システム・メッセージ: Qカタログ1100-1199


1100	ERROR: Invalid option - option
	Description	An invalid option, option, was specified on the `qmadmin` command line.
	Action	Select the appropriate option(s) from the usage line that follows the error message.
	See Also	`qmadmin`(1)
1101	ERROR: QMCONFIG not set
	Description	The value of QMCONFIG, the device containing the queue space, was not specified on the qmadmin command line or in the shell environment.
	Action	The QMCONFIG environment variable must be set and exported or must be specified on the qmadmin command line.
	See Also	`qmadmin`(1)
1102	ERROR: Invalid argument arg
	Description	An invalid argument, arg, was specified on the qmadmin command line following the QMCONFIG value.
	Action	Select the appropriate command line option(s) and argument from the usage line that follows the error message.
	See Also	`qmadmin`(1)
1104	ERROR: Failed to get status of qmconfig_device
	Description	qmadmin was unable to get the status of the device, qmconfig_device, specified for QMCONFIG.
	Action	Check that QMCONFIG is properly set to a raw disk slice or a regular file accessible to qmadmin, or to a file name to be created in an existing directory.
	See Also	`qmadmin`(1)
1105	ERROR: Effective user id, userid, must match the owner of QMCONFIG, qmconfig_userid
	Description	qmadmin was run by a user whose effective user identifier, userid, is not the same as the owner of the device specified for QMCONFIG, qmconfig_userid.
	Action	Change the ownership of the QMCONFIG device or file, or run the program as the corresponding user.
	See Also	`qmadmin`(1)
1107	ERROR: Must have white space following quoted string
	Description	While entering a qmadmin command, a double quoted string was entered without white space, spaces and/or tabs, preceding and following the string.
	Action	Re-enter the command line surrounding any quoted strings with white space (spaces and/or tabs).
	See Also	`qmadmin`(1)
1108	ERROR: No matching double quote
	Description	While entering a qmadmin command, a double quoted string was started without a matching quote to terminate the string.
	Action	Re-enter the command line with matching double quotes.
	See Also	`qmadmin`(1)
1109	ERROR: Failed to execute command, errno = errno
	Description	A shell command, command, was specified for execution using the qmadmin exclamation mark (!) command, but the shell command failed to execute. The error number, errno, is printed as part of the message.
	Action	Check that the PATH environment variable is set appropriately and that the shell command to be executed exists, and re-enter the command.
	See Also	`qmadmin`(1)
1110	エラー: 構文 -
	説明	qmadminコマンドに対して無効なオプションまたは引数が入力されました。正しい構文がメッセージ内にsyntaxとして出力されます。
	アクション	正しい構文でコマンドを再入力してください。
	関連項目	`qmadmin`(1)
1111	*ERROR: Command command* not found**
	Description	A command, command, was entered that does not exist in qmadmin.
	Action	Use the help command to get a list of valid qmadmin commands.
	See Also	`qmadmin`(1)
1120	ERROR: Queue space must be opened first
	Description	A qmadmin command was executed before a queue space was opened. This can happen with the queue commands qcreate, qchangeprio, qchangequeue, qchangetime, qdeletemsg, qdestroy, qinfo, qlist, qprinttrans, qaborttrans, qcommittrans, and qset.
	Action	Open a queue space using the qopen command and re-enter the command.
	See Also	`qmadmin`(1)
1121	WARN: xa_close() returned rc
	Description	The xa_close() function was called to close the currently open queue space as part of executing a qmadmin command (qaddext, qclose, qopen, qspacecreate, qspacedestroy, or quit) and it returned an error, rc.
	Action	Further information about the cause of the failure should be printed in the userlog. Check the userlog for further information.
	See Also	`qmadmin`(1)
1122	ERROR: Queue name must be set with qset
	Description	A qmadmin command (qchangeprio, qchangequeue, qchangetime, qdeletemsg, or qlist) was executed without setting the target queue name using the qset command.
	Action	Execute the qinfo command to get a list of queues in the queue space. Select a queue name in currently open queue space by executing qset and re-enter the command.
	See Also	`qmadmin`(1)
1125	ERROR: Cannot read the device list
	Description	While executing the chdl command, qmadmin failed to read the volume table of contents and universal device list associated with QMCONFIG.
