The Reconcile command request issues a direct request to ELS to run the RECONcil command. Reconcile performs cross-checks between the MVCs, VTVs, Storage Class, and Management Class definitions. VTVs are optionally moved from one Storage Class to another to reconcile VTV media and location.
Select Management and Reconcile on the navigation tree to display this pane.
Select the tapeplex to reconcile on the drop-down list.
Select one of the following to define which MVCs will be checked:
Click All MVCs to select all MVCs as reconciliation candidates.
MVCs can be further filtered to reconcile the following:
If Reconcile by All VTVs is also selected, All VTVs in All MVCs will be reconciled.
Select optional parameters:
MAXMVC: Specifies the maximum number of MVCs that will be processed by a single reconciliation task. Valid values are 1 to 98. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
ELAPSE: Specifies the maximum time for the reconciliation in minutes. Valid values are 1 to 1440. If not specified, there is no time limit on the reconciliation process. This parameter is ignored if MOVEVTV is not specified.
CONMVC: Specifies the maximum number of MVCs that VTCS concurrently processes during subsequent recall and migrate operations. Valid values are 1 to 99. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
MOVEVTV: Move VTVs per the currently active Management Policies as specified by the MGMTclas statements that apply to the VTVs. If you do not specify MOVEVTV, only a report is generated and no VTVs are moved.
Submit the request:
In the Run Command on field, select Any Host or Specific Host. If you select Specific Host, identify the host in the Server Address field.
Click SUBMIT to continue. A confirmation dialog box is displayed. Click YES to submit the request to the host, or click NO to return to the previous pane.
When the operation is completed, the results are available for display on the Command Log pane.
If Reconcile by VTV is also selected, only the selected VTVs in all MVCs will be reconciled. Enter the VTV volsers to reconcile, separated by commas, or click the magnifying glass to display the Select VTVs dialog box.
In the Select VTVs dialog box, type in your search string and then click Apply. The search operator looks for volsers containing the search string.
The search results are listed in the Tapeplex and VTV Volser fields.
To search again, click Reset to blank the search field and start over.
To select a volser, click the volser and then click OK.
To select more than one volser, click the first volser, then press CTRL while clicking the other volsers required. Use the arrow button to move the volsers to the Selected column. Then click OK.
To select a range of volsers, click the first volser in the range and then press SHIFT and the down arrow key simultaneously to define and highlight the range. Use the arrow button to move the range of volsers to the Selected column. Then click OK.
Selected VTVs are displayed on the Reconcile Command pane.
Select optional parameters:
MAXMVC: Specifies the maximum number of MVCs that will be processed by a single reconciliation task. Valid values are 1 to 98. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
ELAPSE: Specifies the maximum time for the reconciliation in minutes. Valid values are 1 to 1440. If not specified, there is no time limit on the reconciliation process. This parameter is ignored if MOVEVTV is not specified.
CONMVC: Specifies the maximum number of MVCs that VTCS concurrently processes during subsequent recall and migrate operations. Valid values are 1 to 99. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
MOVEVTV: Move VTVs per the currently active Management Policies as specified by the MGMTclas statements that apply to the VTVs. If you do not specify MOVEVTV, only a report is generated and no VTVs are moved.
Submit the request:
In the Run Command on field, select Any Host or Specific Host. If you select Specific Host, identify the host in the Server Address field.
Click SUBMIT to continue. A confirmation dialog box is displayed. Click YES to submit the request to the host, or click NO to return to the previous pane.
When the operation is completed, the results are available for display on the Command Log pane.
If Reconcile by Management Class is also selected, all VTVs in the selected Management Classes in all MVCs will be reconciled. Click the magnifying glass to display a dialog box with all defined Management Classes in the specified tapeplex.
In the Available column, click the class to reconcile and then click the arrow button to move it to the Selected column. Then click OK.
To select more than one class, click the first class, then press CTRL while clicking the other classes required. Use the arrow button to move the classes to the Selected column. Then click OK.
To select a range of classes, click the first class in the range and then press SHIFT and the down arrow key simultaneously to define and highlight the range. Use the arrow button to move the range of classes to the Selected column. Then click OK.
To move all classes to the Selected column, click the double arrow button. Then click OK.
