|
3502
|
ERROR: APP_PW requires password to be specified in TUXCONFIG file
|
|
Description
|
An error was detected by the Domain Administrative server while processing a MIB request. In order for the TA_DMSECURITY parameter of a local access point (T_DM_LOCAL class) to be set to APP_PW , the application security (RESOURCES section of the UBBCONFIG file) must be set to APP_PW .
|
Action
|
Set the SECURITY (in RESOURCES section of the UBBCONFIG ) to APP_PW , run tmloadcf on the UBBCONFIG file, and then retry the operation.
|
See Also
|
DMIB (5), ubbconfig (5)
|
3503
|
ERROR: Unknown SECURITY type <security_type>. Only NONE, APP_PW, DM_PW and CLEAR, SAFE and PRIVATE, for TOPEND gateways, are recognized
|
|
Description
|
The TA_DMSECURITY attribute security_type in the T_DM_LOCAL MIB class is invalid. (CLEAR , SAFE , and PRIVATE are the security parameters recognized by the TOP END Domain Gateway.)
|
Action
|
Specify a valid value and resubmit the request
|
See Also
|
DMIB (5), dmconfig (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3504
|
ERROR: Unknown TA_DMCONNECTION_POLICY <value>.
|
|
Description
|
The TA_DMCONNECTION_POLICY attribute in the T_DM_LOCAL class is set to an invalid value. Only ON_DEMAND, ON_STARTUP, and INCOMING_ONLY are recognized
|
Action
|
Correct the attribute and retry the operation.
|
See Also
|
DMIB (5), dmconfig (5)
|
3505
|
ERROR: Cannot access $TUXDIR/udataobj/DMTYPE to validate TA_DMTYPE
|
|
Description
|
The Domain type specified in the TA_DMTYPE attribute (TDOMAIN/OSITP/... ) cannot be validated because the file specified in the error message cannot be accessed.
|
Action
|
The problem may be that of a missing file, or incorrect permissions to the file or to a directory in the pathname of the file. Correct the problem.
|
|
|
3506
|
ERROR: TA_DMTYPE must match one in $TUXDIR/udataobj/DMTYPE
|
|
Description
|
The Domain type specified in the request does not exist in the $TUXDIR/udataobj/DMTYPE file.
|
Action
|
Check whether the correct domain type is specified in TA_DMTYPE , and also check if the software for this domain type has been installed.
|
|
|
3509
|
ERROR: TA_DMACCESSPOINTID must be unique across local & remote access points
|
|
Description
|
An error was detected by the Domain Administrative server while processing a MIB request. The TA_DMACCESSPOINTID attribute specified was found to be a duplicate of a TA_DMACCESSPOINTID attribute of an existing entry in either of the T_DM_LOCAL or T_DM_REMOTE classes.
|
Action
|
Correct the value of the TA_DMACCESSPOINTID attribute and retry the operation.
|
See Also
|
DMIB (5)
|
3510
|
ERROR: TA_DMACCESSPOINTID must be unique across local & remote access points
|
|
Description
|
An error was detected by the Domain Administrative server while processing a MIB request. The TA_DMACCESSPOINTID attribute specified was found to be a duplicate of a TA_DMACCESSPOINTID attribute of an existing entry in either of the T_DM_LOCAL or T_DM_REMOTE classes.
|
Action
|
Correct the value of the TA_DMACCESSPOINTID attribute and retry the operation.
|
See Also
|
DMIB (5)
|
3513
|
ERROR: TA_DMNWDEVICE must be an absolute pathname
|
|
Description
|
The value of TA_DMNWDEVICE attribute in a T_DM_TDOMAIN class instance must be an absolute pathname.
|
Action
|
Change the value for the TA_DMNWDEVICE to an absolute pathname and retry the operation.
|
See Also
|
DMIB (5), dmconfig (5)
|
3517
|
ERROR: TA_DMAET=<string> is in an invalid format (IC = number)
|
|
Description
|
The value of TA_DMAET attribute in the T_DM_OSITP class MIB request is in invalid format.
|
Action
|
Specify a valid value and resubmit the request.
