System Messages: CMDTUX Catalog 8300-8399


8300	エラー: パスワード識別子の書式が無効です。%sと${IDENTIFIER}を同時に使用することはできません
	説明	***** and ${IDENTIFIER} cannot be set together for password in OPENINFO.
	アクション	remove ***** or ${IDENTIFIER}.
	関連項目	`tmloadcf`(1), `ubbconfig`(5)
8323	エラー: では-xオプションがtmloadcfを実行する必要があります。
	説明	***** should be executed with -x option.
	アクション	Add the -x option while execute the tmloadcf command.
	関連項目	`tmloadcf`(1), `ubbconfig`(5)
8324	エラー: にはtmloadcfを実行する-xオプションを指定できません。
	説明	***** should not be executed with -x option.
	アクション	Remove the -x option while execute the tmloadcf command.
	関連項目	`tmloadcf`(1), `ubbconfig`(5)
8325	エラー: オプションが使用できないのはRESOURCESセクションにオプションが指定されていない場合です。*
	説明	***** should not be executed with -x option.
	アクション	The ${IDENTIFIER} option should be specified when the previously mentioned option is set.
	関連項目	`tmloadcf`(1), `ubbconfig`(5)
8326	エラー: オプションをRESOURCESセクションに設定する必要があります。*
	説明	Option ***** should be set in the RESOURCES section.
	アクション	Add the specific option in the RESROUCES section.
	関連項目	`tmloadcf`(1), `ubbconfig`(5)
8341	エラー: EXT_AAオプションが有効になっていません
	説明	The Tuxedo `OPTIONS` must be configured with `EXT_AA`.
	アクション	Correct the error in `TUXCONFIG` and then reboot the Tuxedo.
	関連項目	`OAUTHSVR`(5), `tmboot`(1), `tmshutdown`(1)
8342	ERROR: Authentication level must be USER_AUTH, ACL or MANDATORY_ACL.
	説明	The Tuxedo `SECURITY` must be configured with `USER_AUTH`, `ACL`, or `MANDATORY_ACL`.
	アクション	Correct the error in `TUXCONFIG` and then reboot the Tuxedo.
	関連項目	`OAUTHSVR`(5), `tmboot`(1), `tmshutdown`(1)
8347	エラー: デフォルトTuxedoリソース[%s : %s : %s]が保護されていません
	説明	Default resource is not defined as protected resource in OAM. OAM always require a resource to figure out the authentication level and policies to authenticate a user. Administrator need define a default resource.
	アクション	Define default protected resource in OAM.
	関連項目	`OAUTHSVR`(5)
8354	ERROR: Duplicate CACHING section present.
	説明	More than one CACHING section has been specified in the configuration file.
	アクション	Modify the configuration file so that only one CACHING section is specified.
	関連項目	`ubbconfig`(5)
8355	*エラー: GROUPSセクションはCACHINGセクションの前に宣言する必要があります*
	説明	The CACHING section has been defined before the GROUPS section in the configuration file.
	アクション	Edit the configuration file such that the RESOURCES, MACHINES, and GROUPS sections are the first three sections in that order.
	関連項目	code>ubbconfig(5)
8356	ERROR: Caching name must be <= 30 characters.
	説明	The `CACHING` identifier must be <= 30 characters.
	アクション	Specify a value that is less than or equal to 30 characters.
	関連項目	`ubbconfig`(5)
8357	*エラー: CACHINGエントリentry_nameのKEY_FIELDパラメータが無効です**
	説明	The `KEY_FIELD` list specified in an entry in the CACHING section of the UBBCONFIG file is invalid.
	アクション	Specify valid `KEY_FIELD` string, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8358	*ERROR: CACHING entry enrty_name* specifies an illegal KEY_BUFTYPE of ALL.**
	説明	The CACHING entry flagged in the error message has a `KEY_BUFTYPE` of `ALL`. This is not allowed.
	アクション	Specify a valid buffer type for the CACHING entry in error, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8359	*ERROR: The KEY_BUFTYPE parameter in CACHING entry entry_name* start with ','.**
	説明	The `KEY_BUFTYPE` list specified in an entry in the CACHING section of the UBBCONFIG file starts with a comma. This is not allowed.
