Editing a Capacity Configuration Set

Use this task to edit an existing Capacity Configuration Set.

The changes take effect upon receipt of the next message. Ingress MPS alarms are re-evaluated for all Connections that use the modified Capacity Configuration Set when the changes are replicated to the MP servers.

All Connections that use a particular Capacity Configuration Set must be in the Disabled Admin State before the Reserved Ingress MPS value can be changed. To assistance you in disabling connections refer to Disabling Connections. (The Reserved Ingress MPS field is the only field that requires the Connections to be Disabled before it can be changed.)

The Per Connection Ingress MPS Control feature must be enabled before the Default Capacity Configuration Set can be edited.

The Capacity Configuration Set name cannot be changed.

1. Click Diameter > Configuration > Configuration Sets > Capacity Configuration Sets.
2. Select the Capacity Configuration Set to be edited.
3. Click Edit.

   The Capacity Configuration Sets [Edit] page displays the current values for the selected Capacity Configuration Set.

4. Update the relevant fields.
   The fields are described in Capacity Configuration Set elements.
5. Click OK, Apply, or Cancel.
6. Reference Enabling Connections to enable any Connections that were disabled before the Capacity Configuration Set was changed.