|
See Also
|
DMIB (5)
|
3518
|
ERROR: If TA_DMAPT is an Object Identifier, then TA_DMAEQ must be an integer
|
|
Description
|
If the TA_DMAPT attribute of the T_DM_OSITP class is an object identifier, then TA_DMAEQ attribute for that class must be an integer value.
|
Action
|
Specify a valid value for the TA_DMAEQ attribute and resubmit the request.
|
See Also
|
DMIB (5)
|
3519
|
ERROR: Unable to access TUXCONFIG file
|
|
Description
|
The Oracle TUXEDO Configuration file indicated by the environment variable TUXCONFIG is not accessible.
|
Action
|
Check for the presence of the $TUXCONFIG file and also check the permissions of the file along with permissions of directories in its pathname. Correct the problem and reboot the DMADM server.
|
|
|
3522
|
ERROR: TA_DMTE_TP_SYSTEM - invalid characters.
|
|
Description
|
While processing a T_DM_TOPEND class MIB request, an invalid value was detected for the TA_DMTE_TP_SYSTEM parameter. The field contains invalid characters.
|
Action
|
Remove the invalid characters and reattempt the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
|
3523
|
ERROR: _dmcf_open failed: Can't open DM_RESOURCES section
|
|
Description
|
During a MIB request to add a new instance of the T_DM_TOPEND class, an error occurred while retrieving the encryption key from the DM_RESOURCES section of the BDMCONFIG file. The section could not be opened.
|
Action
|
Make sure that the BDMCONFIG file still exists.
|
See Also
|
dmconfig for GWTOPEND (5)
|
3524
|
ERROR: _dmcf_seek failed: Can't seek to DM_RESOURCES section
|
|
Description
|
During a MIB request to add a new instance of the T_DM_TOPEND class, an error occurred while retrieving the encryption key from the DM_RESOURCES section. The section could not be accessed.
|
Action
|
Make sure that the BDMCONFIG file still exists.
|
See Also
|
dmconfig for GWTOPEND (5)
|
3525
|
ERROR: TA_DMNWDEVICE must be an absolute pathname
|
|
Description
|
The value of TA_DMNWDEVICE attribute in a T_DM_TOPEND class instance must be an absolute pathname.
|
Action
|
Change the value for the TA_DMNWDEVICE to an absolute pathname and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
|
3527
|
ERROR: Multiple local access point entries not allowed in T_DM_TOPEND class
|
|
Description
|
Within the T_DM_TOPEND class, only a single entry may exist for a local access point. The T_DM_TOPEND class instance being added in the MIB request represents a local access point that already exists in the configuration.
|
Action
|
Change the local access point and reattempt the operation, or delete the existing T_DM_TOPEND class instance.
|
See Also
|
DMIB (5), dmadmin (1), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3528
|
ERROR: multiple TOPEND remote access point addresses must have matching TA_DMTE_TP_SYSTEM attribute values
|
|
Description
|
For configurations in which multiple remote domain access points instances are specified with the same access point name for failover processing purposes, all TA_DMTE_TP_SYSTEM attributes must have matching values. The value of the TA_DMTE_TP_SYSTEM parameter for the entry being processed violates this rule.
|
Action
|
Change the TA_DMTE_TP_SYSTEM attribute value to match the other T_DM_TOPEND class instances for the remote access point (TA_DMRACCESSPOINT ) and reattempt the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3529
|
ERROR: TUXCONFIG environment variable not set.
|
|
Description
|
While executing DMADM , the TUXCONFIG environment variable has not been set and exported.
|
Action
|
Set and export the TUXCONFIG environment variable and re-start DMADM .
|
See Also
|
DMADM (5)
|
3530
|
ERROR: TUXCONFIG environment variable must be an absolute pathname.
|
|
Description
|
The value of the TUXCONFIG environment variable must be an absolute pathname. Relative paths and environment variables are not allowed.
|
Action
|
Correct the value for the TUXCONFIG environment variable to be an absolute pathname.
|
See Also
|
DMADM (5)
|
3531
|
ERROR: Error in reading TUXCONFIG file.
|
|
Description
|
The DMADM administrative server cannot read TUXCONFIG file. Since the application must be booted for dynamic reconfiguration to occur and booting requires reading the configuration file, this error should not normally occur. It may indicate that the configuration file has been destroyed or that a disk problem has occurred.
