Go to primary content
User Data Repository Alarms, KPIs, and Measurements
Release 12.4
E82598-01
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

EvLnkActAckTO

Measurement ID
9120
Measurement Group
Link Exception
Measurement Type
Simple
Measurement Dimension
Arrayed (per link)
Description
The number of times the link timed out waiting for ASP-ACTIVE-ACK. An ASP-ACTIVE-ACK is sent by the SG in response to an ASP-ACTIVE message on the link. The link is not available for M3UA data signaling until the ASP-ACTIVE-ACK is received.
Collection Interval
30 min
Peg Condition
This measurement is incremented by one each time an ASP-ACTIVE has been sent for the link and the M3UA State Management ACK timer has expired, but no ASP-ACTIVE-ACK was received for the link.
Measurement Scope
NE, Server

Recovery

  1. This measurement should have a zero value. You can view Link status from the GUI main menu under SS7/Sigtran > Maintenance > Links.
  2. Check the event history log from the GUI main menu under Alarms & Events > View History. Look for Event ID 19229, which shows when the ASP-ACTIVE-ACK timeout occurs.
  3. Verify that the far-end of the link on the SG is not undergoing maintenance.
  4. Verify that the State Management ACK Timer period is not set too short.
  5. Verify that the IP network between the MP server and the SG is performing up to expectations.
  6. It is recommended to contact My Oracle Support for assistance if needed.