Oracle® Communications UDR Feature Configuration Guide Release 12.4 E93556-01 |
|
Previous |
Next |
You can configure SNMP settings for the CMP system and all Policy Management servers in the topology network. You can configure the Policy Management network such that the CMP system collects and forwards all traps or such that each server generates and delivers its own traps.
Note:
SNMP settings configuration must be done on the active CMP server in the primary cluster. A warning displays if the login is not on the active primary CMP system.To configure SNMP settings:
The field has the following restrictions:
Note:
Note: The IPv6 address is not supported.Note:
To use the SNMP Trap Forwarding feature, enable this option.Note:
Note: To use the SNMP Trap Forwarding feature, disable this option.Enter the SNMP read-write community string.
This field has the following restrictions:
The default value is snmppublic.
The default is TekSNMPUser.
Note:
The SNMPv3 password is also used for msgPrivacyParameters.Note:
To use the SNMP Trap Forwarding feature, enable this option.Note:
To use the SNMP Trap Forwarding feature, disable this option.This is the SNMP read-write community string. This field has the following restrictions:
The default value is snmppublic.
This is the configured Engine ID for SNMPv3. This field has the following restrictions:
The default value is no value (null).
The default value is TekSNMPUser.