Oracle® Argus Safety User's Guide Release 8.1 E70262-01 |
|
|
PDF · Mobi · ePub |
This chapter describes the Worklist tab and the information that it displays.
The Administrator may have configured your user account so that the Worklist displays each time you log on to the system. Place the cursor over Worklist in the menu bar to view the available options.
The worklist displays the following information:
New cases created in the system
Cases that are currently open
To Do items like letters, reports, and other action items
Transmission status of reports
All bulk printed reports
When using the worklist, be aware of the following
The Worklist dialogs have filtering options on all elements in each worklist as follows:
New/Open
Bulk Print
Reports
Action Items
Bulk Transmit
Bulk Transmit ICSR Messages
Bulk Transmit ICSR Reports
Coding Status
Coding Action Items
Contact/Letters
Letters
You can filter on any element by clicking the Filter icon to display the filtering row.
The system now provides a type ahead feature to enable you to filter on any text/date element.
You can minimize the filtering options by clicking the minimize icon.
The paper clip icon identifies the maximize icon.
You can perform a Like search. In other words, if you search for "Cure," the system returns all elements starting with "Cure."
You can perform a wildcard search. In other words, if you search for "Cure" the system returns all elements containing "Cure."
The user can click the Search button to filter for reports in the reports list.
These filtering options are available from worklist-specific views and when performing case or reports drill down searches from the Dashboards.
The system saves all user preferences, including filtering options and filter views, for future use.
The Days Open fields on the WL|New and Open have a drop-down list with values of <7, 7-15, >15, and the Worklist Reports has values of 7, 15
The Assigned To filtering element has been removed from the Worklist New and Open dialogs in the MAIN filtering criteria
All the worklist dialogs have a refresh icon beside the View option. This enables you to refresh worklist dialogs that use the preference saved in the worklist elements.
All the worklist dialogs have a minimize button to minimize the filtering options. This increases the number of rows that display in the list.
The Worklist Filtering options enable you to search for a specific case. The Filter contains editable fields that enable you to either select from a list of values or perform a Wild card search. This feature applies to all the Worklist Filters across all worklist items.
The Worklist filter in each Worklist entity contains the following filtering options:
View Individual
View Group and
View All
The default filter is Case Number. This enables you to enter a Case Number to search for results matching a specified case number.
The following worklist options are available to you.
New and Open
Action Items
Coding Action Items
Contacts
Reports
Bulk Transmit
Bulk Print
Coding Review
Bulk Transmit ICSR
Local Labeling
Coding Status
Letters
This section discusses the features provided by the Worklist - New and Open menu items.
When you select New, the system displays new worklist items that have been assigned but not yet accepted. You can also see unassigned cases.
When you select Open, the system displays all cases that have been assigned and accepted.
To view the Worklist - New or Open page
Select Worklist --> New or Worklist --> Open
When the system opens the Worklist - New or Worklist - Open screen, enter
Tip:
The same fields are displayed in the Worklist - Open screen also.When using the New/Open Worklist screen, be aware of the following:
The New/Open Worklist displays the Workflow Group and the Workflow State currently associated with the case.
The Workflow Group is available in the Worklist New and Open printouts.
You can sort on this field.
The lock icon identifies cases that are locked.
The Initial Date field has been renamed Receipt Date and enables you to view the date the case was first received. The new name displays on the UI and on the Printout.
The system allows multiple assignments of cases for Workflow/Enterprise Managers only on the Worklist New/Open dialogs.
The system displays the user name to enable you to select a User for reassignment.
If the user has cases open, the system skips those cases.
The system tracks updates in the audit log.
When the user selects this option, the selected cases have the same user as modified by the user.
The following is an illustration of the Search Case section.
