System Messages: LIBSCA Catalog 600-699


600	ERROR: Object not found
	Description	An SDO runtime exception occurred in the getSDOValue message
	Action	This exception will be enclosed within an SCA exception giving further information on the location of the error.

601	ERROR: Get value not available on many valued property: propertyname
	Description	An SDO runtime exception occurred due to an attempt to retrieve the value of multi-valued property propertyname using a method that is valid only for single valued properties.
	Action	This exception will be enclosed within an SCA exception giving further information on the location of the error.

602	ERROR: ATMI Binding - workStationParameters/encryptBits minimum encryption strength contains bad character
	Description	The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits consist of only the digits 0 through 9. A character other than a digit was found among the characters before the slash.
	Action	Fix the workStationParameters/encryptBits parameter to match the required syntax.

603	ERROR: ATMI Binding - workStationParameters/encryptBits maximum encryption strength contains bad character
	Description	The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits consist of only the digits 0 through 9. A character other than a digit was found among the characters after the slash.
	Action	Fix the workStationParameters/encryptBits parameter to match the required syntax.

604	ERROR: ATMI Binding - workStationParameters/encryptBits minimum encryption strength string too long
	Description	The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits consist of only the digits 0 through 9. More than 3 digits were found before the slash, and this value is greater than any encryption strength supported by Tuxedo.
	Action	Fix the workStationParameters/encryptBits parameter to match the required syntax.

605	ERROR: ATMI Binding - workStationParameters/encryptBits maximum encryption strength string too long
	Description	The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits consist of only the digits 0 through 9. More than 3 digits were found after the slash, and this value is greater than any encryption strength supported by Tuxedo.
	Action	Fix the workStationParameters/encryptBits parameter to match the required syntax.

606	ERROR: ATMI Binding - workStationParameters/encryptBits unsupported minimum encryption strength value minbits
	Description	The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits must be 0, 40, 56, 128, or 256. An invalid value was specified for minbits.
	Action	Specify a value of 0, 40, 56, 128, or 256 for minbits.

607	ERROR: ATMI Binding - workStationParameters/encryptBits unsupported maximum encryption strength value maxbits
	Description	The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits must be 0, 40, 56, 128, or 256. An invalid value was specified for maxbits.
	Action	Specify a value of 0, 40, 56, 128, or 256 for maxbits.

608	*ERROR: ATMI Binding - workStationParameters/encryptBits minimum encryption strength is stronger than maximum strength (minbits/maxbits)*
	Description	The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits must be less than or equal to maxbits. However, the value specified for minbits was greater than the value specified for maxbits.
	Action	Fix the encryptBits parameter so that minbits is less than or equal to maxbits.

609	*ERROR: Tuxedo service returned VIEW32 data but SCA return type typename* is not DataObjectPtr**
	Description	A Tuxedo service invoked by SCA returned a VIEW32 buffer, but the datatype of the SCA signature for the service was typename instead of DataObjectPtr.
	Action	Fix the SCA service definitions so that the return signature for this service is DataObjectPtr. (Alternatively, change the return type of the Tuxedo service to match the current SCA signature.)

610	*ERROR: Tuxedo service returned VIEW, X_COMMON, or X_C_TYPE data but SCA return type typename* is not DataObjectPtr**
	Description	A Tuxedo service invoked by SCA returned a VIEW, X_COMMON, or X_CTYPE buffer, but the datatype of the SCA signature for the service was typename instead of DataObjectPtr.
	Action	Fix the SCA service definitions so that the return signature for this service is DataObjectPtr. (Alternatively, change the return type of the Tuxedo service to match the current SCA signature.)

611	ERROR: Cannot determine Tuxedo buffer type of input buffer for SCA method methodname
	Description	The ATMI function `tptypes`(3) failed when invoked using the ATMI buffer that was to be sent to the SCA method methodname.
	Action	Contact Oracle Technical Support.
	See Also	`tptypes`(3)
612	ERROR: Tuxedo input buffer type typename not valid for SCA method methodname
	Description	The Tuxedo buffer buffer of type typename that was to be sent to SCA methiod methodname is not of a valid type for that method.
	Action	Check the SCA signatures for method methodname to determine the valid ATMI buffer type(s) for that method and fix the discrepancy.

613	ERROR: SCA service invocation error occurred
	Description	A service invocation within an SCA server has failed. As a result, this service invocation will pass the TPFAIL flag to `tpreturn`(3).
	Action	Refer to previous messages in the userlog to determine the specific cause of the error.

