システム・メッセージ: LIBTUXカタログ6800-6899
|
6800 |
WARN: rule not supported rule | |
|
説明 |
The rule is not supported by this machine. |
アクション |
Please upgrade this Tuxedo version or install the new rolling patch. | |
6801 |
ERROR: Line lineno, bad section type | |
|
説明 |
The section type is invalid. |
アクション |
Contact Oracle Customer Support. | |
6802 |
ERROR: Line lineno, bad message severity | |
|
説明 |
The event action message severity is invalid. |
アクション |
Please check the line event message severity, the valid values are: Information, Warn, Critical and Fatal. | |
関連項目 |
See TSAM Plug-in Event User Guide | |
6803 |
エラー: パラメータ・ファイルは存在します | |
|
説明 |
ルール・ファイルが存在します。 |
アクション |
ファイルを削除するか、名前を変更してください。 | |
6804 |
エラー: 書き込むためにオープンできません | |
|
説明 |
書込みのためにルール・ファイルをオープンできません。 |
アクション |
ディレクトリまたはファイル名が正しく、書込み権限があるかどうかを確認してください。 | |
6805 |
エラー: パラメータ・ファイルにstatを実行できません | |
|
説明 |
パラメータ・ファイルから情報を取得できません。 |
アクション |
ディレクトリまたはファイル名が正しく、アクセス権があるかどうかを確認してください。 | |
6806 |
エラー: バッファ・サイズが小さすぎます | |
|
説明 |
掲示板にルールを保持するための十分な領域がありません。 |
アクション |
構成に応じてUBBCONFIGのMAXSPDATAの値を増やしてください。 | |
関連項目 |
TSAMプラグイン・イベント・ユーザー・ガイドを参照してください。 | |
6807 |
WARN: Line lineno, duplicated rule rule, use new one | |
|
説明 |
The global or report policy is repetitious. |
アクション |
Delete the repetitious rule. | |
6808 |
WARN: Line lineno, duplicated rule, ignore it | |
|
説明 |
The service,call path or BBL rule is repetitious. |
アクション |
Delete the repetitious rule. | |
6809 |
ERROR: The buffer size is too small, the required size is bufsize | |
|
説明 |
There is no enough space in bulletin board to hold the rules. |
アクション |
Please increase MAXSPDATA in UBBCONFIG according to your configuration. | |
関連項目 |
See TSAM Plug-in Event User Guide | |
6810 |
エラー: メモリー割当てエラー | |
|
説明 |
オペレーティング・システムから動的にメモリーを割り当てようとしましたが失敗しました。 |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
6811 |
エラー: トリガー・ルールに対してmutexをロックできませんでした | |
|
説明 |
TSAMプラグイン・イベント・トリガー・プロセスでmutexのロックに対して内部エラーが発生しました。 |
アクション |
Oracleカスタマ・サポートに連絡してください。 | |
6812 |
エラー: イベント・アクション処理で失敗したFML32バッファを割当てできませんでした | |
|
説明 |
TSAMプラグイン・イベント・トリガー・プロセスでTuxedo FML32型付きバッファを割り当てようとしましたが、失敗しました。 |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。この問題が解決しない場合は、Oracleカスタマ・サポートに連絡してください。 | |
6813 |
エラー: イベント・アクション処理で失敗したFML32バッファを再割当てできませんでした | |
|
説明 |
TSAMプラグイン・イベント・トリガー・プロセスでTuxedo FML32型付きバッファを再割当てしようとしましたが、失敗しました。 |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。この問題が解決しない場合は、Oracleカスタマ・サポートに連絡してください。 | |
6814 |
ERROR: Fcpy32 returns error(number) in event action handling | |
|
説明 |
TSMA PLug-in event trigger process failed to invoke Fcpy32 routine. |
アクション |
Contact Oracle Customer Support. | |
6815 |
ERROR: Fchg32 returns error(number) in event action handling | |
|
説明 |
TSMA PLug-in event trigger process failed to invoke Fchg32 routine. |
アクション |
Contact Oracle Customer Support. | |
6816 |
ERROR: tppost returns error(number) in event action handling | |
|
説明 |
TSMA PLug-in event trigger process failed to invoke tppost routine when post an event to Tuxedo Event Broker. |
アクション |
The most likely reason is Tuxedo Event Broker is not configured in your Tuxedo domain but the destination of the event is specified to "eventbroker" in the trigger rules file. Setup TMUSREVT server in UBBCONFIG. | |
関連項目 |
See Manual of TMUSREVT(5). | |
6817 |
ERROR: Line lineno, bad destination | |
|
説明 |
The action destination is invalid. |
アクション |
Please check the event action destination. The valid values are: 'eventbroker' or 'tsammanager'. | |
