19802 - Communication Agent Connection Remotely
Blocked
Alarm Group:
CAF
Description:
This alarm indicates that one or more Communication
Agent connections have been administratively blocked at a remote server
connected to the server, and this is generally done as part of a maintenance
procedure. A connection that is blocked cannot be used by applications to
communicate with other servers, and so this alarm may indicate that
applications are unable to communicate with their expected set of peers.
Note:
It is normal to have this alarm if the
connection is in the Blocked administrative state on the far-side of the
connection.
Severity:
Minor
Instance:
N/A
Note:
This alarm is cleared when:
Locally UNBLOCKed: An Admin Action to locally
UNBLOCK the service connection and no other connection is locally blocked.
Deleted: The MP Server/Connection is deleted.
Failed: The Connection is terminated, due to
Admin Disable action or Heartbeat failure or remote end initiated disconnection
or any other reason.
HA Score:
Normal
Auto Clear Seconds:
0 (zero)
OID:
cAFConnRemoteBlockedNotify
Recovery:
Use
Main
Menu > Alarms &
Events > View
History to find additional information about the
alarm.
The information can be found by locating the row
with a sequence number that matches the active alarm sequence number and
viewing the Additional Info column.
Check the event history logs at
Main
Menu > Alarms &
Events > View
History for additional Communication Agent events or
alarms from this MP server.
Use
Main
Menu > Communication
Agent > Maintenance > Connection Status to determine which
connections on the server have abnormal status.
If the expected set of connections is locally
blocked, then no further action is necessary.
To remove a the local block condition for a
connection, use the
Main
Menu > Communication
Agent > Maintenance > Connection Status screen and click
Enable button for the connection.