System Messages: WSCMD Catalog 1300-1399


1300	ERROR: Unlicensed System Binary
	Description	A valid license file has not been installed in $TUXDIR/udataobj/lic.txt. This license file must have a section for SALT with the specific version number..
	Action	Buy a license and install the provided file in udataobj/lic.txt.

1301	ERROR: Expired System Binary
	Description	Your copy of the Oracle SALT software is an evaluation copy, and the expiration date has passed.
	Action	If you wish to continue using the Oracle SALT, contact the company from which you received the product.

1302	ERROR: Invalid option: option
	Description	`wsadmin`(1) has been invoked with an invalid option. The offending option is printed with this error message.
	Action	Verify options to `wsadmin` and re-execute the command.
	See Also	`wsadmin`(1)
1303	ERROR: Invalid argument: argument
	Description	`wsadmin`(1) has been invoked with an invalid argument. The offending option and argument are printed with this error message.
	Action	Verify options to `wsadmin` and re-execute the command.
	See Also	`wsadmin`(1)
1304	ERROR: TUXCONFIG environment variable not set.
	Description	The TUXCONFIG environment variable was not set. `wsadmin` command failed.
	Action	Set the TUXCONFIG environment variable to the pathname of the TUXCONFIG file.
	See Also	`wsadmin`(1)
1305	ERROR: TUXCONFIG must be an absolute pathname.
	Description	When executing `wsadmin`, the `TUXCONFIG` environment variable is not a rooted (full) pathname.
	Action	Re-set the `TUXCONFIG` value to a rooted path for the ubb configuration file.
	See Also	`wsadmin`(1)
1306	*Usage: wsadmin* [-r] [-v]**
	Description	Invalid use of `wsadmin`.
	Action	Follow the "Usage:" hint.
	See Also	`wsadmin`(1)
1307	ERROR: Error while obtaining the Bulletin Board parameters
	Description	An error was produced in `wsadmin` while retrieving the Bulletin Board parameters. A more specific error explaining the situation should already exist in the user log.
	Action	Check the user log for a more specific error message. Check that the TUXCONFIG is readable, and re-execute the `wsadmin` command.
	See Also	`wsadmin`(1)
1308	ERROR: Could not determine level of authentication required.
	Description	When `wsadmin` starts up, it calls `tpchkauth`(3c) to see what level of authentication is required by the application. This message is issued when `tpchkauth`(3c) fails. `tpchkauth`(3c) can fail if `wsadmin` cannot find the `TUXCONFIG` file.
	Action	Make sure the `TUXCONFIG` environment variable is set correctly.
	See Also	`wsadmin`(1)
1309	ERROR: Could not allocate internal TPINIT typed buffer.
	Description	Executing the `wsadmin` command error. An error was encountered while trying to obtain virtual memory for the `TPINIT` buffer.
	Action	Attempt to identify and stop any extraneous processes to free up virtual memory on your system, and then retry the command.
	See Also	`wsadmin`(1)
1310	*ERROR: Could not find entry for user UID.*
	Description	When `wsadmin` is invoked, the invoker's login ID is used as the "User Name" when `wsadmin` joins the application. If there is an error retrieving the invoker's login ID from the system password file, this message is printed.
	Action	Contact your system administrator to ensure that your password entry contains your user ID (UID) and your login.
	See Also	`wsadmin`(1)
1312	ERROR: Unable to obtain application password.
	Description	If an application password is required, `wsadmin` either prompts for it (if the invoker is attached to a terminal), or it reads it from the environment variable, `APP_PW`, if standard input is not a terminal. This message is issued when the password cannot be obtained. The most common cause for this is that `APP_PW` is not set and standard input is not a terminal.
	Action	If `wsadmin` is not attached to a terminal when invoked, then check that the environment variable, `APP_PW`, is set correctly.
	See Also	`wsadmin`(1)
1313	ERROR: can't become a client - tpinit() failed - string
	Description	Execution of `wsadmin` failed because the user could not join the application. The printed string indicates the reason for the failure. This message can be printed either because no more clients can join the application or because the user failed security permissions.
	Action	If the reason is that no more clients can join the application, re-try the operation a later time. The system should be configured to allow for more clients.
	See Also	`wsadmin`(1)
1316	WARN: Cannot become administrator.
	Description	The `wsadmin` program was not able to enter the administrative mode. A limited set of commands is available (that is, the set of commands available when `wsadmin` is run with the -r option).
	Action	No action required.
	See Also	`wsadmin`(1)
1319	*ERROR: Error executing string.*