	アクション	Ensure that at least one valid buffer type is specified in the `KEY_BUFTYPE` string, and make sure that the string does not begin with a comma. When the error has been fixed, reload the configuration file.
	関連項目	`ubbconfig`(5)
8360	*エラー: CACHINGエントリentry_nameに含まれる型名type_nameが長すぎます*
	説明	One of the buffer type names specified in the `KEY_BUFTYPE` parameter of CACHING entry of the UBBCONFIG file exceeds the maximum allowed length. The maximum allowed length of a buffer type name is 8 bytes.
	アクション	Change the buffer type name so that it is no longer than 8 bytes, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8361	*エラー: CACHINGエントリentry_nameに、nullバッファ・タイプ名が含まれています*
	説明	The `KEY_BUFTYPE` parameter specified in CACHING entry contains one or more null buffer type names.
	アクション	Change the `KEY_BUFTYPE` entry flagged as being in error. Make certain that the beginning of the `KEY_BUFTYPE` string specifies a valid buffer type identifier, and that the string does not start with a punctuation mark. Also, make sure that each semicolon in the `KEY_BUFTYPE` string is followed by a valid buffer type identifier. Reload the configuration file.
	関連項目	`ubbconfig`(5)
8362	*エラー: CACHINGエントリentry_nameに、予期しないカンマが含まれています*
	説明	The `KEY_BUFTYPE` parameter specified in CACHING section of the UBBCONFIG file contains an unexpected comma.
	アクション	Change the `KEY_BUFTYPE` entry flagged as being in error. The only places where commas are allowed to occur in `KEY_BUFTYPE` entries are between entries of a list of multiple subtypes of a particular type. When the error has been fixed, the configuration file should be reloaded.
	関連項目	`ubbconfig`(5)
8363	ERROR: CACAHING entry entry_name - only STRING, MBSTRING, CARRAY, VIEW, FML, X_OCTET, X_C_TYPE, X_COMMON,RECORD,or XML type is allowed in CACHING section.
	説明	The `KEY_BUFTYPE` parameter specified in CACHING entry contains invalid type name.
	アクション	Change the `KEY_BUFTYPE`, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8364	*エラー: CACHINGエントリentry_name* に含まれるサブタイプ名subtype_nameが長すぎます**
	説明	One of the buffer type names specified in the `KEY_BUFTYPE` parameter of CACHING section entry of the UBBCONFIG file exceeds the maximum allowed length. The maximum allowed length of a buffer subtype name is 16 bytes.
	アクション	Change the buffer subtype name so that it is no longer than 16 bytes, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8365	*エラー: CACHINGエントリentry_nameに、nullバッファ・サブタイプ名が含まれています*
	説明	One of the buffer subtype names specified in the `KEY_BUFTYPE` parameter of CACHING section entry of the UBBCONFIG file is null. This is not allowed.
	アクション	Change the buffer subtype name, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8366	*エラー: CACHINGエントリentry_nameに、''と特定のサブタイプ名の両方が指定されています**
	説明	A subtype list contained within the `KEY_BUFTYPE` parameter of a CACHING section entry of the UBBCONFIG file specified both the wild-card subtype "*" and a specific subtype name. This is not allowed.
	アクション	If the application should accept all subtype names, specify "" without specifying any specific subtype names. If the application should accept only specific subtype names, remove "" from the list of subtype names. When the change has been made, reload the configuration file.
	関連項目	`ubbconfig`(5)
8367	*エラー: CACHINGエントリentry_nameで''が指定されていますが、ここでは許可されていません*
	説明	The `KEY_BUFTYPE` parameter of a CACHING section entry of the UBBCONFIG file specified '*' as a buffer subtype. This is not allowed.
	アクション	If caching in a VIEW/VIEW32, specify the specific buffer type to be routed on. If routing on an `FML/FML32` buffer, no buffer subtypes are allowed. Reload the configuration file once it has been modified.
	関連項目	`ubbconfig`(5)
8368	エラー: CACHINGエントリentry_name>/var>には、VIEW、X_C_TYPE、RECORDおよびX_COMMONのサブタイプを指定する必要があります
	説明	One of buffer type type which is VIEW, VIEW32, X_C_TYPE, RECORD,or X_COMMON within the `KEY_BUTYPE` parameter of a CACHING section entry of the UBBCONFIG file doesn't have subtype.