The selected Management Classes are displayed on the Reconcile Command pane.
Select optional parameters:
MAXMVC: Specifies the maximum number of MVCs that will be processed by a single reconciliation task. Valid values are 1 to 98. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
ELAPSE: Specifies the maximum time for the reconciliation in minutes. Valid values are 1 to 1440. If not specified, there is no time limit on the reconciliation process. This parameter is ignored if MOVEVTV is not specified.
CONMVC: Specifies the maximum number of MVCs that VTCS concurrently processes during subsequent recall and migrate operations. Valid values are 1 to 99. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
MOVEVTV: Move VTVs per the currently active Management Policies as specified by the MGMTclas statements that apply to the VTVs. If you do not specify MOVEVTV, only a report is generated and no VTVs are moved.
Submit the request:
In the Run Command on field, select Any Host or Specific Host. If you select Specific Host, identify the host in the Server Address field.
Click SUBMIT to continue. A confirmation dialog box is displayed. Click YES to submit the request to the host, or click NO to return to the previous pane.
When the operation is completed, the results are available for display on the Command Log pane.
Click MVC to specify selected MVCs as reconciliation candidates.
If Reconcile by MVC is selected, enter the MVC volsers to reconcile, separated by commas, or click the magnifying glass to display the Select MVCs dialog box.
In the Select MVCs dialog box, type in your search string and then click Apply. The search operator looks for volsers containing the search string.
The search results are listed in the Tapeplex and MVC Volser fields.
To search again, click Reset to blank the search field and start over.
To select a volser, click the volser and then click OK.
To select more than one volser, click the first volser, then press CTRL while clicking the other volsers required. Use the arrow button to move the volsers to the Selected column. Then click OK.
To select a range of volsers, click the first volser in the range and then press SHIFT and the down arrow key simultaneously to define and highlight the range. Use the arrow button to move the range of volsers to the Selected column. Then click OK.
Selected VTVs are displayed on the Reconcile Command pane.
MVCs can be further filtered to reconcile the following:
If Reconcile by All VTVs is also selected, all VTVs in the selected MVCs will be reconciled.
Select optional parameters:
MAXMVC: Specifies the maximum number of MVCs that will be processed by a single reconciliation task. Valid values are 1 to 98. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
ELAPSE: Specifies the maximum time for the reconciliation in minutes. Valid values are 1 to 1440. If not specified, there is no time limit on the reconciliation process. This parameter is ignored if MOVEVTV is not specified.
CONMVC: Specifies the maximum number of MVCs that VTCS concurrently processes during subsequent recall and migrate operations. Valid values are 1 to 99. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
MOVEVTV: Move VTVs per the currently active Management Policies as specified by the MGMTclas statements that apply to the VTVs. If you do not specify MOVEVTV, only a report is generated and no VTVs are moved.
Submit the request:
In the Run Command on field, select Any Host or Specific Host. If you select Specific Host, identify the host in the Server Address field.
Click SUBMIT to continue. A confirmation dialog box is displayed. Click YES to submit the request to the host, or click NO to return to the previous pane.
When the operation is completed, the results are available for display on the Command Log pane.
If Reconcile by VTV is also selected, only the selected VTVs in the selected MVCs will be reconciled. Enter the VTV volsers to reconcile, separated by commas, or click the magnifying glass to display the Select VTVs dialog box.
In the Select VTVs dialog box, type in your search string and then click Apply. The search operator looks for volsers containing the search string.
The search results are listed in the Tapeplex and VTV Volser fields.
To search again, click Reset to blank the search field and start over.
To select a volser, click the volser and then click OK.
To select more than one volser, click the first volser, then press CTRL while clicking the other volsers required. Use the arrow button to move the volsers to the Selected column. Then click OK.
To select a range of volsers, click the first volser in the range and then press SHIFT and the down arrow key simultaneously to define and highlight the range. Use the arrow button to move the range of volsers to the Selected column. Then click OK.
Selected VTVs are displayed on the Reconcile Command pane.
Select optional parameters:
MAXMVC: Specifies the maximum number of MVCs that will be processed by a single reconciliation task. Valid values are 1 to 98. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
ELAPSE: Specifies the maximum time for the reconciliation in minutes. Valid values are 1 to 1440. If not specified, there is no time limit on the reconciliation process. This parameter is ignored if MOVEVTV is not specified.
