|
3900
|
バイパス・ドメイン機能で切り替えずにTHROUGHGATEWAYを指定できません |
|
説明
|
The dmloadcf (1) utility detected an error while processing the DMCONFIG file. The THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section can not be set to Y without enablng bypass domain feature.
|
アクション
|
Modify the DMCONFIG file to remove THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf (1) or enable bypass domain feature.
|
関連項目
|
dmconfig (5)
|
3901
|
エラー: バイパス・ドメイン機能で切り替えずにTHROUGHGATEWAYを指定できません |
|
説明
|
The dmloadcf (1) utility detected an error while processing the DMCONFIG file. The THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section can not be set to Y without enable bypass domain feature.
|
アクション
|
Modify the DMCONFIG file to remove THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf (1) or enable bypass domain feature.
|
関連項目
|
dmconfig(5)
|
3903
|
エラー: THROUGHGATEWAY <string>が不明です。Y/y/N/nのみが許可されます。 |
|
説明
|
The value of THROUGHGATEWAY in DM_LOCAL_DOMAINS section is not a valid value. Only Y/y/N/n is allowed.
|
アクション
|
Modify the DMCONFIG file to specify valid value (Y/y/N/n) for THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf (1)
|
関連項目
|
dmconfig(5)
|
3904
|
バイパス・ドメイン機能で切り替えずにTHROUGHGATEWAYを指定できません |
|
説明
|
The dmloadcf (1) utility detected an error while processing the DMCONFIG file. The THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section can not be set to Y without enabling bypass domain feature.
|
アクション
|
Modify the DMCONFIG file to remove THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf (1) or enable bypass domain feature.
|
関連項目
|
dmconfig (5)
|
3905
|
エラー: バイパス・ドメイン機能で切り替えずにTHROUGHGATEWAYを指定できません |
|
説明
|
The dmloadcf (1) utility detected an error while processing the DMCONFIG file. The THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section can not be set to Y without enabling bypass domain feature.
|
アクション
|
Modify the DMCONFIG file to remove THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf (1) or enable bypass domain feature.
|
関連項目
|
dmconfig (5)
|
3907
|
エラー: THROUGHGATEWAY <string>が不明です。Y/y/N/nのみが許可されます。 |
|
説明
|
The value of THROUGHGATEWAY in DM_LOCAL_DOMAINS section is not a valid value. Only Y/y/N/n is allowed.
|
アクション
|
Modify the DMCONFIG file to specify valid value (Y/y/N/n) for THROUGHGATEWAY parameter in the DM_LOCAL_DOMAINS section and rerun dmloadcf (1)
|
関連項目
|
dmconfig (5)
|
3913
|
エラー: GWADMはBYPASSDOM_SHARED_DIRへのアクセス権限を取得していません。 |
|
説明
|
When BYPASS DOMAIN feature is enabled, GWADM must have full access permissions (read, write and execute) to the directory specified by BYPASSDOM_SHARED_DIR.
|
アクション
|
Change the directory access permissions to read, write and execute.
|
関連項目
|
tmloadcf (1), UBBCONFIG (5)
|
3914
|
ERROR: No services have been resumed because none were offered by connected remote domains
|
|
説明
|
When the GW_RESUME_CONN_ONLY=y environment variable is set, the behavior of the dmadmin(1) resume subcommand is modified so that a service is resumed only if a connection to the remote domain offering the service is active.
The dmadmin subcommand resume -all found that none of the remote services handled by the specified local domain were offered by connected remote domains, so no services were resumed.
|
アクション
|
The dmadmin subcommand printdomain -d local_domain_name can be used to show the status of connections from this domain.
Contact the remote domain administrators to verify that these domains are active and/or resolve any network issues that are preventing the domains from connecting.
Depending on the connection policy specified, rebooting a remote domain may or may not cause there services offered by that domain to be automatically advertised. If needed, rerun the dmadmin resume -all subcommand after remote domain connections are restored.
|
関連項目
|
dmadmin (1)
|
3915
|
WARN: Only services offered by connected remote domains have been resumed
|
|
説明
|
When the GW_RESUME_CONN_ONLY=y environment variable is set, the behavior of the dmadmin(1) resume subcommand is modified so that a service is resumed only if a connection to the remote domain offering the service is active.
The dmadmin subcommand resume -all found that only some of the remote services handled by the specified local domain were offered by connected remote domains, and only those services were resumed.
|
アクション
|
The dmadmin subcommand printdomain -d local_domain_name can be used to show the status of connections from this domain.
Contact the remote domain administrators to verify that these domains are active and/or resolve any network issues that are preventing the domains from connecting.
