TmTrEnaNotUp
- Measurement ID
- 9410
- Measurement Group
- Transport Performance
- Measurement Type
- Simple
- Measurement Dimension
- Arrayed (per Transport)
- Description
- The number of seconds during the reporting interval during which the transport was in the Enabled administrative state but was not in APP-UP protocol state. When the transport is Enabled, the desired protocol state is APP-UP. This measurement indicates the amount of time during the reporting interval for which the association was not in the desired protocol state.
- Collection Interval
- 30 min
- Peg Condition
- Time shall be accumulated for this measurement during the collection interval when all of the following are true:
- the association is in the ENABLED administrative state
- the association is not in the ASP-UP protocol state for M3UA and APP-UP for other Plugins
- Measurement Scope
- NE, Server
Recovery
- If all is well, this measurement should have a zero value. A non-zero value indicates that the MP server has attempted to connect to the Peer IP Address at least once and failed to establish the SCTP connection.
- Otherwise:
- Association status can be viewed at .
- Verify that the Adjacent server that represents the far-end of the association is configured with the correct IP address at .
- Verify that the remote port configured at for the association correctly identifies the port that the SG is listening on for SCTP connections.
- Verify the IP network connectivity between the MP server and the SG.
- If the Adjacent Node must be configured to connect to the MP server's IP address and port, verify that the Adjacent Node configuration matches the association configuration at .
- It is recommended to contact My Oracle Support for assistance if needed.