EvTrCnxFail
- Measurement ID
- 9404
- Measurement Group
- Transport Exception
- Measurement Type
- Simple
- Measurement Dimension
- Arrayed (per Transport)
- Description
- The number of times the SCTP connection attempt failed on the transport. This includes only unsuccessful attempts to connect/accept SCTP connections. It does not include failure of established connections.
- The number of times open attempt on UDP socket in Listen Mode failed on the Transport.
- Collection Interval
- 30 min
- Peg Condition
- Each time an SCTP connect attempt fails
- Each time an UDP open attempt in Listen mode fails
- Each time an SCTP open attempt in Listen mode fails
- Measurement Scope
- NE, Server
Recovery
- If all is well, this measurement should have a zero value. A non-zero value indicates that the MP server has attempted to connect to the Peer IP Address at least once and failed to establish the SCTP connection.
- Otherwise:
- Transport status can be viewed at .
- Look in the event history at Event 19402 - Failed to connect Transport, which provides more details as to the actual cause of the failure.
- Verify that the Adjacent Node that represents the far-end of the association is configured with the correct IP address at .
- Verify that the remote port configured at for the association correctly identifies the port that the Adjacent Node is listening on for SCTP connections.
- Verify the IP network connectivity between the MP server and the Adjacent Node.
- If the SG must be configured to connect to the MP server's IP address and port, verify that the SG configuration matches the association configuration at .
- It is recommended to contact My Oracle Support for assistance if needed.