614	ERROR: SCA service invocation error occurred
	Description	A service invocation within an SCA server has failed. As a result, this service invocation will pass the TPFAIL flag to `tpreturn`(3).
	Action	Refer to previous messages in the userlog to determine the specific cause of the error.

615	ERROR: Fchg failed for field fieldname error fmlerror
	Description	The `Fchg`(3) or `Fchg32fieldname of type FLD_LONG.`
	Action	If fmlerror is FNOSPACE, ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Otherwise, contact Oracle Technical Support.
	See Also	`Fchg`(3)
616	ERROR: Fchg failed for field fieldname error fmlerror
	Description	The `Fchg`(3) or `Fchg32fieldname of type FLD_LONG.`
	Action	If fmlerror is FNOSPACE, ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Otherwise, contact Oracle Technical Support.
	See Also	`Fchg`(3)
617	ERROR: ATMI Binding - security principal password returned by callback too long
	Description	The cleartext password returned by the function set by the `setSCAPasswordCallback`(3c) is over 31 characters in length.
	Action	Fix the password callback function so that it returns a password within the allowable length.
	See Also	`setSCAPasswordCallback`(3c)
618	ERROR: Cannot determine buffer type of return buffer from Tuxedo service svcname for SCA method methodname
	Description	When invoking Tuxedo service svcname as part of SCA method methodname, the `tptypes`(3) function failed for the buffer returned by Tuxedo.
	Action	Contact Oracle Technical Support.
	See Also	`tptypes`(3)
619	ERROR: Buffer type buftype returned from Tuxedo service svcname not valid for SCA method methodname
	Description	When invoking Tuxedo service svcname as part of SCA method methodname, the buffer type buftype returned by Tuxedo did not match one of the allowable types for the SCA signature.
	Action	Fix the signature of the SCA service to recognize the type returned by Tuxedo. Alternatively, fix the type returned the Tuxedo service to match the SCA signature.

620	*ERROR: Buffer type buftype* returned on TPFAIL from Tuxedo service svcname not valid for SCA method methodname and configured buffer type errbuftype. Ignoring this buffer.**
	Description	When invoking Tuxedo service svcname as part of SCA method methodname, buffer type errbuftype returned on a service error, but this type does not match the configured error buffer type for the service.
	Action	Fix the error buffer type defined for the SCA service to match the type returned by Tuxedo. Alternatively, fix the type returned by the Tuxedo service on error to match the configured type in SCA.

621	*ERROR: Field fldname* of type FLD_STRING has signature sig instead of expected signature string, char, or char[]*
	Description	A Tuxedo client invoked an SCA service with field fldname but the corresponding SCA signature sig did not match one of the allowable signatures for FLD_STRING.
	Action	Fix the incorrect SCA signature.

622	ERROR: Field fldname of type FLD_CARRAY has signature sig/var> instead of expected signature struct carray_t*
	Description	A Tuxedo client invoked an SCA service with field fldname but the corresponding SCA signature sig did not match the allowable signature for FLD_CARRAY.
	Action	Fix the incorrect SCA signature.

623	*ERROR: Field fldname* of type FLD_CHAR has signature sig instead of expected signature char or bool**
	Description	A Tuxedo client invoked an SCA service with field fldname but the corresponding SCA signature sig did not match one of the allowable signatures for FLD_CHAR.
	Action	Fix the incorrect SCA signature.

624	*ERROR: Field fldname* of type FLD_MBSTRING has signature sig instead of expected signature std::wstring, wchar_t, or wchar_t[]*
	Description	A Tuxedo client invoked an SCA service with field fldname but the corresponding SCA signature sig did not match one of the allowable signatures for FLD_MBSTRING.
	Action	Fix the incorrect SCA signature.

625	*ERROR: Value longval* of field TUX_RTNLONG is outside the range of SCA return parameter of type int**
	Description	A Tuxedo service returned a long integer value in field TUX_RTNLONG which could not fit in the corresponding SCA parameter of type int.
	Action	Use `long` instead of `int` for the SCA parameter.

626	*ERROR: Value unsignedlongval* of field TUX_RTNLONG is outside the range of SCA return parameter of type unsigned int**
	Description	A Tuxedo service returned a long integer value in field TUX_RTNLONG which, when considered as an unsigned long, could not fit in the corresponding SCA parameter of type unsigned int.
	Action	Use `unsigned long` instead of `unsigned int` for the SCA parameter.

627	*ERROR: SCA interface return data type typename* is not allowed**
	Description	An SCA interface returned a value of a type typename that is not allowed in SALT.
	Action	Fix the return type of the SCA service.