関連項目 |
See TSAM Plug-in Event User Guide | |
6818 |
ERROR: Line lineno, event name is too long | |
|
説明 |
The event name is too long. |
アクション |
The maximum length of event name is 31. | |
6819 |
ERROR: Line lineno, field_name cannot exist in the rule rule_section section | |
|
説明 |
The field can not be configured in the rule section. |
アクション |
Please check if the keyword is in a suitable rule section. We support different keywords for different rule section. Please reference TSAM Plug-in Event User Guide for detail. | |
関連項目 |
See TSAM Plug-in Event User Guide | |
6820 |
ERROR: A workstation client(ip address address) does not have a proper application password | |
|
説明 |
The application password authentication was failed for a workstation client. |
アクション |
Check ULOG and find the ip address. Then make sure the client on this address has a correct application password if the security level is APP_PW or above. | |
6821 |
ERROR: xa_rollback returned error for group groupname | |
|
説明 |
This message is issued when Oracle TUXEDO tries unsuccessfully to rollback a transaction via xa_rollback() after receiving a reply. The message prints the error code that the function returned. |
アクション |
Contact your Oracle TUXEDO system Technical Support or your database system vendor. See the userlog for more information on the outcome of the transaction. Also, use tmadmin's printtrans command to find out more information about the transaction. | |
6822 |
ERROR: xa_rollback returned errcode for group groupname | |
|
説明 |
This message is issued if a process attempting to commit a transaction could not unlock the bulletin board. It then attempted to roll back the transaction, and encountered an error when calling the database resource manager's |
アクション |
Contact your Oracle TUXEDO system Technical Support or your database system vendor. The database system documentation or error logs may contain more information about why | |
6823 |
エラー: TSAM SDKライセンスにはTuxedo SDKライセンスが必要です | |
|
説明 |
TSAM SDKライセンスを使用するTuxedo SDKライセンスがないため、TSAMライセンスのチェックに失敗しました。 |
アクション |
TSAM SDKライセンスには有効なTuxedo SDKライセンスが必要です。Oracleサポートに連絡してTuxedo SDKライセンスを入手してください。 | |
6824 |
エラー: TSAMのライセンスがありません | |
|
説明 |
TSAMのライセンスがありませんが、TSAMの機能が使用されています。 |
アクション |
TSAMは、個別のライセンスが必要な製品です。Oracleサポートに連絡してTSAMライセンスを入手してください。 | |
6825 |
エラー: TSAMライセンスの期限が切れています | |
|
説明 |
TSAMライセンス日付の期限が切れています。 |
アクション |
Oracleサポートに連絡してTSAMライセンスを更新してください。 | |
6826 |
INFO: TSAM License Serial #: serial, Expiration date | |
|
説明 |
TSAM License information. |
アクション |
None. | |
6827 |
INFO: TSAM Licensed to : owner | |
|
説明 |
TSAM License owner information. |
アクション |
None. | |
6828 |
ERROR: Field name not found for id fieldid | |
|
説明 |
While doing service contract discovery, discovery process parses the FML buffer to get buffer field contract detail information when buffer type is FML or FML32. The operation tries to get FML/FML32 field name using the buffer field identifier. Upon the operation failure, this message is displayed. |
アクション |
Make sure FML/FML32 required environment variables are set correctly for the server that enabled service contract discovery. | |
6829 |
ERROR: Call .SCD failed with error val | |
|
説明 |
Service contract discovery module failure. Cannot send contract information to TMMETADATA server. |
アクション |
Make sure TMMETADATA server is configured correclty in UBBCONFIG. If TMMETADATA is in "readonly" mode, "-o" must be specified for the output text file. | |
関連項目 |
| |
6830 |
