Go to primary content
User Data Repository Alarms, KPIs, and Measurements
Release 12.4
E82598-01
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

EvSctpAdjPToDwn

Measurement ID
9424
Measurement Group
Transport Exception
Measurement Type
Simple
Measurement Dimension
Arrayed (per Transport)
Description
Number of times configured IP Address of an Adjacent Node goes from Available to Unavailable.
Collection Interval
30 min
Peg Condition
This measurement shall be incremented by one each time reachability to a configured IP address of an Adjacent Node is lost, indicating a fault in the path to that address was detected. If all is well, the measurement will have a zero value. A non-zero value indicates that a path fault to that address was detected.
Measurement Scope
NE, Server

Recovery

  1. Check the event history log at Main Menu > Alarms & Events > View History; look for event ID 19410. Event ID 19410 provides more details about the actual cause of the failure.
  2. Verify that the Adjacent Node that represents the far-end of the association is configured with the correct IP address at Main Menu > Transport Manager > Configuration > Adjacent Node.
  3. Verify IP network connectivity between the MP server and the Adjacent Nodes IP address using a ping or traceroute command.
  4. If the problem persists, it is recommended to contact My Oracle Support.