628	ERROR: Output buffer type outtype incompatible with return signature rtnsig
	Description	The output buffer of type outtype received from Tuxedo is incompatbile with the SCA return buffer signature rtnsig.
	Action	Fix the SCA return buffer signature or the return type of the Tuxedo service so that they are compatible.

629	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
630	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
631	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
632	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
633	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
634	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
635	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
636	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
637	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
638	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
639	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
640	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
641	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
642	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
643	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
644	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
645	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
646	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
647	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
648	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
649	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
650	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
651	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
652	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
653	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
654	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
655	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
656	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
657	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
658	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
659	ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
	Action	Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
660	ERROR: Cannot set LC_CTYPE locale to locale
	Description	The C++ library function `setlocale()` failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
	Action	Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
661	ERROR: Wide character to multibyte string conversion failed
	Description	Wide character to multibyte string conversion using the `wcstombs` failed.
	Action	Ensure that the wide character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
662	ERROR: Wide character to multibyte string conversion failed
	Description	Wide character to multibyte string conversion using the `wcstombs` failed.
	Action	Ensure that the wide character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
663	ERROR: Wide character to multibyte string conversion failed
	Description	Wide character to multibyte string conversion using the `wcstombs` failed.
	Action	Ensure that the wide character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
664	ERROR: Wide character to multibyte string conversion failed
	Description	Wide character to multibyte string conversion using the `wcstombs` failed.
	Action	Ensure that the wide character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
665	ERROR: Wide character to multibyte string conversion failed
	Description	Wide character to multibyte string conversion using the `wcstombs` failed.
	Action	Ensure that the wide character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
666	ERROR: Wide character to multibyte string conversion failed
	Description	Wide character to multibyte string conversion using the `wcstombs` failed.
	Action	Ensure that the wide character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
667	ERROR: Wide character to multibyte string conversion failed
	Description	Wide character to multibyte string conversion using the `wcstombs` failed.
	Action	Ensure that the wide character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
668	ERROR: Wide character to multibyte string conversion failed
	Description	Wide character to multibyte string conversion using the `wcstombs` failed.
	Action	Ensure that the wide character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
669	ERROR: Multibyte string to wide character conversion failed
	Description	Multibyte string to wide character conversion using the `mbstowcs` function failed.
	Action	Ensure that the multibyte character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
670	ERROR: Multibyte string to wide character conversion failed
	Description	Multibyte string to wide character conversion using the `mbstowcs` function failed.
	Action	Ensure that the multibyte character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
671	ERROR: Multibyte string to wide character conversion failed
	Description	Multibyte string to wide character conversion using the `mbstowcs` function failed.
	Action	Ensure that the multibyte character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
672	ERROR: Multibyte string to wide character conversion failed
	Description	Multibyte string to wide character conversion using the `mbstowcs` function failed.
	Action	Ensure that the multibyte character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
673	ERROR: Multibyte string to wide character conversion failed
	Description	Multibyte string to wide character conversion using the `mbstowcs` function failed.
	Action	Ensure that the multibyte character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
674	ERROR: Multibyte string to wide character conversion failed
	Description	Multibyte string to wide character conversion using the `mbstowcs` function failed.
	Action	Ensure that the multibyte character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
675	ERROR: Multibyte string to wide character conversion failed
	Description	Multibyte string to wide character conversion using the `mbstowcs` function failed.
	Action	Ensure that the multibyte character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
676	ERROR: Multibyte string to wide character conversion failed
	Description	Multibyte string to wide character conversion using the `mbstowcs` function failed.
	Action	Ensure that the multibyte character data used consists of only valid characters for the current locale.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
677	ERROR: Cannot convert from Operation::WCHARS parameter to type
	Description	An attempt to convert an operation parameter declared `wchar_t[]` or `wchar_t` to type type* has been detected. This is an invalid conversion.
	Action	Check that the field table settings and operation method declaration are compatible.
	See Also	Oracle SALT Programming Guide
678	ERROR: Cannot convert from Operation::WSTRING parameter to type
	Description	An attempt to convert an operation parameter declared `wchar_t[]` or `wchar_t` to type type* has been detected. This is an invalid conversion.
	Action	Check that the field table settings and operation method declaration are compatible.
	See Also	Oracle SALT Programming Guide
679	ERROR: Memory allocation error
	Description	An attempt dynamically to allocate memory from the operating system using `malloc()` failed while allocating memory for multibyte string data.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
680	ERROR: Memory allocation error
	Description	An attempt dynamically to allocate memory from the operating system using `malloc()` failed while allocating memory for multibyte string data.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
681	ERROR: Fmbpack32 of FLD_MBSTRING buffer failed with error fmlerror
	Description	An attempt to pack multibyte string data using the `Fmbpack32>`(3) function failed.
	Action	Examine fmlerror to determine the specific action to take.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
682	ERROR: Fmbpack32 of FLD_MBSTRING buffer failed with error fmlerror
	Description	An attempt to pack multibyte string data using the `Fmbpack32>`(3) function failed.
	Action	Examine fmlerror to determine the specific action to take.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
683	ERROR: Fmbpack32 of FLD_MBSTRING field fldname failed with error fmlerror
	Description	An attempt to pack multibyte string data into field fldname using the `Fmbpack32>`(3) function failed.
	Action	Examine fmlerror to determine the specific action to take.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
684	ERROR: Fmbpack32 of FLD_MBSTRING field fldname failed with error fmlerror
	Description	An attempt to pack multibyte string data into field fldname using the `Fmbpack32>`(3) function failed.
	Action	Examine fmlerror to determine the specific action to take.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
685	ERROR: Fmbpack32 of FLD_MBSTRING buffer failed with error fmlerror
	Description	An attempt to pack multibyte string data using the `Fmbpack32>`(3) function failed.
	Action	Examine fmlerror to determine the specific action to take.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
686	ERROR: Fmbpack32 of FLD_MBSTRING buffer failed with error fmlerror
	Description	An attempt to pack multibyte string data using the `Fmbpack32>`(3) function failed.
	Action	Examine fmlerror to determine the specific action to take.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
687	ERROR: Fmbunpack32 of FLD_MBSTRING field failed with error fmlerror
	Description	An attempt to unpack multibyte string data using the `Fmbunpack32>`(3) function failed.
	Action	Examine fmlerror to determine the specific action to take.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
688	ERROR: Fmbunpack32 of FLD_MBSTRING field failed with error fmlerror
	Description	An attempt to unpack multibyte string data using the `Fmbunpack32>`(3) function failed.
	Action	Examine fmlerror to determine the specific action to take.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
689	ERROR: Fmbunpack32 of FLD_MBSTRING field failed with error fmlerror
	Description	An attempt to unpack multibyte string data using the `Fmbunpack32>`(3) function failed.
	Action	Examine fmlerror to determine the specific action to take.
	See Also	Multibyte String Data Mapping in the Oracle SALT Programming Guide.
690	*ERROR: ATMI Binding - buftype* output buffer not supported in this release**
	Description	Output buffer type buftype is not supported in this release of SALT SCA.
	Action	Change the SCA and/or Tuxedo code to use a supported buffer type as documented in the Oracle SALT Programming Guide.
	See Also	Oracle SALT Programming Guide
691	ERROR: Empty input data
	Description	Empty FLD_MBSTRING input data was found for the SALT SCA Web Services binding.
	Action	Do not use empty FLD_MBSTRING data in the SALT SCA Web Services binding.

