Site Traces

Creating A Site Trace

A site trace is created from the Diameter > Troubleshooting with IDIH > Configuration > Traces screen. Select Trace Location as Site Trace when creating the trace. All trace content types, content values, scope types, and scope values are supported.

A site trace can only be created (and edited and deleted) on the site that will run the trace. When a site trace is created, IDIH will record the site at which the trace was created, and will only allow a GUI launched from that site to edit, delete, start or stop the trace.

Starting A Site Trace

A site trace is started from the Diameter > Troubleshooting with IDIH > Maintenance > Traces screen. A site trace can only be started from the GUI at the site that created the trace.

Running A Site Trace

The site trace is only executed on the DA-MPs in the site where the site trace was created. DA-MPs will send all TTRs that match site traces to the local site IDIH.

Stopping A Site Trace

A site trace can be manually stopped from the from the Diameter > Troubleshooting with IDIH > Maintenance > Traces screen. A site trace can only be stopped from the GUI at the site that is running the trace. A site trace will be automatically stopped when either the Time Duration or Number of Matches limits are reached.

Viewing Site Trace Status

The status of site traces can be viewed from the Diameter > Troubleshooting with IDIH > Maintenance > Traces. The status of a site trace can only be viewed from the GUI at the site that is running the trace.