System Messages: LIBTG Catalog 1000-1099
|
![]() |
![]() |
1000 |
ERROR: config file <val> not found | |
|
Description |
The Oracle TUXEDO/Oracle TOP END gateway configuration file was not found. (This file is specified
with the |
Action |
Create a configuration file (if one does not exist) and set the | |
1001 |
WARN: unknown section <val> in val - skipping | |
|
Description |
Valid sections for the gateway configuration file are:
|
Action |
The system ignores the line containing the name of the invalid section. If this behavior is acceptable, then no action is required. (Even if it is acceptable for this line to be ignored, however, it is a good idea to delete it to maintain a clean file.) If the name is invalid because of a spelling or typing error, then correct the error. | |
1002 |
ERROR: service name <val> too long, max val characters | |
|
Description |
The service name specified in the service definition file (as specified by the |
Action |
Modify the service names in the configuration file and re-boot the gateway. | |
1003 |
ERROR: syntax error in configuration file: <val> | |
|
Description |
A syntax error was detected in the service definition file specified by the |
Action |
Fix the indicated line and re-boot the gateway. | |
1004 |
ERROR: product name <val> too long, max val characters | |
|
Description |
The product name specified in the service definition file (as specified by the |
Action |
Modify the product names in the configuration file and re-boot the gateway. | |
1005 |
ERROR: function name <val> too long, max val characters | |
|
Description |
The function name specified in the service definition file (as specified by the |
Action |
Modify the function names in the configuration file and re-boot the gateway. | |
1006 |
ERROR: target name <val> too long, max val characters | |
|
Description |
The target name specified in the service definition file (as specified by the |
Action |
Modify the target names in the configuration file and re-boot the gateway. | |
1007 |
ERROR: unknown tag <val> in val | |
|
Description |
An unknown tag was found in the service definition file specified by the |
Action |
Correct the configuration file and re-boot the gateway. | |
1008 |
ERROR: exceeded number of entries (val) supported by gateway | |
|
Description |
The service definition file (specified by the |
Action |
Ei ther remove service entries from the configuration file, or configure a second gateway (with a second configuration file) and segment the services. | |
1009 |
ERROR: service <val> does not have PRODUCT defined in file val | |
|
Description |
|
Action |
Add product names as appropriate and re-boot the gateway. | |
1010 |
ERROR: multiple product names not allowed in TE_LOCAL_SERVICES section | |
|
Description |
The |
Action |
Modify the file so that all product names in the | |
1011 |
WARN: Unable to establish connection to TOP END | |
|
Description |
Th egateway was unable to connect to the Oracle TOP END system. The gateway needs to connect to a Oracle TOP END Network Agent. |
Action |
Make sure that the Oracle TOP END Network Agent (NA) is running and configured properly. Also make
sure that the Oracle TOP END remote configuration file (as specified by the | |
1012 |
ERROR: Cannot allocate TOP END client DIF structure | |
|
Description |
The gateway was unable to allocate the memory needed for Oracle TOP END communication. The
gateway will retry the allocation as specified by the |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1013 |
ERROR: Sign on to TOP END failed. Error code=val(val). server exiting... | |
|
Description |
The |
Action |
Check the description of the error code available in the | |
1014 |
ERROR: username and password (-u and -p) invalid or not specified | |
|
Description |
The |
Action |
Modify the user name or password (using the | |
1015 |
ERROR: failed on TOP END receive during initialization. Error code=val(val) | |
|
Description |
The |
Action |
Check the description of the error code available in the | |
1016 |
ERROR: failed on TOP END send. retcode=val(val) extended status=val(val) | |
|
Description |
The |
Action |
Check the description of the error code available in the | |
1017 |
ERROR: failed on TOP END receive. retcode=val(val) extended status=val | |
|
Description |
The |
Action |
Check the description of the error code available in the | |
1018 |
WARN: TOP END server sent response with TP_APPL_CONTEXT. Resetting dialog | |
|
Description |
The Oracle TOP END server set the |
Action |
The | |
1019 |
INFO: stale response message received from TOP END - ignoring | |
|
Description |
