Go to main content

Oracle® Exadata Storage Server X7-2 EF and HC Service Manual

Exit Print View

Updated: February 2019
 
 

Power Down the Server for Immediate Shutdown Using the On/Standby Button


Caution

Caution  -  When you power down the server using Oracle ILOM, the server enters Standby power mode. Power is still directed to the service processor remote management subsystem and power supply fans. To completely power off the server, you must disconnect the power cords from the power supplies.


  1. Press and hold the On/Standby button for four seconds to force the Main power off and to enter Standby power mode.

    When Main power is off, the System OK LED on the front panel begins blinking, indicating that the server is in Standby power mode. See Server System-Level Status Indicators.

  2. Disconnect the power cords and data cables from the server.

    See Disconnect Cables From the Server.


    Caution

    Caution  -  When you power down the server using the On/Standby button, the server enters Standby power mode. Power is still directed to the service processor remote management subsystem and power supply fans. To completely power off the server, you must disconnect the power cords from the power supplies.


Related Information