1 Preface

Audience

This document is intended for those who will be setting up, installing, and operating Oracle MICROS Workstation 625/655 workstations. It is not specific to a particular software application.

Admonitions

Unless specified, the information in this document applies to each configuration of the Workstation 6 Series.

The following symbols may appear in this document:


This figure shows a yellow triangle containing an exclamation point.

Caution: There is a risk of personal injury and equipment damage. Follow the instructions.

  

This figure shows a yellow triangle containing wavy vertical lines (hot surface symbol).

Caution: Hot surface. Avoid contact. Surfaces are hot and may cause personal injury if touched.

  

This figure shows a yellow triangle containing a zigzag downward arrow (high voltage symbol).

Caution: Hazardous voltages are present. To reduce the risk of electric shock and danger to personal health, follow the instructions.

  

Depending on the type of power switch your device has, one of the following symbols may be used:


This figure shows a black vertical line.

On: Applies AC power to the system.

  

This figure shows a black hollow circle.

Off: Removes AC power from the system.

  

This figure shows a black circle with a vertical line in the top area.

On: The On/Standby switch is in the standby position.

  

Customer Support

To contact Oracle Customer Support, access My Oracle Support at the following URL: https://support.oracle.com.

When contacting Customer Support, please provide the following:

  • Product version and program/module name

  • Functional and technical description of the problem (include business impact)

  • Detailed step-by-step instructions to recreate

  • Exact error message received

  • Screenshots of each step you take

Documentation

Oracle Food and Beverage product documentation is available on the Oracle Help Center at http://docs.oracle.com/en/industries/food-beverage/.

Revision History

Date Description of Change

March 2020

  • Initial publication.

April 2020

  • Image updates.

May 2020

  • Updated dimensions information.

February 2021

  • Added technical specifications tables for 625X and 625E.

October 2021

  • Updated technical specifications table.

March 2022

  • Corrected image showing recovery button location.

September 2022

  • Added information about connecting the 10-Inch Customer Display the Workstation 625/655.

August 2023

October 2023

  • Added how to connect the 7–Inch High Mount Customer Facing Display to the Workstation 625/655.

February 2024

  • Added how to set up an Epson serial printer that prints to IDN COM 4.