|
Action
|
Shut down the application and re-generate the TUXCONFIG file.
|
See Also
|
DMADM (5), dmconfig (5)
|
3532
|
ERROR: Duplicate (routname type:subtype) (value) occurs in T_DM_ROUTING class.
|
|
Description
|
Duplicate entries were found in the T_DM_ROUTING class instance. TA_DMROUTINGNAME and type/subtype together constitute the key.
|
Action
|
Modify the entries so that no /type/subtype pair is specified for a particular TA_DMROUTINGNAME more than once. Resubmit the MIB request.
|
See Also
|
DMIB (5)
|
3533
|
ERROR: Duplicate type/subtype(value) occurs in TA_DMBUFTYPE of T_DM_ROUTING class.
|
|
Description
|
The TA_DMBUFTYPE attribute in the T_DM_ROUTING MIB class request specified duplicate type/subtype pairs. (For types without any subtype specified, the TA_DMBUFTYPE parameter specified duplicate type pairs.)
|
Action
|
Modify the TA_DMBUFTYPE attribute so that the same type/subtype pair is not specified more than once. Resubmit he MIB request.
|
See Also
|
DMIB (5)
|
3534
|
ERROR: _dmcf_open failed: Can't open DM_RESOURCES section
|
|
Description
|
While re-encrypting passwords in the T_DM_PASSWORDS MIB class, the DM_RESOURCES section of BDMCONFIG file cannot be opened for reading.
|
Action
|
Make sure that the BDMCONFIG file still exists.
|
See Also
|
DMIB (5), dmconfig (5)
|
3536
|
ERROR: _dmcf_seek failed: Can't seek to DM_RESOURCES section
|
|
Description
|
While re-encrypting passwords in the T_DM_PASSWORDS MIB class, the DM_RESOURCES section of BDMCONFIG file cannot be accessed for reading.
|
Action
|
Make sure that the BDMCONFIG file still exists.
|
See Also
|
dmconfig (5)
|
3537
|
ERROR: Cannot create encryption key
|
|
Description
|
When re-encrypting passwords by setting the T_DM_PASSWORD class TA_STATE attribute to RECRYPT , the new passwords are encrypted before writing to the BDMCONFIG file. This message is issued when the key used for encrypting new passwords cannot be generated because memory for the key cannot be dynamically allocated from the operating system using malloc .
|
Action
|
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
|
See Also
|
DMIB (5), dmconfig (5)
|
3538
|
ERROR: _dmcf_open failed: Can't open DM_PASSWORDS section
|
|
Description
|
While re-encrypting passwords in the T_DM_PASSWORD MIB class, the DM_PASSWORDS section of BDMCONFIG file cannot be opened for reading.
|
Action
|
Make sure that the BDMCONFIG file still exists.
|
See Also
|
DMIB (5), dmconfig (5)
|
3539
|
ERROR: _dmcf_write failed: Can't write entry in DM_PASSWORDS section
|
|
Description
|
While re-encrypting passwords in the T_DM_PASSWORD MIB class, the DM_PASSWORDS section of BDMCONFIG file cannot be accessed for writing the new re-encrypted entries.
|
Action
|
Make sure that the BDMCONFIG file still exists.
|
See Also
|
DMIB (5), dmconfig (5)
|
3540
|
ERROR: _dmcf_open failed: Can't open DM_TOPEND section
|
|
Description
|
During an attempt to re-encrypt Oracle TOP END passwords, the DM_TOPEND section of the BDMCONFIG could not be opened.
|
Action
|
Make sure that the BDMCONFIG file still exists.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
|
3541
|
ERROR: _dmcf_write failed: Can't write entry in DM_TOPEND section
|
|
Description
|
During an attempt to re-encrypt Oracle TOP END passwords, the DMADM administrative server was unable to write an updated T_DM_TOPEND class instance to the BDMCONFIG file.
|
Action
|
Contact your Oracle Customer Support.
|
|
|
3542
|
ERROR: _dmcf_write failed: Can't write new DMKEY in DM_RESOURCES section
|
|
Description
|
While re-encrypting passwords in T_DM_PASSWORD MIB class, the DM_RESOURCES section of BDMCONFIG file cannot be accessed for writing the new TA_DMKEY value.
