EvAsnUpAckTO
- Measurement ID
- 9141
- Measurement Group
- Association Exception
- Measurement Type
- Simple
- Measurement Dimension
- Arrayed (per association)
- Description
- The number of times the association timed out waiting for ASP-UP-ACK. ASP-UP-ACK is sent by the far-end in response to an ASP-UP message during the association start-up (when the association is in the Enabled administrative state).
- Collection Interval
- 30 min
- Peg Condition
- This measurement is incremented by one each time an ASP-UP has been sent and the M3UA State Management ACK Timer expires, but no ASP-UP-ACK has been received for the association.
- Measurement Scope
- NE, Server
Recovery
- This measurement should have a zero value. If the value is not zero, the association cannot be brought into the state necessary for M3UA ASPTM traffic because the far-end of the association is not responding by sending an ASP-UP-ACK prior to the timeout defined in the GUI under . The field that defines the timeout is the State Management ACK Timer.
- You can view Association status from the GUI main menu under .
- Check the event history from the GUI main menu under , looking for Event ID 19226. Event ID 19226 will show when the timeout occurred.
- Verify that the far-end of the association on the SG is not undergoing maintenance.
- Verify that the State Management ACK Timer value is not set too short. This should not occur if the IP network is functioning correctly.
- Verify that the IP network between the MP server and the SG is performing up to expectations.
- It is recommended to contact My Oracle Support for assistance if needed.