1249 - SCCP rcvd GSM MAP Opcode w/forbidden param

This message occurs when an MSU is screened in the GSM MAP Screening table and the MSU was found to contain a forbidden parameter as provisioned in the GSM MAP Screening table. The action that applies is taken from the matching entry in the GSM MAP Screening table.

Example

RLGHNCXA21W 00-11-18 18:59:23 EST EAGLE 35.0.0
0018.1249 CARD 1103 INFO SCCP rcvd GSM MAP Op-Code w/forbidden param
OPC=001-001-001
CDPA: NI=1 RI=0 GTI=04 SSNI=0 PCI=1
TT=250 NP=04 NAI=010 ADDR=123456789012345678901
PC=003-003-003 SSN=005
CGPA: NI=1 RI=0 GTI=04 SSNI=0 PCI=1
TT=100 NP=07 NAI=012 ADDR=012345678901234567890
PC=001-001-001 SSN=004
DATA=3a e2 38 c7 04 56 04 72 e0 e8 30 e9
2e cf 01 00 d0 02 83 01 f2 25 aa 0b
84 09 01 00 11 0a 19 49
Op-Code=### Forbidden Param=N/A Action=PASS

Legend

ADDR: Address
CDPA: Called party address
CGPA: Calling party address
DATA: Hex dump of TCAP part of MSU
GTI: Global title indicator
NAI: Nature of address indicator
NI: Network indicator value
NP: Numbering plan
OP-CODE: Operation Code
OPC: Origination point code
PARAM: Parameter
PC: Point code
PCI: Protocol control information
RI: Routing indicator
SIO: Service information octet
SSN: Subsystem number
SSNI: Subsystem number indicator
TT: Translation type

Alarm Level: No alarm condition. The message is informational only.

Recovery

The GSMMAP Screening table has successfully screened the forbidden parameter.

The resultant action is performed from the matching entry.
To alter the screening being performed, redefine the GSMMAP Screening table using the gsmmap commands.