|
Action
|
Make sure that the BDMCONFIG file still exists.
|
See Also
|
DMIB (5), dmconfig (5)
|
3543
|
ERROR: TA_DMTE_PRODUCT and TA_DMTE_FUNCTION required for entries of type SERVICE or QNAME
|
|
Description
|
The (T_DM_EXPORT ) class MIB request of type SERVICE or QNAME for TOP END did not have either a TA_DMTE_PRODUCT or a TA_DMTE_FUNCTION attribute value specified. Both TA_DMTE_PRODUCT and TA_DMTE_FUNCTION attribute values must be present for TOP END SERVICE and QNAME entries.
|
Action
|
Correct the MIB request to include both TA_DMTE_PRODUCT and TA_DMTE_FUNCTION attribute values.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3544
|
ERROR: TA_DMREMOTENAME not allowed for TOP END T_DM_EXPORT entries of type SERVICE
|
|
Description
|
A T_DM_EXPORT MIB request specified an invalid Oracle TOP END service entry parameter. The TA_DMREMOTENAME parameter is not allowed for Oracle TOP END entries of type SERVICE .
|
Action
|
Remove the TA_DMREMOTENAME parameter from the entry and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3545
|
ERROR: TA_DMTE_RTQGROUP not allowed for TOP END T_DM_EXPORT entries of type SERVICE
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_RTQGROUP parameter is not allowed for Oracle TOP END entries of type SERVICE .
|
Action
|
Remove the TA_DMTE_RTQGROUP attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3546
|
ERROR: TA_DMTE_RTQNAME not allowed for TOP END T_DM_EXPORT entries of type SERVICE
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_RTQNAME parameter is not allowed for Oracle TOP END entries of type SERVICE .
|
Action
|
Remove the TA_DMTE_RTQNAME attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3547
|
ERROR: TA_DMCODEPAGE not allowed for TOP END T_DM_EXPORT entries of type SERVICE
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMCODEPAGE parameter is not allowed for Oracle TOP END entries of type SERVICE .
|
Action
|
Remove the TA_DMCODEPAGE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3548
|
ERROR: TA_DMTE_RTQGROUP and TA_DMTE_RTQNAME required for QSPACE entries
|
|
Description
|
The T_DM_EXPORT MIB request did not specify all required Oracle TOP END queue space entry parameters. Both the TE_RTQGROUP and TE_RTQNAME parameters are required for Oracle TOP END entries of type QSPACE .
|
Action
|
Modify the MIB request to include both the TA_DMTE_PRODUCT and TA_DMTE_FUNCTION attribute values and retry the operation.
|
See Also
|
dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3549
|
ERROR: QSPACE entries must not have TA_DMINBUFTYPE specified
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMINBUFTYPE parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMINBUFTYPE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3550
|
ERROR: QSPACE entries must not have TA_DMOUTBUFTYPE specified
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMOUTBUFTYPE parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMOUTBUFTYPE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3551
|
ERROR: TA_DMREMOTENAME not allowed for TOP END T_DMEXPORT entries of type QSPACE
|
|
Description
|
A T_DM_EXPORT MIB request specified an invalid Oracle TOP END service entry parameter. The TA_DMREMOTENAME parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMREMOTENAME parameter from the entry and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3552
|
ERROR: TA_DMCONV not allowed for TOP END T_DM_EXPORT entries of type QSPACE
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMCONV parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMCONV attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3553
|
ERROR: TA_DMTE_PRODUCT not allowed for TOP END T_DM_EXPORT entries of type QSPACE
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_PRODUCT parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMTE_PRODUCT attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3554
|
ERROR: TA_DMTE_FUNCTION not allowed for TOP END T_DMEXPORT entries of type QSPACE
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_FUNCTION parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMTE_FUNCTION attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3555
|
ERROR: TA_DMTE_QUALIFIER not allowed for TOP END T_DM_EXPORT entries of type QSPACE
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_QUALIFIER parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMTE_QUALIFIER attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3556
|
ERROR: TA_DMCODEPAGE not allowed for TOP END T_DM_EXPORT entries of type QSPACE
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMCODEPAGE parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMCODEPAGE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3557
|
ERROR: TA_DMACLNAME not allowed for TOP END T_DM_EXPORT entries of type QNAME
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMACLNAME parameter is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMACLNAME attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3558
|
ERROR: QNAME entries must not have TA_DMOUTBUFTYPE specified
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMOUTBUFTYPE parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMOUTBUFTYPE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3559
|
ERROR: TA_DMTE_PRODUCT and TA_DMTE_FUNCTION required for entries of type SERVICE or QNAME
|
|
Description
|
The (T_DM_EXPORT ) class MIB request of type SERVICE or QNAME for TOP END did not have either a TA_DMTE_PRODUCT or a TA_DMTE_FUNCTION attribute value specified. Both TA_DMTE_PRODUCT and TA_DMTE_FUNCTION attribute values must be present for TOP END SERVICE and QNAME entries.
