Description
Metric table
The metric table can include some or all of the following: target version, default collection frequency, default warning threshold, default critical threshold, and alert text.
The metrics in this category provide information about the network interfaces bandwidth.
This metric provides the percentage of output errors on the interface.
|
This metric provides the average input operations over 10 minutes.
|
This metric provides the percentage of input/output errors.
|
This metric provide the percentage of input errors on the interface.
|
This metric provides the average input operations over 10 minutes.
|
This metric provides the amount of bandwidth used since the last collection.
|
This metric provides the average percentage of activity over 10 minutes.
|
This metric provides the average input/output operations over 10 minutes.
|
This metric provides the total network collisions (in percentage) of the network interface since the last collection.
|
The metrics in this category provide information about the Network Datalinks performance.
This metric provides the link state.
|
This metric provides the number of outbound packets.
|
This metric provides the number of outbound octets.
|
This metric provides the average of the outbound octet rate for this interface.
|
This metric provides the number of outbound multicasts.
|
This metric provides the number of outbound multicast octets.
|
This metric provides the number of outbound errors.
|
This metric provides the number of outbound drops since the last collection.
|
This metric provides the number of outbound dropped octets.
|
This metric provides the number of outbound broadcasts.
|
This metric provides the number of outbound broadcast octets.
|
This metric provides the number of inbound packets.
|
This metric provides the number of inbound octets.
|
This metric provides the number of inbound multicasts.
|
This metric provides the number of inbound multicast octets.
|
This metric provides the number of inbound errors.
|
This metric provides the number of inbound drops.
|
This metric provides the number of inbound dropped octets.
|
This metric provides the number of inbound broadcasts.
|
This metric provides the number of inbound broadcast octets.
|
This metric provides the number of collisions.
|
The metrics in this category provide information about the component state.
The metric provides information about errors.
|
This metric provides the state of the component.
|
This metric category provides information about the status of the Systems Infrastructure PDU target.
The metrics in this category provide information about the status of the Power Distribution Unit (PDU) module.
This metric provides the number of the PDU module.
|
This metric provides the Out of Balance threshold for the measured current.
|
This metric provides the Out of Balance threshold for the measured current
|
The metrics in this category provide information about the phase status of the Power Distribution Unit (PDU) module.
This metric provides the phase number of the PDU module.
|
This metric provides the number of the PDU module.
|
This metric provides the phase hardware threshold for the measured current.
|
This metric provides the amount of current consumed (in amperes) by the PDU module.
|
This metrics in this category provide information about the network ports performance.
This metric provides the vLAN ID.
|
This metric provides the rate of total octet bits.
|
This metric provides the measurement units for the speed.
|
This metric provides the speed of the link.
|
This metric provides the defined partition keys.
|
This metric provides the number of outbound unicast packets.
|
This metric provides the average of the outbound octet rate for this interface.
|
This metric provides the number of outbound octets.
|
This metric provides the number of outbound multicast packets.
|
This metric provides the number of outbound errors.
|
This metric provides the number of outbound discards.
|
This metric provides the operational status of the port.
|
This metric provides the specific duplex mode of the port.
|
This metric provides the Maximum Transmission Unit (MTU) of the link.
|
This metric provides the number of inbound packets with an unknown protocol.
|
This metric provides the number of inbound unicast packets.
|
This metric provides the average of the inbound octet rate for this interface.
|
This metric provides the number of inbound octets.
|
This metric provides the number of inbound multicast packets.
|
This metric provides the number of inbound errors.
|
This metric provides the information about the number of discarded packets.
|
The metrics in this category provide information about the network interfaces performance.
This metric provides the status of the network interface.
|
This metric provides the link state.
|
This metric provides the number of outbound packets.
|
This metric provides the number of outbound overruns since the last collection.
|
This metric provides the average of the outbound octet rate for this interface.
|
This metric provides the number of outbound octets.
|
This metric provides the number of outbound drops since the last collection.
|
This metric provides the number of outbound carrier errors.
|
This metric provides the number of inbound packets.
|
This metric provides the number of overruns since the last collection.
|
This metric provides the average of the inbound octet rate for this interface.
|
This metric provides the number of inbound octets.
|
This metric provides the number of frame errors.
|
This metric provides the number of inbound errors.
|
This metric provides the number of inbound drops.
|
This metric provides the number of collisions.
|