In See It! mode, there is a predetermined delay time between each action. This delay controls the amount of time that elapses between the appearance of the frame and the start of the action. The delay gives the user time to read the text in the bubble before the action starts. By default, the delay for all frames is 5 seconds. However, you can change the default frame delay time. You can either use a selection from the Frame Delay list or enter another delay time manually. If you choose the 0 or skip option, a "0" frame delay is applied to all action frames and "Skip" is applied to non-action frames. As a result, the playback for action frames starts immediately when the frame appears and for non-action frames, the playback skips the frame and moves immediately to the next frame. If you choose the Infinite option, the playback waits for the user to press ENTER before advancing to the next step. The bubble automatically displays the text "Press ENTER to continue."
Warning! Be careful when setting the default Frame Delay to 0 or skip. This setting causes the playback in See It! mode to skip the Introduction, End and Explanation frames for all newly recorded content.