The response that was received is apparently an orphaned response. This problem can occur when the gateway goes down and restarts. The gateway continues to search for the matching response. |
Action |
No action is required. | |
1020 |
ERROR: TOP END initialization Failed. Error code=val(val) | |
|
Description |
The |
Action |
Check the description of the error code available in the | |
1021 |
ERROR: service definition file (-f )not specified. Exiting server... | |
|
Description |
The |
Action |
Add the | |
1022 |
ERROR: cannot access MIB for security info. val. Exiting server... | |
|
Description |
The |
Action |
Verify that the | |
1023 |
ERROR: cannot access MIB for security info. val. Exiting server... | |
|
Description |
The |
Action |
Verify that the | |
1024 |
ERROR: unable to allocate TOP END receive buffer. Exiting server... | |
|
Description |
The gateway was unable to allocate the memory needed for Oracle TOP END communication. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1026 |
ERROR: TOP END tp_csi_alloc Failed. Exiting server... | |
|
Description |
The gateway was unable to allocate the memory needed for Oracle TOP END communication. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1027 |
ERROR: function name not found | |
|
Description |
The |
Action |
Check the service definition file to verify the function names. | |
1028 |
ERROR: failed to convert message to TUXEDO format | |
|
Description |
The gateway was unable to convert the Oracle TOP END client request into the Oracle TUXEDO buffer format. |
Action |
Check the message in the userlog preceding this message for fur ther information. Possible symptoms are: message too large (max 30K), unsupported Oracle TUXEDO buffer type. | |
1029 |
ERROR: failure attempting to reach service name (name) | |
|
Description |
The |
Action |
Probable causes are: the service is not advertised or is suspended, or the service name advertised
by the Oracle TUXEDO system (as specified in the | |
1030 |
ERROR: failure attempting to get reply from service name (name) | |
|
Description |
The |
Action |
Check the error value in | |
1031 |
ERROR: failed to convert message to TOP END format | |
|
Description |
The gateway was unable to convert the Oracle TUXEDO server response into the Oracle TOP END buffer format. |
Action |
Check the message in the userlog preceding this message for fur ther information. Possible symptoms are: message too large (max 30K), unsupported Oracle TUXEDO buffer type. | |
1032 |
ERROR: tp_server_send failed with unknown TOP END code[name] | |
|
Description |
The gateway received an unknown receive code from the |
Action |
No action is required. | |
1033 |
ERROR: tp_server_send failed with unknown TOP END code[name] | |
|
Description |
The gateway received an unknown receive code from the |
Action |
No action is required. | |
1034 |
ERROR: Conversational services not supported by gateway | |
|
Description |
The gateway does not support conversation services ( |
Action |
BEATUXEDO clients and servers should be built to use the request/response paradigm. | |
1035 |
ERROR: transactions not supported by gateway | |
|
Description |
The gateway does not support transactions ( |
Action |
The client call to the Oracle TOP END service should include the | |
1037 |
ERROR: Tuxedo->TopEnd service mapping not found for service name | |
|
Description |
The name of the Oracle TUXEDO service specified in the error message is not included in the table
for the |
Action |
Check the service definition file for the gateway to see if it includes an entry for the service name. | |
1038 |
ERROR: invalid value specified for wait time (-w), Server exiting... | |
|
Description |
The wait time must be greater than or equal to 0. |
Action |
Modify the wait time to a valid value. | |
1039 |
ERROR: can't open password file <name>, fopen errno=val. Server exiting | |
|
Description |
The password file (specified by the |
Action |
Ensurethat the file exists and is readable by the Oracle TUXEDO administrator. | |
1040 |
ERROR: service definition file (-f )not specified. Server exiting... | |
|
Description |
The |
Action |
Add the | |
1041 |
ERROR: Config file (-f ) not specified, server exiting | |
|
Description |
The |
Action |
Add the | |
1042 |
ERROR: unable to allocate TOP END receive buffer | |
|
Description |
The gateway was unable to allocate the memory needed for Oracle TOP END communication. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1043 |
INFO: retrying connection to TOP END every val seconds | |
|
Description |