警告: SCA管理スレッドの作成中にエラーが発生しました。SCA管理スレッドなしで開始します。 | |
|
説明 |
通常SCAサーバーでscaadmin統計リクエストの処理に使用されるSCA管理スレッドで使用するためのmutexまたはcondition変数を作成しようとして、エラーが発生しました。 このため、サーバーで現在実行されている他の操作がある場合は、scaadmin統計リクエストの処理が遅延します。 |
アクション |
サーバーを再起動して、問題が引き続き発生するかどうかを確認してください。問題が解決しない場合は、Oracleサポートに連絡してください。 | |
6831 |
警告: SCA管理スレッドの作成に失敗しました。SCA管理スレッドなしで開始します。 | |
|
説明 |
通常SCAサーバーでのscaadmin統計リクエストの処理に使用されるSCA管理スレッドの作成中に、スレッド作成エラーが発生しました。 このため、サーバーで現在実行されている他の操作がある場合は、scaadmin統計リクエストの処理が遅延します。 |
アクション |
サーバーを再起動して、問題が引き続き発生するかどうかを確認してください。オペレーティング・システムを確認して、システムに十分なスレッド・リソースがあるかどうかを確認してください。問題が解決しない場合は、Oracleサポートに連絡してください。 | |
6832 |
警告: SCAサーバーが非スレッドのプラットフォーム上で実行しています。 | |
|
説明 |
このハードウェア・プラットフォームではマルチスレッド機能がサポートされていないため、このSCAサーバーが、通常scaadmin統計リクエストの処理に使用される管理スレッドを作成できませんでした。 このため、サーバーで現在実行されている他の操作がある場合は、scaadmin統計リクエストの処理が遅延します。 |
アクション |
アクションは不要です。 | |
6833 |
ERROR: Workstation client(ip address address) does not have proper application password | |
|
説明 |
Workstation client is using wrong application password. |
アクション |
Use correct application password in workstation client. | |
6834 |
ERROR: Workstation client(ip address address) authentication failure | |
|
説明 |
Workstation client authentication failure. |
アクション |
Check the tuxedo application security setting and ensure workstation client is compliant. | |
6835 |
ERROR: Service servicename in BEGIN session role is forwarding request | |
|
説明 |
Service in BEGIN session role is forwarding a request |
アクション |
Do not use tpforward in services where SESSIOROLE is set to BEGIN | |
6836 |
ERROR: Service servicename in END session role is forwarding request | |
|
説明 |
Service in END session role is forwarding a request |
アクション |
Do not use tpforward in services where SESSIOROLE is set to END | |
6837 |
ERROR: Service servicename in BEGIN session role cannot be invoked with TPNOREPLY flag | |
|
説明 |
Service in BEGIN session role cannot be invoked with TPNOREPLY flag |
アクション |
Do not call services where SESSIONROLE is set to BEGIN with TPNOREPLY flag if you want to use Client/Server affinity feature correctly. | |
6838 |
ERROR: Service servicename in END session role cannot be invoked with TPNOREPLY flag | |
|
説明 |
Service in END session role cannot be invoked with TPNOREPLY flag |
アクション |
Do not call services where SESSIONROLE is set to END with TPNOREPLY flag if you want to use Client/Server affinity feature correctly. | |
6839 |
ERROR: Service servicename in BEGIN session role in conversation server | |
|
説明 |
Service in BEGIN session role is advertised by conversation server |
アクション |
Do not allow services on the conversation server to be set with BEGIN session role. | |
6840 |
ERROR: Service servicename in END session role in conversation server | |
|
説明 |
Service in END session role is advertised by conversation server |
アクション |
Do not allow services on the conversation server to be set with END session role. | |
6841 |
ERROR: Install Oracle TSAM before enabling TM_RQSTLIVETIME. | |
|
説明 |
To enable the Clean Stale Request feature, Oracle TSAM must be installed first |
アクション |
Purchase Oracle TSAM and install. | |
6842 |
INFO: Message request dropped. In queue longer than times* SCANUNIT, as specified by TM_RQSTLIVETIME. | |
|
説明 |
A stale message request is dropped. |
アクション |
None. | |
6843 |
ERROR: File filename specified in TM_RQSTLIVETIME cannot be opened. | |
|
説明 |
File specified in TM_RQSTLIVETIME cannot be found or is unreadable. |
アクション |
Specify a valid file (under $APPDIR) in TM_RQSTLIVETIME.