	アクション	Specify subtype for buffer types of VIEW, VIEW32, X_C_TYPE, RECORD,and X_COMMON, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8369	エラー: CACHINGエントリentry_name>/var>に予期しないコロンまたはカンマが含まれています
	説明	The `KEY_BUFTYPE` parameter specified in an entry in the CACHING section of the UBBCONFIG file contains an unexpected colon or comma.
	アクション	Examine the `BUFTYPE` entry flagged as being in error to determine the exact problem. A colon may occur only between a name of a type and the name of the first acceptable subtype. A comma may occur only between names of subtypes. When the error has been corrected, reload the configuration file.
	関連項目	`ubbconfig`(5)
8370	*エラー: CACHINGエントリentry_nameに、重複したタイプ(type_name)/サブタイプ(subtype_name)のペアが含まれています*
	説明	The `KEY_BUFTYPE` parameter of a CACHING section entry in the UBBCONFIG file specified duplicate type/subtype pairs. (For types without any subtype specified, the `KEY_BUFTYPE` parameter specified duplicate type pairs.)
	アクション	Modify the `KEY_BUFTYPE` parameter so that the same type/subtype pair is not specified more than once. Reload the configuration file.
	関連項目	`ubbconfig`(5)
8371	*エラー: CACHINGエントリentry_nameのバッファ・タイプ/サブタイプが多すぎます*
	説明	The maximum number of type/subtype combinations that a service can accept was exceeded.
	アクション	This is a fixed limit that requires a recompiled Oracle TUXEDO system version to increase. Contact your Oracle TUXEDO system Technical Support. Other options are: Reduce the number of type/subtype combinations by using "*" for a subtype wildcard. Have the server process call `tptypes()` on its input buffer, and enforce its own rules concerning allowed buffer type/subtype combinations.
	関連項目	`ubbconfig`(5)
8372	*エラー: CACHINGエントリentry_name* - 重複するタイプ(type_name)/サブタイプ(subtype_name)が含まれています。**
	説明	The `KEY_BUFTYPE` parameter of a CACHING section entry in the UBBCONFIG file specified duplicate type/subtype pairs. (For types without any subtype specified, the `KEY_BUFTYPE` parameter specified duplicate type pairs.)
	アクション	Modify the `KEY_BUFTYPE` parameter so that the same type/subtype pair is not specified more than once. Reload the configuration file.
	関連項目	`ubbconfig`(5)
8373	ERROR: CACHENAME parameter in CACHING entry must be <= 78 characters.
	説明	The `CACHENAME` parameter in CACHING entry must be <= 78 characters.
	アクション	Specify a value that is less than or equal to 78 characters.
	関連項目	`ubbconfig`(5)
8374	ERROR: KEY_BUFTYPE parameter in CACHING entry must be <= 255 characters.
	説明	The `KEY_BUFTYPE` parameter must be <= 255 characters.
	アクション	Specify a value that is less than or equal to 255 characters.
	関連項目	`ubbconfig`(5)
8375	ERROR: KEY_FIELD parameter in CACHING entry must be <= 255 characters.
	説明	The `KEY_FIELD` parameter must be <= 255 characters.
	アクション	Specify a value that is less than or equal to 255 characters.
	関連項目	`ubbconfig`(5)
8376	ERROR: KEY parameter in CACHING entry must be <= 127 characters.
	説明	The `KEY` parameter must be <= 127 characters.
	アクション	Specify a value that is less than or equal to 255 characters.
	関連項目	`ubbconfig`(5)
8377	*WARN: CACHING entry entry_name* (for SERVICE service_name) is not defined in the CACHING section.**
	説明	The `CACHINGENTRY` parameter in one `SERVICE` entry is not defined in the `CACHING` section.
	アクション	Specify a valid `CACHINGENTRY`, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8379	*ERROR: The subtype in KEY_BUFTYPE of CACHING entry entry_name* should not contain semicolon, colon, comma, or asterisk characters.**
	説明	The `KEY_BUFTYPE` parameter of a CACHING entry of the UBBCONFIG file specified a subtype which contain semicolon, colon, comma, or asterisk characters. This is not allowed.
