Action	Contact your system administrator to ensure that your password entry contains your user ID (UID) and your login.
	See Also	`scaadmin`
1309	Application Password :
	Description	A prompt for user to enter application password.
	Action	Enter the configured Tuxedo application password.
	See Also	`scaadmin`
1310	ERROR: Unable to obtain application password.n
	Description	If an applicatoion password is required, `scaadmin` either prompts for it when the invoker is attached to a terminal, or it reads from the environment variable, `APP_PW`, if standard input is not terminal. This message is issued when the password cannot be obtained. The most common cause for this is that `APP_PW` is not set and standard input is not a terminal.
	Action	If `scaadmin` is not attached to a terminal when invoked then check that the environment variable, `APP_PW`, is set correctly.
	See Also	`scaadmin`
1311	ERROR: can't become a client - tpinit() failed - n
	Description	Execution of `wsadmin` failed because the user could not join the application. The printed string indicates the reason for the failure. This message can be printed either because no more clients can join the application or because the user failed security permissions.
	Action	If the reason is that no more clients can join the application, re-try the operation a later time. The system should be configured to allow for more clients.
	See Also	`scaadmin`
1312	Bulletin board does not exist.
	Description	The Tuxedo application not yet booted.
	Action	Information only.
	See Also	`scaadmin`
1313	Entering boot mode.
	Description	Entering boot mode.
	Action	Information only.
	See Also	`scaadmin`
1314	WARN: Cannot become administrator. Limited set of commands available.
	Description	The `scaadmin` program was not able to enter the administrative mode. A limited set of commands is available.
	Action	No action is required.
	See Also	`scaadmin`
1316	Attaching to active bulletin board.
	Description	Informational message telling user that `scaadmin` attaching to an active bulletin board.
	Action	No action is required.
	See Also	`scaadmin`
1317	*ERROR: Error executing cmd.*
	Description	A command was given to `scaadmin` that was to be executed by teh shell. An error was encountered by the shell in executing the command.
	Action	Retry the command. If it continues to fail, refer to the `system`(3S) manual page for reasons why the command may have failed.
	See Also	`scaadmin`
1318	*ERROR: -char* option: argument must be numeric.**
	Description	When the -char option is used as an argument to the `scaadmin` sub-command, its argument must be a numeric value.
	Action	Try the command again with the numeric vale for the char option.
	See Also	`scaadm`
1319	opt now on.
	Description	Command option opt is turned on.
	Action	No action is required.
	See Also	`scaadmin`
1320	opt now off.
	Description	Command option opt is turned off.
	Action	No action is required.
	See Also	`scaadmin`
1321	(not set)
	Description	No default value set.
	Action	No action is required.
	See Also	`scaadmin`
1322	Default Settings:
	Description	Default option values setting information header.
	Action	No action is required.
	See Also	`scaadmin`
1323	LMID: lmid
	Description	Default command option for LMID is lmid.
	Action	Informational message, no action is required.
	See Also	`scaadmin`
1324	group name: grp
	Description	Default command option for group is grp.
	Action	No action is required.
	See Also	`scaadmin`
1325	server id: id
	Description	Default command option for server identification is id.
	Action	No action is required.
	See Also	`scaadmin`
1326	server name: svr
	Description	Default command option for server executable name is svr.
	Action	No action is required.
	See Also	`scaadmin`
1327	ERROR: Can't allocate memory. (IC=)
	Description	`scaadmin` detected an error while trying to process the operation specified by the value code. The process was unable to obtain virtual memory. There value code is an internal error code for use in diagnosis.
	Action	Attempt to identify and stop any extraneous processes t free up virtual memory on your system.
	See Also	`scaadmin`
1328	ERROR: Cannot perform the operation. Please check the ULOG for more descriptive message. (IC=)
	Description
	Action