	Action	Check to see that QMCONFIG is set correctly (that the device or file exists) and has been properly initialized, and re-enter the command. The livtoc command can be used to list the current volume table of contents and lidl can be used to list the current universal device list.
	See Also	`qmadmin`(1)
1126	ERROR: Invalid device index
	Description	While executing the chdl command, a device index was specified for a device that has not been created on the universal device list associated with the QMCONFIG device.
	Action	Use the lidl command to list the current contents of the universal device list and re-enter the chdl command with a valid device index.

1129	*ERROR: Device name length must be less than len* characters**
	Description	While executing the chdl command, the new device name was too long (that is, len characters or more).
	Action	Re-enter the command with a device name that is 64 characters or less in length.
	See Also	`qmadmin`(1)
1130	ERROR: Cannot lock the device list
	Description	While executing the chdl command, qmadmin failed to lock the QMCONFIG device for exclusive update.
	Action	Check the userlog for further information about the process that has the configuration locked. Re-enter the command after the configuration has been unlocked.
	See Also	`qmadmin`(1)
1131	ERROR: Cannot read the device list
	Description	While executing the chdl command, qmadmin failed to re-read the volume table of contents and universal device list associated with QMCONFIG after locking the configuration for exclusive access.
	Action	Check to see that the device or file specified by QMCONFIG still exists, is properly initialized, and re-enter the command. The livtoc command can be used to list the current volume table of contents and lidl can be used to list the current universal device list.
	See Also	`qmadmin`(1)
1132	ERROR: Invalid device index
	Description	While executing the chdl command, a device index was specified for a device that has not been created on (or has been deleted from) the universal device list associated with the QMCONFIG device.
	Action	Use the lidl command to list the current contents of the universal device list and re-enter the chdl command with a valid device index.

1133	ERROR: Cannot write the device list
	Description	While executing the chdl command, the update of the universal device list associated with the QMCONFIG device failed.
	Action	Check the userlog for any messages and use the lidl command to list the current contents of the universal device list.
	See Also	`qmadmin`(1)
1135	*ERROR: Device name length must be less than len* characters**
	Description	While executing the crdl command, the device name was too long (that is, len characters or more).
	Action	Re-enter the command with a device name that is 64 characters or less in length.
	See Also	`qmadmin`(1)
1140	ERROR: Cannot create device device, offset offset, size size on config
	Description	The operation to create a new extent on the universal device list, UDL, during the execution of crdl failed. The device name, device, offset value, offset, extent size, size, and configuration device, config, are printed in the message. If the QMCONFIG file exists, this command can fail if the file open fails; if a read on the device fails; if the file is not a configuration file; or if the file is not a normal file or a raw device (for example, a fifo file). If the file doesn't exist, the command can fail if file creation fails (for example, if the directory in which the file is to be created doesn't exist). The command can also fail if it failed to lock the configuration file; if there are no slots available in the UDL; if the extent to be created overlaps with an existing device on the UDL; if the first entry is being created and the device doesn't match QMCONFIG or the offset is not 0 or there is not enough space allocated to store the UDL and volume table of contents; or if a write fails on the device.
	Action	Check that the device specified is correct, the directory exists, and that the extent doesn't overlap with existing devices that are listed with the lidl command.
	See Also	`qmadmin`(1)
1145	WARN: Device not destroyed
	Description	While destroying a device with the dsdl command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
	Action	No action required.
	See Also	`qmadmin`(1)
1146	ERROR: Cannot list device dlindex on config
	Description	While executing the dsdl command, qmadmin failed to get the status of the specified device entry, dlindex, for the QMCONFIG device, config. Either device index is invalid or qmadmin was unable to open and read the universal device list, or config does not contain a valid configuration.
	Action	Check that the device is correct and check the universal device list with the lidl command.
	See Also	`qmadmin`(1)
1147	ERROR: Cannot destroy device dlindex on config
	Description	While executing the dsdl command, qmadmin failed to destroy the device entry for the specified dlindex and QMCONFIG device, config. The command can fail if it can't lock the configuration exclusively for update; if it can't open and read the universal device list, UDL; if dlindex is 0 and the UDL has other entries or the volume table of contents, VTOC, has tables other than the VTOC and UDL.
