22056 - Connection Admin State Inconsistency Exists

Alarm Group:

DIAM

Description:

An operator request to change the Admin State of a transport connection was not completely processed due to an internal error. The admin state is either disabled from an egress routing perspective but the connection could not be taken out of service or the admin state is enabled from an egress routing perspective but the connection is not in service.

Severity:

Major

Instance:

<TransConnName>

HA Score:

Normal

Auto Clear Seconds:

0 (zero)

OID:

eagleXgDiameterConnAdminStateInconsistencyNotify

Recovery:

1. If the transport connection's Admin State is Disabled but the transport connection was not taken out of service due to an internal error do the following actions to correct the failure:
   1. Enable the connection via the following GUI menu: Diameter > Maintenance > Connections
   2. Wait for this alarm to clear.
   3. Disable the connection via the following GUI menu: Diameter > Maintenance > Connections
2. If the transport connection's Admin State is Enabled but the transport connection was not taken out of service due to an internal error do the following actions to correct the failure:
   1. Disable the connection via the following Diameter > Maintenance > Connections
   2. Wait for this alarm to clear.
   3. Enable the connection via the following GUI menu: Diameter > Maintenance > Connections
3. If the problem persists, it is recommended to contact My Oracle Support.