CONMVC: Specifies the maximum number of MVCs that VTCS concurrently processes during subsequent recall and migrate operations. Valid values are 1 to 99. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
MOVEVTV: Move VTVs per the currently active Management Policies as specified by the MGMTclas statements that apply to the VTVs. If you do not specify MOVEVTV, only a report is generated and no VTVs are moved.
Submit the request:
In the Run Command on field, select Any Host or Specific Host. If you select Specific Host, identify the host in the Server Address field.
Click SUBMIT to continue. A confirmation dialog box is displayed. Click YES to submit the request to the host, or click NO to return to the previous pane.
When the operation is completed, the results are available for display on the Command Log pane.
If Reconcile by Management Class is also selected, all VTVs in the selected Management Classes in the selected MVCs will be reconciled. Click the magnifying glass to display a dialog box with all defined Management Classes in the specified tapeplex.
In the Available column, click the class to reconcile and then click the arrow button to move it to the Selected column. Then click OK.
To select more than one class, click the first class, then press CTRL while clicking the other classes required. Use the arrow button to move the classes to the Selected column. Then click OK.
To select a range of classes, click the first class in the range and then press SHIFT and the down arrow key simultaneously to define and highlight the range. Use the arrow button to move the range of classes to the Selected column. Then click OK.
To move all classes to the Selected column, click the double arrow button. Then click OK.
The selected Management Classes are displayed on the Reconcile Command pane.
Select optional parameters:
MAXMVC: Specifies the maximum number of MVCs that will be processed by a single reconciliation task. Valid values are 1 to 98. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
ELAPSE: Specifies the maximum time for the reconciliation in minutes. Valid values are 1 to 1440. If not specified, there is no time limit on the reconciliation process. This parameter is ignored if MOVEVTV is not specified.
CONMVC: Specifies the maximum number of MVCs that VTCS concurrently processes during subsequent recall and migrate operations. Valid values are 1 to 99. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
MOVEVTV: Move VTVs per the currently active Management Policies as specified by the MGMTclas statements that apply to the VTVs. If you do not specify MOVEVTV, only a report is generated and no VTVs are moved.
Submit the request:
In the Run Command on field, select Any Host or Specific Host. If you select Specific Host, identify the host in the Server Address field.
Click SUBMIT to continue. A confirmation dialog box is displayed. Click YES to submit the request to the host, or click NO to return to the previous pane.
When the operation is completed, the results are available for display on the Command Log pane.
Click Storage Class to specify MVCs in selected Storage Classes as reconciliation candidates.
If Reconcile by Storage Class was selected, click the magnifying glass to display a dialog box with all Storage Classes in the specified tapeplex.
In the Available column, click the Storage Class and then click the arrow button to move it to the Selected column. Then click OK.
To select more than one Storage Class, click the first Storage Class, then press CTRL while clicking the other Storage Classes required. Use the arrow button to move the Storage Classes to the Selected column. Then click OK.
To select a range of Storage Classes, click the first Storage Class in the range and then press SHIFT and the down arrow key simultaneously to define and highlight the range. Use the arrow button to move the range of Storage Classes to the Selected column. Then click OK.
To move all Storage Classes to the Selected column, click the double arrow button. Then click OK.
The selected Storage Classes are displayed on the Reconcile Command Request pane.
MVCs can be further filtered to reconcile the following:
If Reconcile by All VTVs is also selected, all VTVs in the selected Storage Classes will be reconciled.
Select optional parameters:
MAXMVC: Specifies the maximum number of MVCs that will be processed by a single reconciliation task. Valid values are 1 to 98. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
ELAPSE: Specifies the maximum time for the reconciliation in minutes. Valid values are 1 to 1440. If not specified, there is no time limit on the reconciliation process. This parameter is ignored if MOVEVTV is not specified.
CONMVC: Specifies the maximum number of MVCs that VTCS concurrently processes during subsequent recall and migrate operations. Valid values are 1 to 99. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
MOVEVTV: Move VTVs per the currently active Management Policies as specified by the MGMTclas statements that apply to the VTVs. If you do not specify MOVEVTV, only a report is generated and no VTVs are moved.