692	Types mismatch for field fldname
	Description	A type other than SCA Type::BytesType was found corresponding to FLD_CARRAY field fldname.
	Action	Fix the SCA service signature so it is compatible with the Tuxedo service data.

693	Types mismatch for field fldname
	Description	A type other than SCA Type::IntegerType or Type::StringType was found corresponding to FLD_STRING field fldname.
	Action	Fix the SCA service signature so it is compatible with the Tuxedo service data.

694	Types mismatch for field fldname
	Description	A type other than SCA Type::LongType, Type::IntegerType, or Type::StringType was found corresponding to FLD_LONG field fldname.
	Action	Fix the SCA service signature so it is compatible with the Tuxedo service data.

695	Types mismatch for field fldname
	Description	A type other than SCA Type::ShortType was found corresponding to FLD_SHORT field fldname.
	Action	Fix the SCA service signature so it is compatible with the Tuxedo service data.

696	Types mismatch for field fldname
	Description	A type other than SCA Type::ByteType or Type::BooleanType was found corresponding to FLD_CHAR field fldname.
	Action	Fix the SCA service signature so it is compatible with the Tuxedo service data.

697	Types mismatch for field fldname
	Description	A type other than SCA Type::DoubleType was found corresponding to FLD_DOUBLE field fldname.
	Action	Fix the SCA service signature so it is compatible with the Tuxedo service data.

698	Types mismatch for field fldname
	Description	A type other than SCA Type::FloatType was found corresponding to FLD_FLOAT field fldname.
	Action	Fix the SCA service signature so it is compatible with the Tuxedo service data.

699	Types mismatch for field fldname
	Description	A type other than SCA Type::StringType was found corresponding to FLD_MBSTRING field fldname.
	Action	Fix the SCA service signature so it is compatible with the Tuxedo service data.