|
|
3900
|
Cannot specify THROUGHGATEWAY without switching on bypass domain feature
|
|
|
Description
|
The dmloadcf(1) utility detected an error while processing the DMCONFIG file. The THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section can not be set to Y without enablng bypass domain feature.
|
|
Action
|
Modify the DMCONFIG file to remove THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf(1) or enable bypass domain feature.
|
|
See Also
|
dmconfig(5)
|
3901
|
ERROR: Cannot specify THROUGHGATEWAY without switching on bypass domain feature
|
|
|
Description
|
The dmloadcf(1) utility detected an error while processing the DMCONFIG file. The THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section can not be set to Y without enable bypass domain feature.
|
|
Action
|
Modify the DMCONFIG file to remove THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf(1) or enable bypass domain feature.
|
|
See Also
|
dmconfig(5)
|
3903
|
ERROR: Unknown THROUGHGATEWAY <string>. Only Y/y/N/n are allowed.
|
|
|
Description
|
The value of THROUGHGATEWAY in DM_LOCAL_DOMAINS section is not a valid value. Only Y/y/N/n is allowed.
|
|
Action
|
Modify the DMCONFIG file to specify valid value (Y/y/N/n) for THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf(1)
|
|
See Also
|
dmconfig(5)
|
3904
|
Cannot specify THROUGHGATEWAY without switching on bypass domain feature
|
|
|
Description
|
The dmloadcf(1) utility detected an error while processing the DMCONFIG file. The THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section can not be set to Y without enabling bypass domain feature.
|
|
Action
|
Modify the DMCONFIG file to remove THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf(1) or enable bypass domain feature.
|
|
See Also
|
dmconfig(5)
|
3905
|
ERROR: Cannot specify THROUGHGATEWAY without switching on bypass domain feature
|
|
|
Description
|
The dmloadcf(1) utility detected an error while processing the DMCONFIG file. The THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section can not be set to Y without enabling bypass domain feature.
|
|
Action
|
Modify the DMCONFIG file to remove THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf(1) or enable bypass domain feature.
|
|
See Also
|
dmconfig(5)
|
3907
|
ERROR: Unknown THROUGHGATEWAY <string>. Only Y/y/N/n is allowed.
|
|
|
Description
|
The value of THROUGHGATEWAY in DM_LOCAL_DOMAINS section is not a valid value. Only Y/y/N/n is allowed.
|
|
Action
|
Modify the DMCONFIG file to specify valid value (Y/y/N/n) for THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf(1)
|
|
See Also
|
dmconfig(5)
|
3913
|
ERROR: GWADM gets no access permission to BYPASSDOM_SHARED_DIR.
|
|
|
Description
|
When BYPASS DOMAIN feature is enabled, GWADM must have full access permissions (read, write and execute) to the directory specified by BYPASSDOM_SHARED_DIR.
|
|
Action
|
Change the directory access permissions to read, write and execute.
|
|
See Also
|
tmloadcf(1), UBBCONFIG(5)
|
3914
|
ERROR: No services have been resumed because none were offered by connected remote domains
|
|
|
Description
|
When the GW_RESUME_CONN_ONLY=y environment variable is set, the behavior of the dmadmin(1) resume subcommand is modified so that a service is resumed only if a connection to the remote domain offering the service is active.
The dmadmin subcommand resume -all found that none of the remote services handled by the specified local domain were offered by connected remote domains, so no services were resumed.
|
|
Action
|
The dmadmin subcommand printdomain -d local_domain_name can be used to show the status of connections from this domain.
Contact the remote domain administrators to verify that these domains are active and/or resolve any network issues that are preventing the domains from connecting.
Depending on the connection policy specified, rebooting a remote domain may or may not cause there services offered by that domain to be automatically advertised. If needed, rerun the dmadmin resume -all subcommand after remote domain connections are restored.
|
|
See Also
|
dmadmin(1)
|
3915
|
WARN: Only services offered by connected remote domains have been resumed
|
|
|
Description
|
When the GW_RESUME_CONN_ONLY=y environment variable is set, the behavior of the dmadmin(1) resume subcommand is modified so that a service is resumed only if a connection to the remote domain offering the service is active.
The dmadmin subcommand resume -all found that only some of the remote services handled by the specified local domain were offered by connected remote domains, and only those services were resumed.
|
|
Action
|
The dmadmin subcommand printdomain -d local_domain_name can be used to show the status of connections from this domain.
Contact the remote domain administrators to verify that these domains are active and/or resolve any network issues that are preventing the domains from connecting.
