System Messages: LIBORB Catalog 0-99
|
![]() |
![]() |
1 |
INFO: Successful completion. | |
|
Description |
The operation was completed successfully. Exception None. |
Action |
None. | |
2 |
ERROR: Operation failed. | |
|
Description |
The operation failed.
Exception |
Action |
A serious error has occurred that probably involves a programming function that is being performed. For additional information about the failure, refer to additional system messages, if provided. | |
3 |
FATAL: Fatal error detected. | |
|
Description |
A fatal error was detected. Processing stops.
Exception |
Action |
A serious error has occurred that probably involves a programming function that is being performed. For additional information about the failure, refer to additional system messages, if provided. | |
4 |
ERROR: Item not found. | |
|
Description |
The specified item was not found. This message is commonly used by the WLE list routines.
Exception |
Action |
For additional information about the failure, refer to additional system messages, if provided. If the information is insufficient and you are unable to resolve the problem, contact Oracle Customer Support. | |
5 |
ERROR: Bad list. | |
|
Description |
Attempted to use a WLE list with a WLE list routine when the list was not created by a WLE list routine.
Exception |
Action |
None. | |
6 |
ERROR: Index out of range. | |
|
Description |
The specified index into a list is out of range; that is, it exceeds the list's boundaries.
Exception |
Action |
Verify the size of the list and the specified index. | |
7 |
FATAL: Insufficient memory. | |
|
Description |
There was not an adequate amount of virtual memory to complete the operation.
Exception |
Action |
Verify memory usage or adjust process quotas and system configuration. | |
8 |
ERROR: Could not find file `Filename'. | |
|
Description |
The specified file could not be found.
Exception |
Action |
Verify the file name. | |
9 |
ERROR: Insufficient privilege to access file `Filename'. | |
|
Description |
The user lacks sufficient privileges to access the file.
Exception |
Action |
Verify the file privileges and the file specification. | |
10 |
ERROR: File `Filename' not available. | |
|
Description |
The specified file is not available (for example, the disk is unavailable or the network is unavailable).
Exception |
Action |
Verify the availability of the file. | |
11 |
ERROR: Bad file specification `Filename'. | |
|
Description |
The file specification is invalid (for example, too many characters, invalid characters, invalid form, and so on).
Exception |
Action |
Verify the file name. | |
12 |
ERROR: Buffer too small. | |
|
Description |
The buffer specified for a routine argument is too small to contain the result.
Exception |
Action |
Enlarge the buffer. | |
13 |
ERROR: Could not create file `Filename'. | |
|
Description |
The specified file could not be created. This problem could be caused by an invalid file specification, the existence of a file with the same file name (cannot overwrite), the unavailability of the specified disk or network, and so on.
Exception |
Action |
Verify the file name and the output device. | |
14 |
ERROR: Unrecognized status `status' attempting to get a message. | |
|
Description |
The specified message could not be retrieved and an unrecognized status value was returned.
Exception |
Action |
Contact Oracle Customer Support. | |
15 |
ERROR: An internal error has occurred. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
16 |
ERROR: Parameter `val' is not of type CORBA_STRING. | |
|
Description |
The parameter `val' was expected to be a string, but it was not.
Exception |
Action |
There are two situations where this error can occur. In the first, an error message expected a string value, but did not receive one. In the second, a server was attempting to return the result of a request, but the required typecode was incorrect. In both cases, contact Oracle Customer Support. | |
17 |
ERROR: A typecode internal error has occurred. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
18 |
ERROR: No buffer specified. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
19 |
ERROR: Unknown environment variable. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
20 |
ERROR: Bad type specified for list. | |
|
Description |
An invalid list type was specified when a list was created or accessed.
Exception |
Action |
Verify that the list and the list type specification are one of the WLE product supported lists. | |
21 |
ERROR: Expected list type does not match actual list type. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
22 |
ERROR: Invalid list operation. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
23 |
ERROR: List element already exists. | |
|
Description |
A list element corresponding to an element being added already exists.
Exception |
Action |
Verify the list and the element to be inserted. | |
24 |
ERROR: Count specified for list is invalid. | |
|
Description |
The count specified for the list is invalid. The list count specified is not the actual list count.