|
Action
|
Correct the MIB request to include both TA_DMTE_PRODUCT and TA_DMTE_FUNCTION attribute values.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3560
|
ERROR: TA_DMREMOTENAME not allowed for TOP END T_DMEXPORT entries of type QNAME
|
|
Description
|
A T_DM_EXPORT MIB request specified an invalid Oracle TOP END service entry parameter. The TA_DMREMOTENAME parameter is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMREMOTENAME parameter from the entry and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3561
|
ERROR: TA_DMCONV not allowed for TOP END T_DM_EXPORT entries of type QNAME
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMCONV parameter is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMCONV attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3562
|
ERROR: TA_DMTE_RTQGROUP not allowed for TOP END T_DM_EXPORT entries of type QNAME
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_RTQGROUP parameter is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMTE_RTQGROUP attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3563
|
ERROR: TA_DMTE_RTQNAME not allowed for TOP END T_DM_EXPORT entries of type QNAME
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_RTQNAME parameter is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMTE_RTQNAME attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3564
|
ERROR: TA_DMCODEPAGE not allowed for TOP END T_DM_EXPORT entries of type QNAME
|
|
Description
|
The T_DM_EXPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMCODEPAGE parameter is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMCODEPAGE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3565
|
ERROR: TOP END T_DM_EXPORT entries must specify a TA_DMTYPE of SERVICE, QSPACE or QNAME
|
|
Description
|
The T_DM_EXPORT MIB request did not specify a valid TA_DMTYPE attribute.
|
Action
|
Modify the MIB request to correct the TA_DMTYPE attribute value and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3566
|
ERROR: TA_DMINBUFTYPE for TOP END domains limited to FML32, CARRAY, or X_OCTET
|
|
Description
|
The T_DM_EXPORT MIB request did not specify a valid TA_DMINBUFTYPE attribute. The TOP END domain gateway only supports FML32 , CARRAY , and X_OCTET buffer types.
|
Action
|
Correct the MIB request giving a supported value to the TA_DMINBUFTYPE attribute and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3567
|
ERROR: TA_DMOUTBUFTYPE for TOP END domains limited to FML32, CARRAY, or X_OCTET
|
|
Description
|
The T_DM_EXPORT MIB request did not specify a valid TA_DMOUTBUFTYPE attribute. The TOP END domain gateway only supports FML32 , CARRAY , and X_OCTET buffer types.
|
Action
|
Correct the MIB request giving a supported value to the TA_DMOUTBUFTYPE attribute and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3568
|
ERROR: TA_DMREMOTENAME not allowed for TOP END T_DM_IMPORT entries of type SERVICE
|
|
Description
|
A T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMREMOTENAME attribute is not allowed for Oracle TOP END entries of type SERVICE .
|
Action
|
Remove the TA_DMREMOTENAME attribute from the entry and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3569
|
ERROR: TA_DMTE_PRODUCT and TA_DMTE_FUNCTION required for entries of type SERVICE or QNAME
|
|
Description
|
The (T_DM_IMPORT ) class MIB request of type SERVICE or QNAME for TOP END did not have either a TA_DMTE_PRODUCT or a TA_DMTE_FUNCTION attribute value specified. Both TA_DMTE_PRODUCT and TA_DMTE_FUNCTION attribute values must be present for TOP END SERVICE and QNAME entries.