	Action	Check that the device is correct and check the universal device list with the lidl command.
	See Also	`qmadmin`(1)
1151	*ERROR: Command command* not found**
	Description	While executing the help command, an invalid command name was specified.
	Action	Execute the help command without any arguments to get a complete list of available commands.
	See Also	`qmadmin`(1)
1154	WARN: IPC resources not removed
	Description	While removing IPC resources with the ipcrm command and the -f option specified, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
	Action	No action required.
	See Also	`qmadmin`(1)
1157	ERROR: Device list not initialized on config
	Description	The lidl command was executed for a configuration, config, that is not initialized (that is, for a device or file that does not exist, or does not have at least one device defined in the universal device list). This message can also occur if the user does not have proper permissions to access the device.
	Action	Check that the configuration device or file specified for QMCONFIG is correct and initialize it using the crdl command. Also check the permissions on the device or file.
	See Also	`qmadmin`(1)
1166	ERROR: Cannot get VTOC on config
	Description	The livtoc command was executed for a configuration, config, that is not initialized (that is, for a device or file that does not exist, or does not have at least one device defined in the universal device list).
	Action	Check that the configuration device or file specified for QMCONFIG is correct and initialize it using the crdl command.
	See Also	`qmadmin`(1)
1172	ERROR: Must specify queue space name
	Description	While executing the qaddext command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name).
	Action	Re-enter the qaddext command with the correct queue space name.
	See Also	`qmadmin`(1)
1173	*ERROR: Queue space name length must be less than len* characters**
	Description	While executing the qaddext command, the queue space name was too long (that is, len characters or more).
	Action	Re-enter the command with a queue space name that is 15 characters or less in length.
	See Also	`qmadmin`(1)
1176	ERROR: Failed to add extent
	Description	While executing the qaddext command, qmadmin failed to add the extent. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog ranging from an invalid queue space name to other processes being attached to the queue space.
	Action	Re-enter the command when the problem has been resolved.
	See Also	`qmadmin`(1)
1177	WARN: No queue space is currently open
	Description	The qclose command was executed when a queue space is not currently open.
	Action	No action required.
	See Also	`qmadmin`(1)
1179	*ERROR: Queue name length must be less than len* characters**
	Description	While executing the qcreate or qchange command, the queue name was too long (that is, len characters or more).
	Action	Re-enter the command with a queue name that is 15 characters or less in length.
	See Also	`qmadmin`(1)
1181	ERROR: 'fifo' specified multiple times
	Description	While executing the qcreate command, the 'fifo' option was specified multiple times for the queue ordering value. The values 'fifo', 'lifo', 'priority', 'expiration' and 'time' may be entered once; 'fifo' and 'lifo' may not both be specified and must be specified as the last (least significant) option. Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate command specifying a valid value for the queue ordering option.

1182	ERROR: 'lifo' specified multiple times
	Description	While executing the qcreate command, the value 'lifo' was specified multiple times for the queue ordering argument. The values 'fifo', 'lifo', 'priority', 'expiration' and 'time' may be entered once; 'fifo' and 'lifo' may not both be specified and must be specified as the last (least significant) option. Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate command specifying a valid value for the queue ordering argument.
	See Also	`qmadmin`(1)
1183	ERROR: 'priority' specified multiple times
	Description	While executing the qcreate command, the value 'priority' was specified multiple times for the queue ordering argument. The values 'fifo', 'lifo', 'priority', 'expiration' and 'time' may be entered once; 'fifo' and 'lifo' may not both be specified and must be specified as the last (least significant) option. Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate command specifying a valid value for the queue ordering argument.
	See Also	`qmadmin`(1)
1184	ERROR: 'time' specified multiple times
	Description	While executing the qcreate command, the value 'fifo' was specified multiple times for the queue ordering argument. The values 'fifo', 'lifo', 'priority', 'expiration' and 'time' may be entered once; 'fifo' and 'lifo' may not both be specified and must be specified as the last (least significant) option. Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate command specifying a valid value for the queue ordering argument.
	See Also	`qmadmin`(1)
1185	ERROR: Invalid queue ordering
	Description	While executing the qcreate command, an argument other than 'fifo', 'lifo', 'priority', 'expiration' or 'time' was specified for the queue ordering value or an invalid format was entered. The values 'fifo', 'lifo', 'priority', 'expiration' and 'time' may be entered once; 'fifo' and 'lifo' may not both be specified and must be specified as the last (least significant) option. Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate command specifying a valid value for the queue ordering argument.