1329	ERROR: Invalid machine_id value
	Description	The machine_id value is invalid.
	Action	Use the valid machine_id value.
	See Also	`scaadmin`
1330	ERROR: machine instance is not present
	Description	The specified machine id is not available.
	Action	Boot the Tuxedo application on all the machine nodes in the configuration.
	See Also	`scaadmin`
1331	*ERROR: call SCA service error(tperrno=errno)*
	Description	Failed to call SCA service with error information described by error number errno(/var>.
	Action	Check to see whether all the configured SCA servers are booted and available. If not, boot them.
	See Also	`scaadmin`
1333	*ERROR: Bad LMID(lmid).*
	Description	The specified argument lmid for command option LMID is invalid or not available.
	Action	Use the correct LMID value for the `scaadmin` command.
	See Also	`scaadmin`
1334	*ERROR: Invalid server group name (grp).*
	Description	The specified argument grp for command option group is invalid.
	Action	Use the correct group name value for the `scaadmin` command.
	See Also	`scaadmin`
1335	ERROR: Illegal value for server id.
	Description	The specified argument value for command option service id is not valid.
	Action	Use the correct server id value for the `scaadmin` command.
	See Also	`scaadmin`
1336	ERROR: Memory allocation failure.
	Description	Failed to allocate memory to process `scaadmin` unload command.
	Action	Install more system memory or configure larger system virtual memory.
	See Also	`scaadmin`
1337	ERROR: Memory allocation failure.
	Description	Failed to allocate memory to process `scaadmin` unload command.
	Action	Install more system memory or configure larger system virtual memory.
	See Also	`scaadmin`
1338	ERROR: Execution of reload failed, processing stopped.
	Description	The reload `scaadmin` command failed.
	Action	Check whether the targeted SCA server is booted, if not boot it. If the server is already booted check whether it is really a SCA server.
	See Also	`scaadmin`
1339	*ERROR: Bad LMID(lmid).*
	Description	The specified argument lmid for command option LMID is invalid or not available.
	Action	Use the correct LMID value for the `scaadmin` command.
	See Also	`scaadmin`
1340	*ERROR: Invalid server group name (grp).*
	Description	The specified argument grp for command option group is invalid.
	Action	Use the correct group name value for the `scaadmin` command.
	See Also	`scaadmin`
1341	ERROR: Illegal value for server id.
	Description	The specified argument value for command option service id is not valid.
	Action	Use the correct server id value for the `scaadmin` command.
	See Also	`scaadmin`
1342	ERROR: Memory allocation failure.
	Description	Failed to allocate memory to process `scaadmin` printstats command.
	Action	Install more system memory or configure larger system virtual memory.
	See Also	`scaadmin`
1343	ERROR: Memory allocation failure.
	Description	Failed to allocate memory to process `scaadmin` printstats command.
	Action	Install more system memory or configure larger system virtual memory.
	See Also	`scaadmin`
1344	ERROR: Exceution of printstats failed, processing stopped.
	Description	The printstats `scaadmin` command failed.
	Action	Check whether the targeted SCA server is booted, if not boot it. If the server is already booted check whether it is really a SCA server.

1345	ERROR: Memory allocation failure.
	Description	Failed to allocate memory to process target SCA server list.
	Action	Install more memory or configure larger virtual memory.

1346	*ERROR: Reading SERVERS section**
	Description	Failed to read TUXCONFIG configuration's "SERVERS" section to process target SCA server list.
	Action	Make sure Tuxedo application is booted. If this problem persists, contact Oracle Technical Support.
	See Also	`scaadmin`
1347	ERROR: Failed to acquire BB lock.
	Description	Failed to acquire Bulletin Board access lock.
	Action	Make sure your Tuxedo application is booted and running. If this problem persists, contact Oracle Technical Support.

1348	ERROR: Unable to find service svc
	Description	Unable to find the SCA administrative service svc.
	Action	Make sure the server is a SCA server and is built using `buildscacomponent` and `buildscaserver`.
	See Also	`scaadmin`, `buildscacompoient`, `buildscaserver`
1349	ERROR: No service entry found.
	Description	No target SCA administrative service found in the Tuxedo application.
	Action	Make sure the Tuxedo configuration is correct. And if the configuration contains SCA servers then make sure there server are really SCA servers and are built using `buildscacomponent` and `buildscaserver`.
	See Also	`scaadmin`, `buildscacompoient`, `buildscaserver`
1350	*ERROR: Invalid server ID (svrid)*
	Description	The specified `scaadmin` server id command option is not found or not valid.
	Action	Use the valid server id when issue `scaadmin` command.
	See Also	`scaadmin`
1351	*ERROR: No service entry found for group (grp)*
	Description	There is no service entry for server group grp found.
	Action	Correct the command option for server group to make it valid and make sure server group is booted.
	See Also	`scaadmin`
1352	*ERROR: Invalid server name (svrname)*
	Description	The specified `scaadmin` command option server name is not valid or not booted.
	Action	Correct the command option for server name to make it valid and make sure server svrname is booted.
	See Also	`scaadmin`
1353	ERROR: No valid machine entry found
	Description	The specified logical machine id is not valid and can not be found in current Tuxedo configuration.
	Action	Correct the problem by using correct machine id as `scaadmin` command option.
	See Also	`scaadmin`
1354	*ERROR: No service entry found for machine (mach)*
	Description	There is no SCA administrative service found for machine mach.
	Action	Use a valid machine id in the `scaadmin` so that there are SCA server configured and booted.
	See Also	`scaadmin`
1355	ERROR: Group grp is not deployed on mach
	Description	The server goup grp is not configured on machine mach or configured but not booted.
	Action	Use a server group name that is configured and booted on target machine mach.
	See Also	`scaadmin`
1356	ERROR: Group grp is not deployed on mach
	Description	The server goup grp is not configured on machine mach or configured but not booted.
	Action	Use a server group name that is configured and booted on target machine mach.
	See Also	`scaadmin`