Description
Metric table
The metric table can include some or all of the following: target version, default collection frequency, default warning threshold, default critical threshold, and alert text.
The metrics in this category provide information about the status of the switch aggregated system.
This metric provides the voltage state.
|
This metric provides the change in cable connectivity.
|
This metric provides the state of the cable connection
|
This metric provides the overall temperature state.
|
This metric provides the overall power state.
|
This metric provides the power redundancy state.
|
This metric provides the locator light.
|
This metric provides the InfiniBand state.
|
This metric provides the health status.
|
This metric provides the cooling redundancy state.
|
The metrics in this category provide information about the switch basic status.
This metric provides the status of the switch.
|
This metric indicates whether the switch is powered on.
|
This metric indicates whether the locator light is on.
|
The metrics in this category provide information about the switch ports statistics.
This metric provides the rate of outgoing errors.
|
This metric provides the total number of outgoing octets.
|
This metric provides the total number of outgoing errors.
|
This metric provides the total number of incoming octets.
|
This metric provides the total number of incoming errors.
|
This metric provides the incoming throughput.
|
The metrics in this category provide information about the status of the sensor.
This metric provides the value from the sensor.
|
This metric provides the status of the sensor.
|
This metric provides the read value of the sensor.
|
This metric provides the ID of the hardware component.
|
This metric category provides information about the status of the Systems Infrastructure Oracle InfiniBand Switch - SNMP target.
The metrics in this category provide information about the power supply status.
This metric provides the value of the power supply sensor.
|
This metric provides the status of the power supply.
|
This metric provides the units for the sensor value.
|
This metrics in this category provide information about the network ports performance.
This metric provides the vLAN ID.
|
This metric provides the rate of total octet bits.
|
This metric provides the measurement units for the speed.
|
This metric provides the speed of the link.
|
This metric provides the defined partition keys.
|
This metric provides the number of outbound unicast packets.
|
This metric provides the average of the outbound octet rate for this interface.
|
This metric provides the number of outbound octets.
|
This metric provides the number of outbound multicast packets.
|
This metric provides the number of outbound errors.
|
This metric provides the number of outbound discards.
|
This metric provides the operational status of the port.
|
This metric provides the specific duplex mode of the port.
|
This metric provides the Maximum Transmission Unit (MTU) of the link.
|
This metric provides the number of inbound packets with an unknown protocol.
|
This metric provides the number of inbound unicast packets.
|
This metric provides the average of the inbound octet rate for this interface.
|
This metric provides the number of inbound octets.
|
This metric provides the number of inbound multicast packets.
|
This metric provides the number of inbound errors.
|
This metric provides the information about the number of discarded packets.
|
This metrics in this category provide information about the network ports InfiniBand performance.
This metric provides the width supported by the link.
|
The metric provides the speed supported by the link.
|
This metric provides the LID of the remote port.
|
This metric provides the state of the port.
|
This metric provides the physical link state. The physical link state is 0 if the port is in a polling or disabled state.
|
This metric provides the Local Identifier (LID) of the local port.
|
This metric provides the link state.
|
This metric indicates whether the link is degraded.
|
This metric indicates whether the port is in a polling state.
|
This metric indicates whether the port is disabled.
|
This metric provides the gateway port link mode.
|
This metric provides the width of the port.
|
This metric provides the speed of the node.
|
This metric provides the state of the cable connection.
|
This metric provides the width of the link since the last collection.
|
This metric provides the active speed of the link since the last collection.
|
This metrics in this category provide information about the network ports InfiniBand traffic statistics.
This metric provides the number of packets sent since the last collection.
|
This metric provides the number of bytes sent since the last collection.
|
This metric provides the number of unicast packets sent since the last collection.
|
This metric provides the number of unicast packets received since the last collection.
|
This metric provides the number of packets received since the last collection.
|
This metric provides the number of bytes received.
|
This metric provides the number of multicast packets sent to the port since the last collection.
|
This metric provides the number of multicast packets received by the port since the last collection.
|
The metrics in this category provide information about the network ports InfiniBand events.
The metrics in this category provide information about the network ports InfiniBand error statistics.
This metric provides the number sent discards that occurred since the last collection.
|
This metric provides the number of sent constraint errors since the last collection.
|
This metric provides the number of incoming VL15 packets dropped due to resource limitations on the port.
|
This metric provides the total number of errors.
|
This metric provides the number of symbol errors on the port since the last collection.
|
This metric provides the number of switch relay errors.
|
This metric provides the number of physical errors
|
This metric provides the number of received errors since the last collection.
|
This metric provides the number of received constraint errors received since the last collection.
|
This metric provides the number of times the link error recovery process was completed successfully since the last collection.
|
This metric provides the number of link integrity errors, that is, the number of errors on the local link.
|
This metric provides the number of link-down errors.
|
This metric provides the number of buffer overrun errors since the last collection.
|
The metrics in this category provide information about the network ports ethernet events.
This metric provides the information about the administrative state of the link.
The metrics in this category provide information about the network interfaces performance.
This metric provides the status of the network interface.
|
This metric provides the link state.
|
This metric provides the number of outbound packets.
|
This metric provides the number of outbound overruns since the last collection.
|
This metric provides the average of the outbound octet rate for this interface.
|
This metric provides the number of outbound octets.
|
This metric provides the number of outbound errors.
|
This metric provides the number of outbound drops since the last collection.
|
This metric provides the number of outbound carrier errors.
|
This metric provides the number of inbound packets.
|
This metric provides the number of overruns since the last collection.
|
This metric provides the average of the inbound octet rate for this interface.
|
This metric provides the number of inbound octets.
|
This metric provides the number of frame errors.
|
This metric provides the number of inbound errors.
|
This metric provides the number of inbound drops.
|
This metric provides the number of collisions.
|
The metrics in this category provide information about the network interfaces bandwidth.
This metric provides the percentage of output errors on the interface.
|
This metric provides the average input operations over 10 minutes.
|
This metric provides the percentage of input/output errors.
|
This metric provide the percentage of input errors on the interface.
|
This metric provides the average input operations over 10 minutes.
|
This metric provides the amount of bandwidth used since the last collection.
|
This metric provides the average percentage of activity over 10 minutes.
|
This metric provides the average input/output operations over 10 minutes.
|
This metric provides the total network collisions (in percentage) of the network interface since the last collection.
|
The metrics in this category provide information about the Network Datalinks performance.
This metric provides the status of the datalink.
|
This metric provides the link state.
|
This metric provides the number of outbound packets.
|
This metric provides the average of the outbound octet rate for this interface.
|
This metric provides the number of outbound octets.
|
This metric provides the number of outbound multicasts.
|
This metric provides the number of outbound multicast octets.
|
This metric provides the number of outbound errors.
|
This metric provides the number of outbound drops since the last collection.
|
This metric provides the number of outbound dropped octets.
|
This metric provides the number of outbound broadcasts.
|
This metric provides the number of outbound broadcast octets.
|
This metric provides the number of inbound packets.
|
This metric provides the number of inbound octets.
|
This metric provides the number of inbound octets.
|
This metric provides the number of inbound multicasts.
|
This metric provides the number of inbound multicast octets.
|
This metric provides the number of inbound errors.
|
This metric provides the number of inbound drops.
|
This metric provides the number of inbound dropped octets.
|
This metric provides the number of inbound broadcasts.
|
This metric provides the number of inbound broadcast octets.
|
This metric provides the number of collisions.
|
The metrics in this category provide information about the component state.
The metric provides information about errors.
|
This metric provides the state of the component.
|