|
Action
|
Correct the MIB request to include both TA_DMTE_PRODUCT and TA_DMTE_FUNCTION attribute values.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3570
|
ERROR: TA_DMTE_RTQGROUP not allowed for TOP END T_DM_IMPORT entries of type SERVICE
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_RTQGROUP parameter is not allowed for Oracle TOP END entries of type SERVICE .
|
Action
|
Remove the TA_DMTE_RTQGROUP attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3571
|
ERROR: TA_DMTE_RTQNAME not allowed for TOP END T_DM_IMPORT entries of type SERVICE
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_RTQNAME parameter is not allowed for Oracle TOP END entries of type SERVICE .
|
Action
|
Remove the TA_DMTE_RTQNAME attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3572
|
ERROR: TA_DMCODEPAGE not allowed for TOP END T_DM_IMPORT entries of type SERVICE
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMCODEPAGE parameter is not allowed for Oracle TOP END entries of type SERVICE .
|
Action
|
Remove the TA_DMCODEPAGE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3573
|
ERROR: QSPACE entries must not have TA_DMINBUFTYPE specified
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMINBUFTYPE parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMINBUFTYPE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3574
|
ERROR: QSPACE entries must not have TA_DMOUTBUFTYPE specified
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMOUTBUFTYPE parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMOUTBUFTYPE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3575
|
ERROR: TA_DMREMOTENAME not allowed for TOP END T_DM_IMPORT entries of type QSPACE
|
|
Description
|
A T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMREMOTENAME attribute is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMREMOTENAME attribute from the entry and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3576
|
ERROR: TA_DMTE_RTQGROUP and TA_DMTE_RTQNAME required for QSPACE entries
|
|
Description
|
The T_DM_IMPORT MIB request did not specify all required Oracle TOP END queue space entry parameters. Both the TE_RTQGROUP and TE_RTQNAME parameters are required for Oracle TOP END entries of type QSPACE .
|
Action
|
Modify the MIB request to include both the TA_DMTE_PRODUCT and TA_DMTE_FUNCTION attribute values and retry the operation.
|
See Also
|
dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3577
|
ERROR: TA_DMCONV not allowed for TOP END T_DM_IMPORT entries of type QSPACE
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMCONV parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMCONV attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3578
|
ERROR: TA_DMTE_PRODUCT not allowed for TOP END T_DM_IMPORT entries of type QSPACE
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_PRODUCT parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMTE_PRODUCT attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3579
|
ERROR: TA_DMTE_FUNCTION not allowed for TOP END T_DM_IMPORT entries of type QSPACE
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_FUNCTION parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMTE_FUNCTION attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3580
|
ERROR: TA_DMTE_QUALIFIER not allowed for TOP END T_DM_IMPORT entries of type QSPACE
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_QUALIFIER parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMTE_QUALIFIER attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3581
|
ERROR: T_DMCODEPAGE not allowed for TOP END T_DM_IMPORT entries of type QSPACE
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMCODEPAGE parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMCODEPAGE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3582
|
ERROR: TA_DMTE_PRODUCT and TA_DMTE_FUNCTION required for entries of type SERVICE or QNAME
|
|
Description
|
The (T_DM_IMPORT ) class MIB request of type SERVICE or QNAME for TOP END did not have either a TA_DMTE_PRODUCT or a TA_DMTE_FUNCTION attribute value specified. Both TA_DMTE_PRODUCT and TA_DMTE_FUNCTION attribute values must be present for TOP END SERVICE and QNAME entries.
|
Action
|
Correct the MIB request to include both TA_DMTE_PRODUCT and TA_DMTE_FUNCTION attribute values.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3583
|
ERROR: QNAME entries must not have TA_DMOUTBUFTYPE specified
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMOUTBUFTYPE parameter is not allowed for Oracle TOP END entries of type QSPACE .