Exception |
Action |
Verify the list and the list count. | |
25 |
ERROR: Invalid data type specified. | |
|
Description |
The value specified does not conform to the specified data type.
Exception |
Action |
Correct the data type or value specified. | |
26 |
ERROR: Insufficient privilege to perform operation. | |
|
Description |
The user lacks sufficient privileges to perform the requested operation.
Exception |
Action |
Verify the user's privileges for the requested operation. | |
27 |
ERROR: List is static; cannot be extended. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
29 |
ERROR: The endpoint is not a local endpoint | |
|
Description |
An application is using an object reference it expects to be implemented within its own process, but the reference is for an implementation outside of the process.
Exception |
Action |
Contact Oracle Customer Support. | |
32 |
ERROR: Bad UUID `val'. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
33 |
ERROR: Dynamic load of component `ComponentName' for subsystem `Name' failed. | |
|
Description |
The specified component of the subsystem could not be dynamically loaded.
Exception |
Action |
Verify that the installation succeeded and that the subsystem file exists. | |
34 |
ERROR: Could not open file `Filename'. | |
|
Description |
The specified file could not be opened.
Exception |
Action |
Verify the file name. | |
35 |
ERROR: Could not read file `Filename'. | |
|
Description |
The specified file could not be read.
Exception |
Action |
Verify the file name and the protection. | |
36 |
ERROR: The file `Filename' is locked. | |
|
Description |
The specified file is currently locked.
Exception |
Action |
Specify an alternate file, or attempt to access the file later. | |
37 |
ERROR: Invalid operation. | |
|
Description |
An invalid or illegal operation was attempted.
Exception |
Action |
Verify the operation. | |
38 |
ERROR: Bad object for operation. | |
|
Description |
An invalid object was specified for the operation.
Exception |
Action |
Verify that the correct object is being used for the operation. | |
39 |
ERROR: Invalid parameter for operation. | |
|
Description |
An invalid parameter was specified for the operation.
Exception |
Action |
Verify that the proper parameter was specified for the operation. | |
40 |
ERROR: Bad Security Identifier. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
41 |
ERROR: Not yet implemented. | |
|
Description |
The specified feature is not yet implemented.
Exception |
Action |
None | |
42 |
ERROR: unknown error: `ErrorText'. | |
|
Description |
The error text corresponding to the unknown error.
Exception |
Action |
Determine the appropriate action from the error text. | |
43 |
ERROR: Bad Repository Id `RepID'. | |
|
Description |
An invalid repository identifier was specified.
Exception |
Action |
Supply a valid repository identifier. | |
44 |
ERROR: GIOP Locate Forwarding loop detected. | |
|
Description |
While attempting to locate an ORB to which to send a given invoke request, a forwarding loop was detected.
Exception |
Action |
Contact the system manager for the remote ORB to which you are trying to communicate and report that there is a forwarding loop between multiple servers (that is, each server is forwarding requests to the other). | |
45 |
ERROR: There is no support for this function. | |
|
Description |
The operation attempted is not supported on this platform.
Exception |
Action |
Review the product documentation to ensure the feature is available on this platform. | |
46 |
ERROR: No Current implementation was found. | |
|
Description |
No current implementation was found for the operation.
Exception |
Action |
None. | |
47 |
ERROR: The endpoint is a local endpoint | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
48 |
ERROR: Current type was already registered. | |
|
Description |
A Current for this type has already been registered.
Exception |
Action |
None. | |
49 |
ERROR: MessageErrorMessage received | |
|
Description |
A GIOP
Exception |
Action |
Check that the client and server support compatible GIOP versions. | |
50 |
ERROR: Could not find the entry point `EntryPoint' in the dynamically loaded library `Name'. | |
|
Description |
The given shared library does not contain the given entry point name.
Exception |
Action |
Verify that the installation was successful. | |
51 |
WARN: One or more unsupported kinds were encountered. | |
|
Description |
Not all TCKinds are currently supported.