Depending on the connection policy specified, rebooting a remote domain may or may not cause there services offered by that domain to be automatically advertised. If needed, rerun the dmadmin resume -all subcommand after remote domain connections are restored.
|
|
See Also
|
dmadmin(1)
|
3916
|
ERROR: Service has not been resumed because domain domainname is not currently connected
|
|
|
Description
|
When the GW_RESUME_CONN_ONLY=y environment variable is set, the behavior of the dmadmin(1) resume subcommand is modified so that a service is resumed only if a connection to the remote domain offering the service is active.
The dmadmin subcommand resume subcommand found that the specified service was not associated with a connected remote domain, so the service was not resumed.
|
|
Action
|
The dmadmin subcommand printdomain -d local_domain_name can be used to show the status of connections from this domain.
Contact the remote domain administrators to verify that these domains are active and/or resolve any network issues that are preventing the domains from connecting.
Depending on the connection policy specified, rebooting a remote domain may or may not cause there services offered by that domain to be automatically advertised. If needed, rerun the dmadmin resume subcommand after remote domain connections are restored.
|
|
See Also
|
dmadmin(1)
|
3917
|
WARN: Can't create statistics file statistics_file_name to log statistics records
|
|
|
Description
|
When turn on domain statistics trace log, the statistics file cannot created.
The GWADM found that the specified statistics file can not be created with a curently file name.
|
|
Action
|
The GWADM dose not write the statistics trace log from this domain.
|
|
See Also
|
GWADM
|
3918
|
WARN: Can't write to statistics file statistics_file_name
|
|
|
Description
|
When turn on domain statistics trace log, can not write the the statistics trace log to the statistics file.
The GWADM found that the can not write the statistics trace log specified statistics file.
|
|
Action
|
The GWADM dose not write the statistics trace log from this domain.
|
|
See Also
|
GWADM
|
3919
|
ERROR: Unknown TLSversion tls_version. Only TLSv1.2/TLSv1.1/TLSv1.0 are allowed
|
|
|
Description
|
Tuxedo only support TLS version 1.2, 1.1 and 1.0 now. any other version not allowed.
|
|
Action
|
The GWTDOMAIN supported TLS version 1.2, 1.1 and 1.0 in Tuxedo where network communication happened. any other TLS version not allowed, and GWTDOMAIN will close the network communication.
|
|
See Also
|
GWTDOMAIN
|
3920
|
ERROR: STATISTICSLOG_PFX must start with an absolute pathname
|
|
|
Description
|
The value of STATISTICSLOG_PFX must be an absolute pathname.
|
|
Action
|
The problem may be that of a missing file, or incorrect permissions to the file or to a directory in the pathname of the file. Correct the problem.
|
|
See Also
|
dmconfig(5)
|
3921
|
statsvc (statsvc) -d local_domain_access_point_name -t interval_time_number
|
|
|
Description
|
The dmadmin(1) statsvc subcommand is modified the interval number of domain statistics trace log.
|
|
Action
|
The dmadmin subcommand statsvc -d local_domain_access_point_name -t interval_time_number can be used to modify the interval of write the statistics log to statistics log file.
|
|
See Also
|
dmadmin(1)
|
3922
|
Activates (on) or deactivates (off) the statistics audit trace for the named local domain access point with remote service call.
|
|
|
Description
|
The STATISTICS_INTERVAL is set by the dmadmin(1) statsvc subcommand. When the value of STATISTICS_INTERVAL is large than 0, activates (on) the statistics audit trace for the named local domain access point with remote service call. otherwise deactivates (off) it.
|
|
Action
|
Activates (on) the statistics audit trace for the named local domain access point with remote service call. The GWADM will write the statistics audit trace log to the STATISTICSLOG_PFX file. otherwise deactivates (off) it.
|
|
See Also
|
3921
|
3923
|
Statistics started with interval is %d seconds.
|
|
|
Description
|
The STATISTICS_INTERVAL is set by the dmadmin(1) statsvc subcommand. When the value of STATISTICS_INTERVAL is large than 0, the GWADM will start to write the statisctics trace log to STATISTICSLOG_PFX with seconds.
|
|
Action
|
The dmadmin subcommand statsvc can be used to modify the interval of write the statistics audit trace log from this domain.
|
|
See Also
|
dmadmin(1)
|
3924
|
ERROR: The new STATISTICS_INTERVAL is not within the range of %d-%d
|
|
|
Description
|
The STATISTICS_INTERVAL is set by the dmadmin(1) statsvc subcommand. the range of STATISTICS_INTERVAL is large than or equal to 0, and less than 32767 second.
|
|
Action
|
The STATISTICS_INTERVAL should be in the range:0-32767
|
|
See Also
|
dmadmin(1)
|