	アクション	Specify a valid value as the subtype, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8380	エラー: RM_ERR_THRESHOLDパラメータは0以上、1000以下である必要があります
	説明	RM_ERR_THRESHOLD specifies the times of XAERR_RMFAIL and XAERR_RMERR returned by xa_start()/xa_open(). If RM_ERR_THRESHOLD is set to non-zero value, Server Reconnect to RM feature is enabled. The Range is [0,1000].
	アクション	Specify a valid value, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8381	エラー: RM_ERR_INTERVALパラメータは1以上、32767以下である必要があります
	説明	RM_ERR_INTERVAL specifies the interval time for tuxedo server to try to connect the RM. If server reconnect to RM feature is enabled, the default value of RM_ERR_INTERVAL is 30s. the Range is [1,32767]
	アクション	Specify a valid value, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8382	警告: 機能RMのサーバーへの再接続が有効になっていません。
	説明	Feature RM reconnect to Server is not enabled, because RM_ERR_THRESHOLD is set as 0
	アクション	To enable Feature RM reconnect to Server, RM_ERR_THRESHOLD should be > 0 and <=1000.
	関連項目	`ubbconfig`(5)
8383	ERROR: The length of an XML field in KEY_FIELD parameter of a CACHING entry must be <= 30 characters.
	説明	The XML field in `KEY_FIELD` parameter of a CACHING entry must be <= 30 characters.
	アクション	Specify a valid value as the XML field, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8384	*ERROR:The field number in KEY_FIELD parameter of a CACHING entry entry_name* must be <= 8.**
	説明	The field number in `KEY_FIELD` parameter of a CACHING entry entry_name must be <= 8.
	アクション	Specify a valid value as the `KEY_FIELD`, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8385	*ERROR: The KEY_FIELD fields_name* for buffer types STRING, CARRAY, MBSTRING or X_OCTET must match the syntax[index1, index2].**
	説明	The field in `KEY_FIELD` parameter for buffer types STRING, CARRAY, MBSTRING or X_OCTET must match the syntax[index1, index2]. index1, index2 start from 1.
	アクション	Specify a valid value as the `KEY_FIELD`, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8386	*ERROR: The CACHING entry entry_name* specifies an invalid KEY_BUFTYPE parameter.**
	説明	There exists conflict between buffer types in `KEY_BUFTYPE` parameter of a CACHING entry, they can't have same fields.
	アクション	Specify a valid value as the `KEY_BUFTYPE`, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8387	*ERROR: The CACHING entry entry_name* specifies an invalid KEY_BUFTYPE parameter.**
	説明	A CACHING entry should not set subtype for CARRAY, X_OCTET, STRING, MBSTRING,FML, FML32 and XML.
	アクション	Specify a valid value as the `KEY_BUFTYPE`, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8388	*ERROR:The CACHING entry entry_name* specifies an invalid KEY_FIELD parameter.**
	説明	The `KEY_FIELD` in CACHING entry could not start or end with '+' character.
	アクション	Specify a valid value as the `KEY_FIELD`, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8389	*ERROR:The CACHING entry entry_name* specifies an invalid KEY_FIELD parameter.**
	説明	The `KEY_FIELD` in CACHING entry, could not contain a null field.
	アクション	Specify a valid value as the `KEY_FIELD`, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8390	*ERROR:The CACHING entry entry_name* specifies an invalid KEY parameter.**
	説明	The format for `KEY` in CACHING entry, must be [mykey1][_$request_][mykey2], and the separator is '_' character.
	アクション	Specify a valid value as the `KEY`, and reload the configuration file.
	関連項目	`ubbconfig`(5)
8391	*ERROR:The CACHING entry entry_name* specifies an invalid KEY_FIELD parameter.**
	説明	The `KEY_FIELD`parameter is invalid in a CACHING entry. The syntax [index1, index2] field is only for STRING, MBSTRING,CARRAY or X_OCTET.
	アクション	Specify a valid value as the `KEY_FIELD`, and reload the configuration file.
	関連項目	`ubbconfig`(5)