The following table contains a list of the hardware verification codes that appear in certain UAMs, and shows the card or application that it applies to, a description of the code, and the UAM code with which it is associated.
|
HW Verification Code |
Card or Application Code |
Description |
Associated UAM Code |
|---|---|---|---|
058 |
SS7IPGW, IPGWI, IPLIM, IPLIMI |
E5-ENET or E5-ENET-B does not support > 16 associations (IPLIMx). E5-ENET or E5-ENET-B does not support > 50 associations (IPGWx). |
422 |
|
059 |
VSCCP |
MPS database has been detected to exceed capacity of Service Module extended memory (only for GPORT, GFLEX, INP, EIR features). UAMs 281, 283, and 285 are used for LNP and LNP ELAP Configuration features. |
422 |
090 |
Various |
Flash image on the card is incompatible with the current release of the EAGLE |
570 |
|
099 |
E5-TSM |
E5-TSM card equipped has one or more daughterboard. |
99 |
|
101 |
SS7IPGW, IPGWI, IPLIM, IPLIMI |
E5-ENET only supports SLK link A-7 and B-7. |
276 |
|
102* |
SS7IPGW, IPGWI |
Non-DCM detected in slot. |
99 |
|
103 |
SS7IPGW, IPGWI, IPLIM, IPLIMI |
E5-ENET or E5-ENET-B does not support >16 associations (IPLIMx). E5-ENET or E5-ENET-B does not support >50 associations (IPGWx). |
276 |
|
104 |
SS7IPGW, IPGWI, IPLIM, IPLIMI |
E5-ENET or E5-ENET-B does not support >0 sockets (IPLIMx). E5-ENET or E5-ENET-B does not support >0 sockets (IPGWx). |
276 |
105 |
SS7IPGW, IPGWI, IPLIM, IPLIMI |
E5-ENET or E5-ENET-B does not support > 0 (sockets + associations) (IPLIMx). E5-ENET or E5-ENET-B does not support > 50 (sockets + associations) (IPGWx). |
276 |
|
106 |
SS7IPGW, IPGWI, IPLIM, IPLIMI |
E5-ENET or E5-ENET-B does not support >3200Kb SCTP buffers (IPLIMx). E5-ENET or E5-ENET-B does not support >3200Kb SCTP buffers (IPGWx). |
276 |
|
124 |
HC-MIM |
Card is not an HC-MIM and is provisioned as a T1 card. |
99 |
|
129 |
HC-MIM, E5-E1T1 |
Card does not support CAS framing. |
297 |
132 |
IPLIM, IPLIMI, HC-MIM, E5-E1T1 |
The actual card in the slot must be a HC-MIM, high capacity MIM or LIME1 if card is provisioned as a LIME1 card. |
99 |
133 |
HC-MIM, E5-E1T1 |
The actual card in the slot must be a high capacity MIM card (either HC-MIM or E5-E1T1) if provisioned with any un-channelized T1 ports. |
99 |
|
134 |
E5-E1T1 |
E5-E1T1 card with SLK provisioned on link greater than 15. |
99 |
|
135 |
E5-E1T1 |
E5-E1T1 card supports only 1 SE-HSL link. |
276 |
136 |
E5-ATM, E5-ATM-B |
E5-ATM card port B is provisioned |
297 |
140 |
MCPHC |
MCP card not running with D2G memory |
422 |
|
141 |
IPS |
E5-IPSM card not running with D2G memory. |
422 |
|
142 |
MCP |
E5-MCPM-B card not running with D4G memory. |
422 |
|
150 |
various |
Card is obsolete. |
47 |
|
165 |
VSCCP |
Hardware configuration does not support configured feature set. |
99 |
|
170 |
EROUTE |
Non-E5-ENET/E5-ENET-B card detected in slot provisioned for eroute with card type STC. |
99 |
|
171 |
STPLAN |
Non-E5-ENET/E5-ENET-B card detected in slot provisioned for STPLAN with card type DCM. |
99 |
|
179 |
E5-ATM-B, E5-ENET-B, E5-E1T1-B |
EPM-B based card detected and MFC is OFF. MFC option needs to be set to ON in STPOPTS before allowing the EPM-B based card. Note that the ON/OFF format is being used. For example, at least one MFC option needs to be set to ON in STPOPTS before allowing an E5-ENET-B card. The various option values that support MFC are STPOPTS:ON={mtplti, mtprsi, mtplprst, uimrd, critalminh, dispactalms, rptlnpmrss, rstrdev, cnvcgda, cnvcgdi, cnvcgdn, cnvcgdn24, gtcnvdflt, ansigflex, archbldid, mfc, cnvcgdn16}. Note: This code is specific to cards that do not support TVG.
|
99 |
180 |
IPLIM, SCCP, SS7ANSI |
IPLIM card equipped with double slot DCM with MOBR on -or- SCCP card equipped with TSM with MOBR on -or- SS7ANSI card equipped with one of the following with MOBR on: LIMDS0 / LIMV35 / LIMOCU / LIM-AINF / ILA / EILA / LIME1 |
441 |