	See Also	`qmadmin`(1)
1186	ERROR: Device name for entry 0 must match QMCONFIG - device
	Description	While executing the chdl command, device entry 0 is being changed and the new device name does not match the value for the QMCONFIG environment variable (or the configuration device specified on the command line). The device must match QMCONFIG for entry 0 so that the software can find the Volume Table of Contents and Device List.
	Action	chdl is used to re-name a device. If re-naming the device for entry 0, first copy, move, or re-name the device, then set QMCONFIG to match the new device name, and then re-enter the chdl command specifying the QMCONFIG name for the device name.
	See Also	`qmadmin`(1)
1187	ERROR: 'fifo/lifo' must be last in sort order
	Description	While executing the qcreate command, a 'fifo' or 'lifo' value was specified in the queue ordering argument prior to the 'priority', 'expiration' or 'time' option, or both 'fifo' and 'lifo' were specified. The values 'fifo', 'lifo', 'priority', 'expiration' and 'time' may be entered once; 'fifo' and 'lifo' may not both be specified and must be specified as the last (least significant) option. Multiple values may be specified separated by commas'
	Action	Re-enter the qcreate command specifying a valid value for the queue ordering argument.
	See Also	`qmadmin`(1)
1189	ERROR: Cannot specify 'none' with any other argument for out-of-order option
	Description	While executing the qcreate or qchange command, the value 'none' was specified with either 'top' or 'msgid' in the out-of-order enqueuing argument. The values 'top' and/or 'msgid' may be entered once or the value may be 'none' (with no other arguments). Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate or qchange command specifying a valid value for the out-of-order enqueuing argument.
	See Also	`qmadmin`(1)
1190	ERROR: Queue name must be specified
	Description	While executing the qcreate or qchange command, the queue name was not entered at the prompt or an empty string was specified on the command line.
	Action	Re-enter the qcreate or qchange command specifying a valid queue name.
	See Also	`qmadmin`(1)
1191	ERROR: Cannot specify 'none' with any other argument for out-of-order option
	Description	While executing the qcreate or qchange command, the value 'none' was specified with either 'top' or 'msgid' in the out-of-order enqueuing argument. The values 'top' and/or 'msgid' may be entered once, or the value may be 'none' (with no other arguments). Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate or qchange command specifying a valid value for the out-of-order enqueuing argument.
	See Also	`qmadmin`(1)
1192	ERROR: 'top' specified multiple times
	Description	While executing the qcreate or qchange command, the value 'top' was specified more than once in the out-of-order enqueuing argument. The values 'top' and/or 'msgid' may be entered once or the value may be 'none' (with no other arguments). Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate or qchange command specifying a valid value for the out-of-order enqueuing argument.
	See Also	`qmadmin`(1)
1193	ERROR: Cannot specify 'none' with any other argument for out-of-order option
	Description	While executing the qcreate or qchange command, the value 'none' was specified with either 'top' or 'msgid' in the out-of-order enqueuing argument. The values 'top' and/or 'msgid' may be entered once or the value may be 'none' (with no other arguments). Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate or qchange command specifying a valid value for the out-of-order enqueuing argument.
	See Also	`qmadmin`(1)
1194	ERROR: 'msgid' specified multiple times
	Description	While executing the qcreate or qchange command, the value 'msgid' was specified more than once in the out-of-order enqueuing argument. The values 'top' and/or 'msgid' may be entered once or the value may be 'none' (with no other arguments). Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate or qchange command specifying a valid value for the out-of-order enqueuing argument.
	See Also	`qmadmin`(1)
1195	ERROR: Invalid out-of-order option
	Description	While executing the qcreate or qchange command, a value other than 'top', 'msgid' or 'none' was entered for the out-of-order enqueuing argument, or the value is not formatted correctly. The values 'top' and/or 'msgid' may be entered once or the value may be 'none' (with no other options). Multiple values may be specified separated by commas.
	Action	Re-enter the qcreate or qchange command specifying a valid value for the out-of-order enqueuing argument.
	See Also	`qmadmin`(1)