PDBI Connections are managed through the HLR GUI. This task describes how to set up PDBI connections. For additional information about PDBI connections, see the HLR Online Help.
You can only perform this task when logged into the Active Primary NOAM.
- Select .
The Eagle XG Database > Configuration > PDBI > Options page appears.
- Enter the port number for the unsecure listening port in the TCP Listening Port field.
This port can be disabled by setting the value to 0. Changes to the TCP Listening port do not take affect until the client process is restarted.
- Enter the port number for the SSL (Secure Socket Layer) listening port in the SSL Listening Port field.
This port can be disabled by setting the value to 0. Changes to the SSL Listening port do not take affect until the client process is restarted.
- If not already checked, select Allow Connections.
- Enter the maximum number of simultaneous connections you want to allow in the Max Connections field.
This value can be set between 1 and 128 connections.
- Enter the number of seconds you want to allow to pass between the establishment of a network connection and a connection message being received without causing a timeout in the Connection Init Timeout field.
This value can be set between 0 and 60 seconds.
- Click Apply.
A successful update message appears.
- Select Eagle XG Database > Configuration > PDBI > Connections.
The Eagle XG Database > Configuration > PDBI > Connections page appears.
- Click Insert.
The Eagle XG Database > Configuration > PDBI > Connections [Insert] page appears.
- Enter the System ID in the System ID field.
This is a 1 - 32 character identifier for the connection.
- Enter the IP address (either an IPv4 or IPV6 address) or the connection in the IP Address field.
This must match the IP address for the client.
- Select the permissions level for the connection from the Permissions pulldown menu.
- Select READ_ONLY to grant read only access for the client with this connection. This is the default.
- Select READ_WRITE to grant read and write access for the client with this connection.
- Perform one of these options:
- Click OK to save the PDBI connection and exit this page.
- Click Apply to save the PDBI connection and remain on this page.
PDBI client connection requests are now allowed for the configured PDBI connection.