Submit the request:
In the Run Command on field, select Any Host or Specific Host. If you select Specific Host, identify the host in the Server Address field.
Click SUBMIT to continue. A confirmation dialog box is displayed. Click YES to submit the request to the host, or click NO to return to the previous pane.
When the operation is completed, the results are available for display on the Command Log pane.
If Reconcile by VTV is also selected, only the selected VTVs in the selected Storage Classes will be reconciled. Enter the VTV volsers to reconcile, separated by commas, or click the magnifying glass to display the Select VTVs dialog box.
In the Select VTVs dialog box, type in your search string and then click Apply. The search operator looks for volsers containing the search string.
The search results are listed in the Tapeplex and VTV Volser fields.
To search again, click Reset to blank the search field and start over.
To select a volser, click the volser and then click OK.
To select more than one volser, click the first volser, then press CTRL while clicking the other volsers required. Use the arrow button to move the volsers to the Selected column. Then click OK.
To select a range of volsers, click the first volser in the range and then press SHIFT and the down arrow key simultaneously to define and highlight the range. Use the arrow button to move the range of volsers to the Selected column. Then click OK.
Selected VTVs are displayed on the Reconcile Command pane.
Select optional parameters:
MAXMVC: Specifies the maximum number of MVCs that will be processed by a single reconciliation task. Valid values are 1 to 98. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
ELAPSE: Specifies the maximum time for the reconciliation in minutes. Valid values are 1 to 1440. If not specified, there is no time limit on the reconciliation process. This parameter is ignored if MOVEVTV is not specified.
CONMVC: Specifies the maximum number of MVCs that VTCS concurrently processes during subsequent recall and migrate operations. Valid values are 1 to 99. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
MOVEVTV: Move VTVs per the currently active Management Policies as specified by the MGMTclas statements that apply to the VTVs. If you do not specify MOVEVTV, only a report is generated and no VTVs are moved.
Submit the request:
In the Run Command on field, select Any Host or Specific Host. If you select Specific Host, identify the host in the Server Address field.
Click SUBMIT to continue. A confirmation dialog box is displayed. Click YES to submit the request to the host, or click NO to return to the previous pane.
When the operation is completed, the results are available for display on the Command Log pane.
If Reconcile by Management Class is also selected, all VTVs in the selected Management Classes in the selected Storage Classes will be reconciled. Click the magnifying glass to display a dialog box with all defined Management Classes in the specified tapeplex.
In the Available column, click the class to reconcile and then click the arrow button to move it to the Selected column. Then click OK.
To select more than one class, click the first class, then press CTRL while clicking the other classes required. Use the arrow button to move the classes to the Selected column. Then click OK.
To select a range of classes, click the first class in the range and then press SHIFT and the down arrow key simultaneously to define and highlight the range. Use the arrow button to move the range of classes to the Selected column. Then click OK.
To move all classes to the Selected column, click the double arrow button. Then click OK.
The selected Management Classes are displayed on the Reconcile Command pane.
Select optional parameters:
MAXMVC: Specifies the maximum number of MVCs that will be processed by a single reconciliation task. Valid values are 1 to 98. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
ELAPSE: Specifies the maximum time for the reconciliation in minutes. Valid values are 1 to 1440. If not specified, there is no time limit on the reconciliation process. This parameter is ignored if MOVEVTV is not specified.
CONMVC: Specifies the maximum number of MVCs that VTCS concurrently processes during subsequent recall and migrate operations. Valid values are 1 to 99. If not specified the CONFIG RECLAIM value (or default) is used. This parameter is ignored if MOVEVTV is not specified.
MOVEVTV: Move VTVs per the currently active Management Policies as specified by the MGMTclas statements that apply to the VTVs. If you do not specify MOVEVTV, only a report is generated and no VTVs are moved.
Submit the request:
In the Run Command on field, select Any Host or Specific Host. If you select Specific Host, identify the host in the Server Address field.
Click SUBMIT to continue. A confirmation dialog box is displayed. Click YES to submit the request to the host, or click NO to return to the previous pane.
When the operation is completed, the results are available for display on the Command Log pane.