System health check utility syscheck output can be either Normal (brief) or Verbose (more detailed), depending upon how syscheck was initiated. The following examples show Normal and Verbose output formats:
Running modules in class disk...
OK
Running modules in class hardware...
OK
Running modules in class net...
OK
Running modules in class proc...
OK
Running modules in class services...
OK
Running modules in class system...
OK
Running modules in class upgrade...
OK
If an error occurs, the system health check utility syscheck provides alarm data strings and diagnostic information for platform errors in its output. The following is an example of Verbose syscheck output:
Running modules in class disk...
drbd: Checking DRBD status file, /proc/drbd
drbd: line #1: DRBD version=[8.3.11]
drbd: line #2 contains DRBD compilation info
drbd: line #3: resource=[0]
drbd: line #3: cs{0}=[Connected]
drbd: line #3: st_self{0}=[Primary] st_peer{0}=[Secondary]
drbd: line #3: ds_self{0}=[UpToDate] ds_peer{0}=[UpToDate]
drbd: line #4 contains network stats
drbd: processing alarms for resource=0
fs: Current file space use in "/" is 43%.
fs: Current Inode used in "/" is 14%.
fs: Current file space use in "/boot" is 41%.
fs: Current Inode used in "/boot" is 0%.
fs: Current file space use in "/usr" is 57%.
fs: Current Inode used in "/usr" is 20%.
fs: Current file space use in "/var" is 34%.
fs: Current Inode used in "/var" is 4%.
fs: Current file space use in "/var/TKLC" is 40%.
fs: Current Inode used in "/var/TKLC" is 1%.
fs: Current file space use in "/tmp" is 0%.
fs: Current Inode used in "/tmp" is 0%.
fs: Current file space use in "/usr/TKLC/elap" is 6%.
fs: Current Inode used in "/usr/TKLC/elap" is 0%.
fs: Current file space use in "/var/TKLC/elap/drbd/mysql" is 4%.
fs: Current Inode used in "/var/TKLC/elap/drbd/mysql" is 0%.
fs: Current file space use in "/var/TKLC/elap/logs" is 0%.
fs: Current Inode used in "/var/TKLC/elap/logs" is 0%.
fs: Current file space use in "/var/TKLC/elap/free" is 3%.
fs: Current Inode used in "/var/TKLC/elap/free" is 0%.
hpdisk: Only HP ProLiant servers support hpdisk diagnostics.
lsi: Could not find LSI controller. Not running test.
meta: Checking md status on system.
meta: md Status OK, with 3 active volumes.
meta: Checking md configuration on system.
meta: Server md configuration OK.
multipath: No multipath devices configured to be checked.
sas: Only T1200 supports SAS diagnostics.
smart: Finished examining logs for disk: sdb.
smart: Finished examining logs for disk: sda.
smart: SMART status OK.
write: Successfully read from file system "/".
write: Successfully read from file system "/boot".
write: Successfully read from file system "/usr".
write: Successfully read from file system "/var".
write: Successfully read from file system "/var/TKLC".
write: Successfully read from file system "/tmp".
write: Successfully read from file system "/usr/TKLC/elap".
write: Successfully read from file system "/var/TKLC/elap/logs".
write: Successfully read from file system "/var/TKLC/elap/free".
Running modules in class hardware...
cmosbattery: This hardware does not support monitoring the CMOS battery.
cmosbattery: The test will not be ran.
ecc: Checking ECC hardware.
ecc: Correctible Error Count: 0
ecc: Uncorrectible Error Count: 0
06/20/2016 05:11:30 EDT | inf | Discarding cache...
fan: Checking Status of Server Fans.
fan: Fan is OK. fana: 1, CHIP: FAN
fan: Server Fan Status OK.
fancontrol: EAGLE_E5APPB does not support Fan Controls
fancontrol: Will not run the test.
flashdevice: Checking programmable devices.
flashdevice: PSOC OK.