	Description	A command was given to `wsadmin` that was to be executed by the shell. An error was encountered by the shell in executing the command.
	Action	Retry the command. If it continues to fail, refer to the `system`(3S) manual page for reasons why the command may have failed.
	See Also	`system`(3S) in UNIX reference manuals
1320	*ERROR: -char* option: argument must be numeric.**
	Description	When the -char option is used as an argument to the `wsadmin` sub-command, its argument must be a numeric value.
	Action	Try the command again with the numeric value for the char option.
	See Also	`wsadmin`(1)
1326	*ERROR: Can't allocate memory. (IC=code)*
	Description	`wsadmin` detected an error while trying to process the operation specified by the value code. The process was unable to obtain enough virtual memory. The value code is an internal error code for use in diagnosis.
	Action	Attempt to identify and stop any extraneous processes to free up virtual memory on your system.
	See Also	`wsadmin`(1)
1327	*ERROR: Can't perform the operation. Please check the ULOG for more descriptive message. (IC=code)*
	Description	`wsadmin` detected an error while trying to process the operation specified by the value code. The process was unable to perform the operation. The value code is an internal error code for use in diagnosis. The `ULOG` will contain more specific information.
	Action	Check the `ULOG` for more specific information on the cause of the error. Correct the cause of the error and retry the operation.
	See Also	`wsadmin`(1)
1328	ERROR: gwws_instance_id value is not valid
	Description	The gwws_instance_id given to the `wsadmin sub-command is not valid.`
	Action	Please refer to `SALTCONFIG` for the syntax of GWWS instance id value.
	See Also	`wsadmin`(1), `Oracle SALT Administration Guide`
1329	ERROR: gwws instance is not present
	Description	`wsadmin` detected the specified `GWWS` instance is not available. Either the `GWWS` process is not configured in the UBBCONFIG, or the process is not booted.
	Action	Check if the specified GWWS instance is configured in the `SALTCONFIG` as well as in the `UBBCONFIG`. If not, please refer to Oracle SALT administration Guide to configure the desired GWWS instance properly. If your configuration is correct, please check if the specified `GWWS` process is down. Start it using Tuxedo administrative command if necessary.
	See Also	`Oracle SALT Administration Guide`, `wsadmin`(1), `GWWS(1)`
1330	*ERROR: call gwws service error(tperrno=code)*
	Description	`wsadmin` detected an error while trying to invoke the specified `GWWS` process. The value code indicates the `tperrno` of the invocation.
	Action	Check if the specified `GWWS` process is started and the status is healthy. Check the meaning of the `tperrno` value to help diagnose the process' status.
	See Also	`wsadmin`(1), `GWWS`(1)
1336	INFO: Ignore duplicated option.("`optionName`")
	Description	`wsadmin` detected a duplicated option.
	Action	Information message for reference.
	See Also	`wsadmin`(1)
1337	ERROR: Missing argument for option "`optionName`".
	Description	`wsadmin` detected missing argument for option `optionName`.
	Action	Correct the command entered, and retry it.
	See Also	`wsadmin`(1)
1338	ERROR: Invalid option "`optionName` for SAML subcommand "`subcmd`".
	Description	`wsadmin` detected an invalid option "`optionName`" for SAML key metadata manipulating sub-command "`subcmd`" was entered.
	Action	Correct the command entered.
	See Also	`wsadmin`(1)
1339	ERROR: Missing required option "`optionName`" for SAML subcommand "`subcmd`".
	Description	`wsadmin` detected missing required option "`optionName`" for SAML key meta data manipulating sub-command "`subcmd`.
	Action	Correct the command entered.
	See Also	`wsadmin`(1)
1340	ERROR: Either option "`opt1`" or option "`opt2`" must be specified for SAML subcommand "`subcmd`".
	Description	Either "`opt1`" or "`opt2`" must be entered for SAML key meta data manipulating sub-command "`subcmd`.
	Action	Correct the command entered.
	See Also	`wsadmin`(1)
1341	ERROR: Invalid SAML subcommand "`subcmd`".
	Description	An invalid SAML key metadata manipulating subcommand was entered.
	Action	Use the supported SAML sub-command.
	See Also	`wsadmin`(1)
1342	ERROR: Unrecognized option(`opt`) either "-g" or "-i" option must be specified.
	Description	An unrecoginized option `opt` was detected, either "-g" or "-i" option must be specified.
	Action	Correct the command entered.
	See Also	`wsadmin`(1)
1343	ERROR: Unsupported option data(`optData`) for "-g" option.
	Description	Unsupported option data `optData` was entered for "-g" option.
	Action	Correct the command entered by removing `optData`.
	See Also	`wsadmin`(1)
1344	ERROR: Unsupported option data(`optData`) for "-i" option.
	Description	Unsupported option data `optData` was entered for "-i" option.
	Action	Correct the command entered.
	See Also	`wsadmin`(1)