Lines in this file must use the format: | |
6844 |
ERROR: [Unable to find | |
|
説明 |
|
アクション |
Verify that the environment variable | |
関連項目 |
| |
6845 |
ERROR: Unable to read the | |
|
説明 |
|
アクション |
Verify that the environment variable | |
関連項目 |
| |
6846 |
ERROR: Resource manager identifier rmid of group groupname error. | |
|
説明 |
The |
アクション |
Make sure the | |
関連項目 |
| |
6847 |
ERROR: Resource manager identifier rmid xa switch is not set. | |
|
説明 |
The required xa switch symbol specified by rmid in the |
アクション |
Make sure the resource manager name is correct and consistent with the name in the | |
関連項目 |
| |
6848 |
ERROR: Resource manager identifier rmid xa switch is not supported. | |
|
説明 |
It is not allowed to configure an old preliminary version of XA resource manager in |
アクション |
Delete the item which specifies an old preliminary version of XA resource manager. | |
関連項目 |
| |
6850 |
ERROR: tprmopen TPERMERR xa_open for resource manager rmid returned errstring | |
|
説明 |
The call to |
アクション |
Look for | |
関連項目 |
| |
6851 |
エラー: TUXCONFIGファイルの*RMSセクションを読み取れません。 | |
|
説明 |
|
アクション |
Tuxedoの実行中にTUXCONFIGファイルまたはTuxedo共有メモリーが誤って削除されなかったことを検証してください。このエラーが常に発生する場合は、Oracleサポートに連絡してください。 | |
関連項目 |
| |
6852 |
ERROR: tprmclose resource manager rmid TPERMERR xa_close returned errstring. | |
|
説明 |
The call to |
アクション |
Look for | |
関連項目 |
| |
6853 |
ERROR: tprmstart resource manager rmid xa_start returned errstring | |
|
説明 |
The call to |
アクション |
Look for | |
関連項目 |
| |
6854 |
エラー: 進行中のトランザクションでtprmcloseが呼び出されました | |
|
説明 |
|
アクション |
| |
関連項目 |
| |
6856 |
ERROR: Cannot find xa switch symbol with specific resource manager name in OPENINFO string. | |
|
説明 |
The resource names specified in |
アクション |
Make sure all the required resource manager symbols are imported while executing | |
関連項目 |
| |
6857 |
ERROR: FML32 field name fieldname specified for routing criteria routingname has field type typenum which exceeds the allowed maximum of maxtypenum | |
|
説明 |
FML32 field fieldname was specified for routing entry routingname, but this field has type typenum which is greater than the maximum allowable type number maxtypenum, which is currently equal to 7. |
アクション |
Specify a routing field with a valid type. The only FML32 types currently allowed for routing are short (0), long (1), char (2), float (3), double (4), string (5), and carray (6). | |
関連項目 |
| |
6858 |
ERROR: FML32 field name fieldname specified for routing criteria routingname has field number fldnum which exceeds the allowed maximum of maxroutefldnum | |
|
説明 |
FML32 field fieldname was specified for routing entry routingname, but this field has number fldnum which is greater than the maximum allowable routing field number maxroutefldnum, which is currently equal to 8191. |
アクション |
Specify a routing field with a field number less than or equal to 8191. | |
関連項目 |
| |
6867 |
エラー: TLOGがデータベースに格納されている場合、TLOGNAMEを指定する必要があります | |
|
説明 |
データベースにtlogを書き込む場合は、データベースでの競合を避けるために |
アクション |
| |
関連項目 |
| |
6868 |
ERROR: action met a database error:errmsg | |
|
説明 |
You met a database error :errmsg when tuxedo write/read tlog infomation from database. |
アクション |
Contact your DBA according to the error message. | |
6869 |
WARN: TM_ENVFILE_BEFOREBOOT doesn't taken effect for servername. | |
|
説明 |
Environment variable "TM_ENVFILE_BEFOREBOOT" doesn't taken effect for this server. |
アクション |
None. | |
6870 |
WARNING: Could not load OCI library. Library name is longer than the allowed length. | |
|
説明 |
Failed to load OCI library dynamically. |
アクション |
Check the user OCI library name specified by the user. Make sure the lenth of OCI library name is no longer than 255. | |
6871 |
WARNING: Could not load OCI library. oci_generic_init failed. | |
|
説明 |
Failed to load OCI library dynamically. |
アクション |
Check the user OCI library name specified by the user. Make sure that the OCI library can be accessed successfully. | |
6872 |
WARNING: Could not create OCI environment. _OCIEnvCreate failed with errcode = %d. | |
|
説明 |
Failed to setup the OCI environment for ECID propagation from Oracle Tuxedo to Oracle DB. |
アクション |
Make sure that the environment variables for OCI have been set correctly. If the problem persists, contact Oracle Customer Support. | |
6873 |
WARNING: Could not register OCI roundtrip callback. Status = %d. | |
|
説明 |
Failed to setup the OCI environment for ECID propagation from Oracle Tuxedo to Oracle DB. |
アクション |
Check the version of OCI library. Make sure that the OCI library supports the OCI roundtrip callback feature. | |
6874 |
WARNING: Could not register OCI roundtrip callback context. Status = %d. | |
|
説明 |
Failed to setup the OCI environment for ECID propagation from Oracle Tuxedo to Oracle DB. |
アクション |