The gateway was unable to connect to Oracle TOP END; it will perform periodic retries. The gateway will not advertise remote services until a connection is established. |
Action |
No action is required. | |
1044 |
INFO: connection established to TOP END | |
|
Description |
The gateway has successfully connected to Oracle TOP END. |
Action |
No action is required. | |
1045 |
WARN: Network connection closed by TOP END | |
|
Description |
The network connection has been closed for one of the following reasons: the Oracle TOP END system was shut down, the NA was shut down, or the network connection was broken. |
Action |
If you have planned this downtime, no action is required. If you have not planned this downtime, check the Oracle TOP END system and bring it up if necessary. Also check network connectivity. | |
1046 |
WARN: Network connection closed by TOP END | |
|
Description |
The network connection has been closed for one of the following reasons: the Oracle TOP END system was shut down, the NA was shut down, or the network connection was broken. |
Action |
If you have planned this downtime, no action is required. If you have not planned this downtime, check the Oracle TOP END system and bring it up if necessary. Also check network connectivity. | |
1047 |
WARN: Network connection closed by TOP END | |
|
Description |
The network connection has been closed for one of the following reasons: the Oracle TOP END system was shut down, the NA was shut down, or the network connection was broken. |
Action |
If you have planned this downtime, no action is required. If you have not planned this downtime, check the Oracle TOP END system and bring it up if necessary. Also check network connectivity. | |
1048 |
WARN: Network connection closed by TOP END | |
|
Description |
The network connection has been closed for one of the following reasons: the Oracle TOP END system was shut down, the NA was shut down, or the network connection was broken. |
Action |
If you have planned this downtime, no action is required. If you have not planned this downtime, check the Oracle TOP END system and bring it up if necessary. Also check network connectivity. | |
1049 |
ERROR: function <val: default from service> too long, max val chars | |
|
Description |
The Oracle TOP END function name defaults to the Oracle TUXEDO service name. The number of characters in the Oracle TUXEDO service name does not exceed the number allowed for service names, but it does exceed the number of characters allowed for function names. |
Action |
Adda function name that contains no more than eight characters to the service definition file and re-boot the gateway. | |
1050 |
WARN: unable to connect to TOP END system and retry option is disabled. Exiting server... | |
|
Description |
The |
Action |
No action is required. | |
1051 |
WARN: unsupported command-line option val | |
|
Description |
The option specified in the |
Action |
No action is required. | |
1052 |
ERROR: call to tgAllocTuxedoBuffer failed | |
|
Description |
The gateway was unable to allocate the memory needed for Oracle TUXEDO communication. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1053 |
ERROR: call to tgConvertMessage failed TUX2TE incoming | |
|
Description |
The gateway was unable to convert the Oracle TUXEDO client request into the Oracle TOP END buffer format. |
Action |
Check the message in the userlog preceding this message for fur ther information. Possible symptoms are: message too large (max 30K), unsupported Oracle TUXEDO buffer type. | |
1054 |
ERROR: call to tgConvertMessage failed TUX2TE outgoing | |
|
Description |
The gateway was unable to convert the Oracle TOP END server response into the Oracle TUXEDO buffer format. |
Action |
Check the message in the userlog preceding this message for fur ther information. Possible symptoms are: message too large (max 30K), unsupported Oracle TUXEDO buffer type. | |
1055 |
ERROR: no service mappings defined in file name | |
|
Description |
Noentries for the gateway are included in the service definition file. For the |
Action |
Add service entries for the gateway. | |
1056 |
INFO: TOP END admin message: name | |
|
Description |
A Oracle TOP END administrative message was sent to the gateway. |
Action |
No action is required. | |
1057 |
WARN: error while processing TOP END admin message [name,name] | |
|
Description |
A Oracle TOP END administrative message was sent to the gateway and an error occurred in the |
Action |
No action is required. | |
1058 |
ERROR: tp_server_send failed [name,name], ext_status=[name,name] | |
|
Description |
The |
Action |
Check the description of the error code available in the |
![]() |
![]() |
![]() |