Depending on the connection policy specified, rebooting a remote domain may or may not cause there services offered by that domain to be automatically advertised. If needed, rerun the dmadmin resume -all subcommand after remote domain connections are restored.
|
関連項目
|
dmadmin (1)
|
3916
|
ERROR: Service has not been resumed because domain domainname is not currently connected
|
|
説明
|
When the GW_RESUME_CONN_ONLY=y environment variable is set, the behavior of the dmadmin(1) resume subcommand is modified so that a service is resumed only if a connection to the remote domain offering the service is active.
The dmadmin subcommand resume subcommand found that the specified service was not associated with a connected remote domain, so the service was not resumed.
|
アクション
|
The dmadmin subcommand printdomain -d local_domain_name can be used to show the status of connections from this domain.
Contact the remote domain administrators to verify that these domains are active and/or resolve any network issues that are preventing the domains from connecting.
Depending on the connection policy specified, rebooting a remote domain may or may not cause there services offered by that domain to be automatically advertised. If needed, rerun the dmadmin resume subcommand after remote domain connections are restored.
|
関連項目
|
dmadmin (1)
|
3917
|
警告: 統計レコードを記録する統計ファイルstatistics_file_nameを作成できません
|
|
説明
|
When turn on domain statistics trace log, the statistics file cannot created.
The GWADM found that the specified statistics file can not be created with a curently file name.
|
アクション
|
The GWADM dose not write the statistics trace log from this domain.
|
関連項目
|
GWADM
|
3918
|
警告: 統計ファイルstatistics_file_nameに書き込めません
|
|
説明
|
When turn on domain statistics trace log, can not write the the statistics trace log to the statistics file.
The GWADM found that the can not write the statistics trace log specified statistics file.
|
アクション
|
The GWADM dose not write the statistics trace log from this domain.
|
関連項目
|
GWADM
|
3919
|
エラー: TLSversiontls_versionが不明です。TLSv1.2/TLSv1.1/TLSv1.0のみ許可されます
|
|
説明
|
Tuxedo only support TLS version 1.2, 1.1 and 1.0 now. any other version not allowed.
|
アクション
|
The GWTDOMAIN supported TLS version 1.2, 1.1 and 1.0 in Tuxedo where network communication happened. any other TLS version not allowed, and GWTDOMAIN will close the network communication.
|
関連項目
|
GWTDOMAIN
|
3920
|
エラー: STATISTICSLOG_PFXは絶対パス名で始める必要があります
|
|
説明
|
The value of STATISTICSLOG_PFX must be an absolute pathname.
|
アクション
|
The problem may be that of a missing file, or incorrect permissions to the file or to a directory in the pathname of the file. Correct the problem.
|
関連項目
|
dmconfig(5)
|
3921
|
statsvc (statsvc) -d local_domain_access_point_name -t interval_time_number
|
|
説明
|
The dmadmin(1) statsvc subcommand is modified the interval number of domain statistics trace log.
|
アクション
|
The dmadmin subcommand statsvc -d local_domain_access_point_name -t interval_time_number can be used to modify the interval of write the statistics log to statistics log file.
|
関連項目
|
dmadmin (1)
|
3922
|
リモート・サービス・コールで指定されたローカル・ドメイン・アクセス・ポイントの統計監査トレースをアクティブ化(on)するか非アクティブ化(off)します。
|
|
説明
|
The STATISTICS_INTERVAL is set by the dmadmin(1) statsvc subcommand. When the value of STATISTICS_INTERVAL is large than 0, activates (on) the statistics audit trace for the named local domain access point with remote service call. otherwise deactivates (off) it.
|
アクション
|
Activates (on) the statistics audit trace for the named local domain access point with remote service call. The GWADM will write the statistics audit trace log to the STATISTICSLOG_PFX file. otherwise deactivates (off) it.
|
関連項目
|
3921
|
3923
|
開始された統計の間隔は%d秒です。
|
|
説明
|
The STATISTICS_INTERVAL is set by the dmadmin(1) statsvc subcommand. When the value of STATISTICS_INTERVAL is large than 0, the GWADM will start to write the statisctics trace log to STATISTICSLOG_PFX with seconds.
|
アクション
|
The dmadmin subcommand statsvc can be used to modify the interval of write the statistics audit trace log from this domain.
|
関連項目
|
dmadmin (1)
|
3924
|
エラー: 新しいSTATISTICS_INTERVALが%dから%dの範囲に収まっていません |
|
説明
|
The STATISTICS_INTERVAL is set by the dmadmin(1) statsvc subcommand. the range of STATISTICS_INTERVAL is large than or equal to 0, and less than 32767 second.
|
アクション
|
The STATISTICS_INTERVAL should be in the range:0-32767
|
関連項目
|
dmadmin (1)
|