|
Action
|
Remove the TA_DMOUTBUFTYPE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3584
|
ERROR: TA_DMREMOTENAME not allowed for TOP END T_DM_IMPORT entries of type QNAME
|
|
Description
|
A T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMREMOTENAME attribute is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMREMOTENAME attribute from the entry and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3585
|
ERROR: TA_DMCONV not allowed for TOP END T_DM_IMPORT entries of type QNAME
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMCONV parameter is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMCONV attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3586
|
ERROR: TA_DMTE_RTQGROUP not allowed for TOP END T_DM_IMPORT entries of type QNAME
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_RTQGROUP parameter is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMTE_RTQGROUP attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3587
|
ERROR: TA_DMTE_RTQNAME not allowed for TOP END T_DM_IMPORT entries of type QNAME
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMTE_RTQNAME parameter is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMTE_RTQNAME attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3588
|
ERROR: TA_DMCODEPAGE not allowed for TOP END T_DM_IMPORT entries of type QNAME
|
|
Description
|
The T_DM_IMPORT MIB request specified an invalid Oracle TOP END attribute. The TA_DMCODEPAGE parameter is not allowed for Oracle TOP END entries of type QNAME .
|
Action
|
Remove the TA_DMCODEPAGE attribute from the MIB request and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3589
|
ERROR: TOP END T_DM_IMPORT entries must specify a TA_DMRESOURCETYPE of SERVICE, QSPACE or QNAME
|
|
Description
|
The T_DM_IMPORT MIB request did not specify a valid TA_DMTYPE attribute.
|
Action
|
Modify the MIB request to correct the TA_DMTYPE attribute value and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3590
|
ERROR: TA_DMINBUFTYPE for TOP END domains limited to FML32, CARRAY, or X_OCTET
|
|
Description
|
The T_DM_IMPORT MIB request did not specify a valid TA_DMINBUFTYPE attribute. The TOP END domain gateway only supports FML32 , CARRAY , and X_OCTET buffer types.
|
Action
|
Correct the MIB request giving a supported value to the TA_DMINBUFTYPE attribute and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3591
|
ERROR: TA_DMOUTBUFTYPE for TOP END domains limited to FML32, CARRAY, or X_OCTET
|
|
Description
|
The T_DM_IMPORT MIB request did not specify a valid TA_DMOUTBUFTYPE attribute. The TOP END domain gateway only supports FML32 , CARRAY , and X_OCTET buffer types.
|
Action
|
Correct the MIB request giving a supported value to the TA_DMOUTBUFTYPE attribute and retry the operation.
|
See Also
|
DMIB (5), dmconfig for GWTOPEND (5)
Using the Oracle TUXEDO TOP END Domain Gateway
|
3592
|
ERROR: field_name: Invalid value.
|
|
Description
|
An error was detected by the Domain Administrative server while processing a MIB request. The field field_name was found to have an invalid value.
|
Action
|
Provide a valid value for the field field_name and retry the operation.
|
See Also
|
DMIB (5)
|
3593
|
ERROR: Failed Encryption.
|
|
Description
|
Failed to encrypt the password specified. This may be due to a number of problems with the configuration files and other system files.
|
Action
|
Contact Oracle Customer Support with the exact message, after sanity checks on the Oracle TUXEDO Configuration files and Domain Configuration files.
|
|
|
3594
|
ERROR: unable to allocate FML buffer to convert MIB request to gwadm format.
|
|
Description
|
Failed to allocate memory necessary for propagating the MIB request to active GWADM server processes.
|
Action
|
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. If message persists, contact Oracle Customer Support with the exact error message.
|
|
|
3595
|
ERROR: unable to add field field_name to gwadm buffer.
|
|
Description
|
The DMADM administration server was unable to add a required field field_name to an internal buffer for propagating a MIB update to GWADM administrative servers.
|
Action
|
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. If message persists, contact Oracle Customer Support with the exact error message.
|
|
|
3596
|
ERROR: invalid operation to map to gwadm format.
|
|
Description
|
The DMADM administrative server has detected an error propagating a MIB update to GWADM adminstration servers.
|
Action
|
Contact Oracle Customer Support with the exact error message.
|
|
|
3598
|
ERROR: Cannot read REMOTE SERVICES section of bdmconfig file (file_name)
|
|
Description
|
The DMADM administration server has been unable to read the REMOTE SERVICES section of the BDMCONFIG file file_name.
|
Action
|
Make sure that the BDMCONFIG file still exists.
|
See Also
|
dmconfig (5)
|