Using an Import File to update DSR Configuration Data

Use the following procedure to use the contents of a DSR Bulk Import .csv file to update existing configuration data in the system.

1. Select Diameter Common > Import.

   The Diameter Common > Import page appears. The page lists all of the .csv files from the Status & Manage > Files File Management area.

2. Select the File Name for the file to be used to update the configuration data.
3. Specify whether the Import operation should stop processing on the first error that occurs, or should continue processing if errors occur during the Import operation.
   • To continue processing when errors occur, click the Abort On First Error check box so that the box is empty (the default).
   • To stop processing on the first error, click the Abort On First Error check box so that a checkmark appears in the check box.
4. Click Update From CSV.

   A popup window appears to confirm the file to use for the Update From CSV operation.

5. On the popup window, do one of the following actions:
   • OK to perform the Import Update From CSV operation.

     An indication is displayed that the operation is in progress.

   • Cancel to cancel the Update From CSV operation and return to the Diameter Common > Import page.

6. To view the progress of the Import operation, you can:
   • Select the Tasks icon near the top left of the Diameter > Configuration > Import page.
   • Select Status & Manage > Tasks > Active Tasks to open the Status & Manage > Tasks > Active Tasks (Filtered) page.
7. To view the log file from the Import operation, and the Failures.csv file if one was created, click File Management to open the Status & Manage > Files (Filtered) page.