Check the version of OCI library. Make sure that the OCI library supports the OCI roundtrip callback feature. | |
6875 |
ERROR: Could not load DMS library libname, err = code. | |
|
説明 |
Failed to load DMS library libname dynamically, receive error 'code'. |
アクション |
Check the Oracle Tuxedo installation. If the installation is fine but problem persists, contact Oracle Customer Support. | |
6876 |
ERROR: Could not get DMS library function funname, err = code. | |
|
説明 |
The process received the error 'code' while trying to read the DMS function funname from the DMS library. |
アクション |
Check the Oracle Tuxedo installation. If the installation is fine but problem persists, contact Oracle Customer Support. | |
6877 |
ERROR: nzos_SetThrUse returned error error_number [error_string] | |
|
説明 |
An error occurred while setting up the Oracle NZ security layer to operate in multithreaded mode. The error returned by the Oracle NZ security layer was error_number and a text description of that error is error_string. |
アクション |
Verify that the application is not linked with a different version of the Oracle security layers than the version provided with Tuxedo. If the problem persists, contact Oracle customer support. | |
6878 |
ERROR: nzos_SetSqlnetFunc returned error error_number [error_string] | |
|
説明 |
An error occurred while setting up callback functions for the Oracle NZ security layer. The error returned by the Oracle NZ security layer was error_number and a text description of that error is error_string. |
アクション |
Verify that the application is not linked with a different version of the Oracle security layers than the version provided with Tuxedo. If the problem persists, contact Oracle customer support. | |
6879 |
ERROR: NZ Toolkit initialization returned error error_number [error_string] | |
|
説明 |
An error occurred while initializing the Oracle NZ security layer. The error returned by the Oracle NZ security layer was error_number and a text description of that error is error_string. |
アクション |
Verify that the application is not linked with a different version of the Oracle security layers than the version provided with Tuxedo. If the problem persists, contact Oracle customer support. | |
6880 |
エラー: SEC_PRINCIPAL_LOCATIONが設定されていません | |
|
説明 |
SSL接続のサーバー側のプロセスまたは相互認証を使用したSSL接続のクライアント側のプロセスは、SSL接続の相手側が検証するセキュリティ資格証明を提供する必要があります。 セキュリティ資格証明にOracle Walletが使用されている場合は、SEC_PRINCIPAL_LOCATIONを使用してウォレットの位置を指定します。従来のセキュリティ資格証明が使用されている場合は、SEC_PRINCIPAL_LOCATIONで秘密鍵の位置を指定します。 SEC_PRINCIPAL_PASSVARパラメータは、SEC_PRINCIPAL_LOCATIONをオープンするために必要なパスワードを含む環境変数の名前を指定します。(掲示板にアタッチされていないプロセスでは、これに相当するパスワードを含む環境変数はSEC_PRINCIPAL_PASSWORDです。) |
アクション |
TUXCONFIGファイルのSEC_PRINCIPAL_LOCATIONおよびSEC_PRINCIPA_PASSVARパラメータを適切な値に設定してください。 | |
6881 |
ERROR: Cannot stat Oracle Wallet \"wallet_loc\" | |
|
説明 |
The |
アクション |
Ensure that permissions allow searching all directories above wallet_loc and taht there is not a looping symbolic link in the wallet_loc path. | |
6882 |
エラー: Oracle Wallet \"wallet_loc\"をオープンできません。エラーerror_number [error_string] | |
|
説明 |
Tuxedo was unable to open the Oracle Wallet located in directory wallet_loc. The error returned by the Oracle NZ security library was error_number and a text description of that error is error_string. |
アクション |
Ensure that the wallet_loc directory exists, that it contains an | |
6883 |
ERROR: nzosSetCredential returned error error_number [error_string] | |
|
説明 |
The function used to set SSL security credentials in the Oracle NZ security layer failed. The error returned by the Oracle NZ security layer was error_number and a text description of that error is error_string. |
アクション |
Examine the error returned by the Oracle NZ security layer for information about the cause of the error. Ensure that the Oracle Wallet contains all credentials needed by the application. For example, if the process is on the server side of the SSL connection, ensure that the Oracle Wallet contains a private key and a certificate. | |
6884 |
ERROR: No supported cipher suites found. Please check the configured minimum bits = minbits and maximum bits = maxbits | |
|
説明 |
No supported SSL cipher suites with a strengh of between minbits and maxbits were found. |
アクション |
Change the values of minbits and maxbits. Remember that 0 bit SSL cipher suites (which do not actually use any encryption) are not allowed in Tuxedo 12c and above. | |
6885 |
"ERROR: SSL Handshake failed with error error_number [error_string] | |
|
説明 |
An error occurred during the SSL handshake process and this process was unable to establish an SSL connection. The error returned by the Oracle NZ security layer was error_number and a text description of that error is error_string. |
アクション |
If the problem occurs repeatedly, setting the environment variable |