flashdevice: CPLD OK.
flashdevice: BIOS OK.
flashdevice: ALL Programmable Devices OK.
mezz: Checking Status of Serial Mezzanine.
mezz: Serial Mezzanine is OK. mezza: 1, CHIP: MEZZ
mezz: Serial Mezzanine is OK. mezzb: 1, CHIP: MEZZ
mezz: Server Serial Mezz Status OK.
oemHW: Only Oracle servers support hwmgmt.
psu: This hardware does not support power feed monitoring.
psu: Will not run test.
psu: This hardware does not support PSU monitoring.
psu: Will not run test.
serial: Running serial port configuration test
serial: EAGLE_E5APPB does not support serial port configuration monitoring
serial: Will not run test.
temp: Checking server temperature.
temp: Server Temp OK. Inlet Air Temp: +25.0 C (high = +70.0 C, warn = +66 C, hyst = +75.0 C), CHIP: lm75-i2c-0-48
temp: Server Temp OK. Outlet Air Temp: +30.0 C (high = +70.0 C, warn = +66 C, hyst = +75.0 C), CHIP: lm75-i2c-0-49
temp: Server Temp OK. MCH Diode Temp: +41.0 C (high = +95.0 C, warn = +90 C, low = +10.0 C), CHIP: sch311x-isa-0a70
temp: Server Temp OK. Internal Temp: +26.8 C (high = +95.0 C, warn = +90 C, low = +10.0 C), CHIP: sch311x-isa-0a70
temp: Server Temp OK. Core 0: +30.0 C (high = +71.0 C, crit = +95.0 C, warn = +67 C), CHIP: coretemp-isa-0000
temp: Server Temp OK. Core 1: +24.0 C (high = +71.0 C, crit = +95.0 C, warn = +67 C), CHIP: coretemp-isa-0000
voltage: Checking server voltages.
voltage: Voltage is OK. V2.5: +2.44 V (min = +2.37 V, max = +2.63 V), CHIP: sch311x-isa-0a70
voltage: Voltage is OK. Vccp: +1.04 V (min = +0.85 V, max = +1.35 V), CHIP: sch311x-isa-0a70
voltage: Voltage is OK. V3.3: +3.27 V (min = +3.13 V, max = +3.47 V), CHIP: sch311x-isa-0a70
voltage: Voltage is OK. V5: +4.97 V (min = +4.74 V, max = +5.26 V), CHIP: sch311x-isa-0a70
voltage: Voltage is OK. V1.8: +1.81 V (min = +1.69 V, max = +1.88 V), CHIP: sch311x-isa-0a70
voltage: Voltage is OK. V3.3stby: +3.28 V (min = +3.13 V, max = +3.47 V), CHIP: sch311x-isa-0a70
voltage: Voltage is OK. V3.3: +3.29 V (min = +3.13 V, max = +3.46 V), CHIP: cy8c27x43-i2c-0-28
voltage: Voltage is OK. V1.8: +1.81 V (min = +1.71 V, max = +1.89 V), CHIP: cy8c27x43-i2c-0-28
voltage: Voltage is OK. V1.5: +1.50 V (min = +1.42 V, max = +1.57 V), CHIP: cy8c27x43-i2c-0-28
voltage: Voltage is OK. V1.2: +1.20 V (min = +1.14 V, max = +1.26 V), CHIP: cy8c27x43-i2c-0-28
voltage: Voltage is OK. V1.05: +1.04 V (min = +1.00 V, max = +1.10 V), CHIP: cy8c27x43-i2c-0-28
voltage: Voltage is OK. V1.0: +1.00 V (min = +0.95 V, max = +1.05 V), CHIP: cy8c27x43-i2c-0-28
voltage: Server Voltages OK.