Exception |
Action |
Check the client for the use of unsupported kinds. | |
52 |
WARN: A UserException can not be thrown from this function. | |
|
Description |
Exception |
Action |
Check the function to see whether a user exception was incorrectly thrown. | |
53 |
ERROR: An error was detected in the configuration settings. | |
|
Description |
Invalid configuration settings were detected during initialization.
Exception |
Action |
Determine whether the configuration settings passed to | |
55 |
ERROR: Specified object `ObjectName' already exists. | |
|
Description |
The specified object already exists in the repository.
Exception |
Action |
None. | |
56 |
ERROR: Repository error in `Filename'. | |
|
Description |
An error occurred in the repository.
Exception |
Action |
For additional information about the failure, refer to additional system messages, if provided. If the information is insufficient and you are unable to resolve the problem, contact Oracle Customer Support. | |
57 |
ERROR: Illegal database operation for attribute `val'. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
58 |
ERROR: Attribute `AttributeName' already exists. | |
|
Description |
The user attempted to redefine an attribute that already exists.
Exception |
Action |
Verify the attribute specified and the object. | |
59 |
ERROR: Bad object name `ObjectName'. | |
|
Description |
The specified object name is an invalid WLE object name (for example, illegal characters, too many characters, bad format, and so on).
Exception |
Action |
Verify the name. | |
60 |
ERROR: Bad type `ObjectType' for object `ObjectName'. | |
|
Description |
The specified object type is not one of the supported object types. Alternatively, the object may be of an incorrect type for the operation.
Exception |
Action |
Verify the type. | |
61 |
ERROR: Bad object identifier. | |
|
Description |
An error occurred while reading the registry or a repository. |
Action |
The registry or repository may be corrupted. You can reload the repository from your idl to correct the error. If this does not correct the problem, contact Oracle Customer Support. | |
62 |
ERROR: Object `Objectname' not found. | |
|
Description |
The specified object was not found.
Exception |
Action |
Verify the object name, whether the object exists, and that the correct repository was specified. | |
63 |
ERROR: No attributes found. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
64 |
ERROR: Attribute `AttributeName' not found. | |
|
Description |
The specified attribute was not found.
Exception |
Action |
Verify attribute and object names, and that the correct repository was specified. | |
65 |
ERROR: Value not found. | |
|
Description |
The specified value was not found.
Exception |
Action |
Verify the value specification and object names and that the correct repository was specified. | |
66 |
ERROR: File error for repository `Filename'. | |
|
Description |
A file error occurred for the specified repository.
Exception |
Action |
Verify the file name and the file. | |
67 |
ERROR: The repository `Filename' is locked. | |
|
Description |
The specified repository is locked due to a write operation.
Exception |
Action |
Exit the application that has the repository opened for write. | |
68 |
ERROR: Repository `Filename' not found. | |
|
Description |
The specified repository was not found.
Exception |
Action |
Verify the file specification and that the repository exists. | |
69 |
ERROR: No repository specified. | |
|
Description |
The user attempted an operation on a repository (for example, open) without specifying the file name of the repository.
Exception |
Action |
Specify a repository file specification. | |
70 |
ERROR: Repository `val' opened in wrong mode. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
71 |
ERROR: Repository `Filename' is full. | |
|
Description |
The specified repository is full. No new definitions may be stored.
Exception |
Action |
Remove unnecessary object definitions or use another repository. | |
72 |
ERROR: Object is referenced by other objects. | |
|
Description |
For a delete object operation, the object is referenced by other objects and may not be deleted.
Exception |
Action |
Remove the references, if possible. | |
73 |
ERROR: Bad repository handle. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
74 |
ERROR: Bad database operation. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
75 |
ERROR: Bad database version. | |
|
Description |
A repository created using an old version of WLE software was specified on an open repository operation.
Exception |
Action |
Re-create the database using the latest WLE software version. | |
76 |
ERROR: No privilege for attempted operation on repository `Filename'. | |
|
Description |
The user attempted a database operation that he or she is not privileged to do.
Exception |
Action |
Obtain the proper privilege to perform the operation. | |
77 |
ERROR: Database operation on repository `Filename' timed out. | |
|
Description |
The attempted database operation timed out.
