Use
this procedure to add an SNMP Manager:
-
Select
.
The SNMP Trapping page opens.
-
Update Enabled
Versions as appropriate.
For more information about Enabled Versions,
or any field on this page, see SNMP administration elements.
-
Select an empty Manager field, and populate it with the hostname
or IP address of the SNMP manager.
-
(Optional) Enable traps from individual servers.
-
(Optional) For SNMPv2c managers, change the SNMPV2c Read-Only
Community Name.
-
(Optional) For SNMPv2c managers, change the SNMPV2c Read-Write
Community Name.
-
(Optional) For SNMPv3 managers, select an SNMPv3 Security Level,
and change:
- SNMPv3 Engine ID
- SNMPv3
Authentication Type
- SNMPv3 Privacy
Type
-
For SNMPv3 managers with user authentication enabled, configure
SNMPv3 Username.
-
For SNMPv3 managers with privacy enabled, configure SNMPv3
Password.
-
Click
OK or
Apply to submit the information.
The new
manager and related settings are saved and activated.