Running modules in class net...
defaultroute: Checking default route(s)
defaultroute: Checking static default route through device eth01 to gateway 192.168.61.250...
ping: Checking ping hosts
ping: prova-ip network connection OK
ping: provb-ip network connection OK
ping: dsmm-a network connection OK
ping: dsmm-b network connection OK
ping: dsmb-a network connection OK
ping: dsmb-b network connection OK
ping: sync-a network connection OK
ping: sync-b network connection OK
OK
Running modules in class proc...
run: Checking RTCtimeStampd...
run: Found 1 instance(s) of the RTCtimeStampd process.
run: Checking ntdMgr...
run: Found 1 instance(s) of the ntdMgr process.
run: Checking smartd...
run: Found 1 instance(s) of the smartd process.
run: Checking switchMon...
run: Found 1 instance(s) of the switchMon process.
run: Checking atd...
run: Found 1 instance(s) of the atd process.
run: Checking crond...
run: Found 1 instance(s) of the crond process.
run: Checking snmpd...
run: Found 1 instance(s) of the snmpd process.
run: Checking sshd...
run: Found 7 instance(s) of the sshd process.
run: Checking syscheck...
run: Found 1 instance(s) of the syscheck process.
run: Checking rsyslogd...
run: Found 1 instance(s) of the rsyslogd process.
run: Checking tklcTpdCardCfgS...
run: Found 1 instance(s) of the tklcTpdCardCfgS process.
run: Checking alarmMgr...
run: Found 1 instance(s) of the alarmMgr process.
run: Checking tpdProvd...
run: Found 1 instance(s) of the tpdProvd process.
run: Checking trpd...
run: Found 1 instance(s) of the trpd process.
run: Checking prov...
run: Found 1 instance(s) of the prov process.
run: Checking ebdad...
run: Found 1 instance(s) of the ebdad process.
run: Checking hsopd...
run: Found 1 instance(s) of the hsopd process.
run: Checking maint...
run: Found 1 instance(s) of the maint process.
run: Checking exinit...
run: Found 1 instance(s) of the syscheck process.
run: Checking rsyslogd...
run: Found 1 instance(s) of the rsyslogd process.
run: Checking tklcTpdCardCfgS...
run: Found 1 instance(s) of the tklcTpdCardCfgS process.
run: Checking alarmMgr...
run: Found 1 instance(s) of the alarmMgr process.
run: Checking tpdProvd...
run: Found 1 instance(s) of the tpdProvd process.
run: Checking trpd...
run: Found 1 instance(s) of the trpd process.
run: Checking prov...
run: Found 1 instance(s) of the prov process.
run: Checking ebdad...
run: Found 1 instance(s) of the ebdad process.
run: Checking hsopd...
run: Found 1 instance(s) of the hsopd process.
run: Checking maint...
run: Found 1 instance(s) of the maint process.
run: Checking exinit...
run: Found 1 instance(s) of the exinit process.
run: Checking gs...
run: Found 1 instance(s) of the gs process.
run: Checking mysqld...
run: Found 1 instance(s) of the mysqld process.
run: Checking hamond...
run: Found 1 instance(s) of the hamond process.
OK
Running modules in class services...
ha_keepalive: HA Keepalive Syscheck Test Start
ha_keepalive: { Broadcast eth04 17401}: UP
ha_keepalive: HA Keepalive Test Complete
ha_transition: HA Transition Syscheck Test Start
ha_transition: HA ACTIVE, no transition in progress.
ha_transition: HA Transition Syscheck Test Complete
OK
Running modules in class system...
core: Checking for core files.
cpu: Found "2" CPU(s)... OK
cpu: CPU 0 is on-line... OK
cpu: CPU 0 speed: 2660.017 MHz... OK
cpu: CPU 1 is on-line... OK
cpu: CPU 1 speed: 2660.017 MHz... OK
kdump: Checking for kernel dump files.
mem: Skipping expected memory check.
mem: Minimum expected memory found.
mem: 8252936192 bytes (~7871 Mb) of RAM installed.
OK
Running modules in class upgrade...
snapshots: No snapshots found. Not running test.
OK