Exception |
Action |
Try the operation again. | |
78 |
ERROR: File `Filename' is not a valid ORB configuration file. | |
|
Description |
The WLE software attempted to open a database file and the database tag did not match. The specified database was not created by the WLE product.
Exception |
Action |
Make sure the file is a valid WLE database file. | |
79 |
ERROR: An internal error has occurred. | |
|
Description |
An unrecoverable internal processing error has occurred.
Exception |
Action |
Contact Oracle Customer Support. | |
80 |
ERROR: File error: `ErrorText'. | |
|
Description |
The error text corresponding to the file error.
Exception |
Action |
Determine the appropriate action from the error text. | |
81 |
ERROR: Invalid Object Reference. | |
|
Description |
The specified repository object reference was not one of the supported types. Alternatively, the types specified may be incorrect for the operation being performed.
Exception |
Action |
Verify the object reference. | |
82 |
ERROR: Invalid Override. | |
|
Description |
An attempt has been made to override the operation or attribute definition, but the name conflicts with an existing object.
Exception |
Action |
Identify the name with which the operation or attribute conflicts, and change one of the two names to eliminate the conflict. | |
83 |
ERROR: Container ObjectName Is Inherited By InheritedBy. | |
|
Description |
A container could not be deleted because it is inherited by another container.
Exception |
Action |
None. | |
84 |
ERROR: ObjectName Not Deleted. | |
|
Description |
A object could not be deleted. See secondary messages for specific reason.
Exception |
Action |
None. | |
85 |
ERROR: Repository Corrupted. | |
|
Description |
An object within the repository has been corrupted.
Exception |
Action |
Re-create the repository or recover from a previous version. | |
86 |
ERROR: Bad Repository Id `RepID'. | |
|
Description |
An invalid repository identifier was specified.
Exception |
Action |
Specify a valid repository identifier. | |
87 |
ERROR: Invalid Container `ObjectName'. | |
|
Description |
An attempt was made to create an object inside a container and the container type is not valid for this type of object.
Exception |
Action |
Specify a valid container. | |
88 |
ERROR: Base Object val Not Found. | |
|
Description |
When loading a repository, the base object of an inheritance 'val' was not found.
Exception |
Action |
Load the idl containing the base object definition into the repository. | |
89 |
ERROR: Bad Type InternalType. | |
|
Description |
The object reference is invalid or corrupted.
Exception |
Action |
Re-create the repository or recover from a previous version. | |
90 |
ERROR: Invalid Limit Type ObjectName. | |
|
Description |
The limit type specified is not valid or is not valid in the context within which it is being used.
Exception |
Action |
Specify a valid limit type value. | |
91 |
ERROR: Specified Attribute Value Not Found For Attribute `val'. | |
|
Description |
The attribute value of attribute `val' was not found during a delete operation.
Exception |
Action |
Reload the repository or registry. | |
92 |
ERROR: Invalid constant value. | |
|
Description |
The user attempted to create a constant and the type of the value provided was not a string or the value of the string was NULL.
Exception |
Action |
Verify the type and value of the constant. | |
93 |
ERROR: Bad Result Type. | |
|
Description |
The type of the result for the operation is invalid.
Exception |
Action |
Verify the type. | |
94 |
ERROR: Bad Attribute Type. | |
|
Description |
The type of the attribute is invalid.
Exception |
Action |
Verify the type. | |
95 |
ERROR: Bad TypeDef Type. | |
|
Description |
The type of the typedef is invalid.
Exception |
Action |
Verify the type. | |
96 |
ERROR: Bad Constant Type. | |
|
Description |
The type of the constant is invalid.
Exception |
Action |
Verify the type. | |
97 |
ERROR: Bad Exception Type. | |
|
Description |
The type of the exception is invalid.
Exception |
Action |
Verify the type. | |
98 |
ERROR: Invalid TypeCode Id RepID. | |
|
Description |
The typecode points to an invalid typedef.
Exception |
Action |
Verify the type. | |
99 |
ERROR: Signature ObjectName Not Fetched. | |
|
Description |
The signature for a method could not be fetched because an error occurred while the specified operation was being fetched.
Exception |
Action |
Verify the type. |
![]() |
![]() |
![]() |