Field | Description |
Filter | Performs searches for worklist items on the basis of the filtering criteria selected here. |
Value | Enables the user to select the desired Value as the search criterion. |
Search Button | Enables the user to open the selected or entered case ID. |
Group Membership | Enables the user to select the type of Group Membership. |
Case Owner | Enables the user to select the Case Owner. |
Assigned To | Enables the user to select who the case has been assigned to. |
Only view locked Cases requiring Follow-up | Select this checkbox to view only those locked cases that require follow-up. |
View Individual | Enables the user to view individual items assigned to this group. |
View Group | Allows the user to view all items assigned to this user group. |
View All | Allows administrator and workflow manager to see all items in the system. |
The Filter function enables you to search for entities that are only in the worklist. The following is an illustration of the options available in the Filter drop-down list.
The following table describes the options available in the Filter drop-down list.
Option | Description |
Case Number | Filters on Case Number. |
Workflow State | Displays only those workflow states that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to, etc. |
Product | Displays only those products that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to, etc. |
Event Preferred Term | Displays only those Event PTs that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to, etc. |
Event as Reported | Displays the name of the event as reported. |
Case Report Type | Displays only those Report Types that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to, etc. |
Product Group | Displays product groups where the Primary Suspect Drug occurs. |
Note:
The Assigned To option is not available if the user selects Individual radio button option from View.The following is an illustration of the Total Number of Rows section
The following table describes the contents in the columns in the Total Number of Rows section.
Field | Description |
---|---|
Priority | Displays the Priority of the Case. |
Lock Status | Enables the user to view the Locked state of the case by the icon. If the locked icon is present, it indicates that the case is locked and vice versa.
Note: The lock icon is also displayed if the Case Status is Initial or Follow up. If the case is Follow-up, additionally, the Follow up number is also displayed. For example: Initial or F / U: 1. The icon (displayed in the lock state column) in the Worklist - New, Open and Reports screens denotes a SUSAR (Suspected Unexpected Serious Adverse Reaction) case. Lock State Header Options Click the Lock State header row. A pop-up appears listing the following sorting options:
These options enable you to sort cases based on the case categorization. |
Receipt Date | If the option "Display Initial Receipt Date always" is configured, the Initial Received date of the case is displayed in the Receipt Date column on the Worklist screen.
If the option "Display Initial Receipt Date or the latest Follow-up Receipt Date" is chosen, and if follow-up entry exists, the latest F/UP Received Date regardless of significant or not is displayed in the Receipt Date column on Worklist screen. If follow-up do not exist, then the Initial Received date of the case is displayed in the Receipt Date column on Worklist screen. |
Aware Date | Displays the Aware Date of the case.
Note: Aware date is the latest significant follow up which is received in the case or the Initial Receipt Date if there are no Significant follow ups present in the case. |
Days Open | Displays the number of days that have elapsed between the Initial Receipt Date or latest significant Follow-up Receipt Date (if it exists) and the current system date (database server). |
Days Remaining | Displays the number of days that are remaining, as configured in the Administration module for Case Processing. |
Case Number | Displays the Case Number.
Note: Click the case number to open the case. |
Workflow Status | Displays the current workflow status of the case. |
Product Name | Displays the first suspect product in question. |
Generic Name | Displays the generic name of the suspect product in question. |
Event PT | Displays the Primary Event and Verbatim, as reported. |
Event Verbatim | Displays the Event Verbatim, as reported, in the format Primary Event (Verbatim as Reported). |
S/U/R | Displays the Case Level Assessments:
Note:
|
F, LT or H |
Note: If any of the above are present together, then Fatal takes precedence followed by LT followed by H. If the case is neither of the above, No is displayed. |
Case Type | Displays report type information. |
Study ID | Displays the Study ID of the study cases.
Note: If Study ID is not present, this field is blank. |
Reporter Type | Displays the Reporter type for the Primary Reporter in the case.
Note: If Reporter ID is not present, this field is blank. |
Country | Displays the Country of the incident. |
Assigned To | Displays the current owner or "Unassigned" user to the case. |
Owner | Displays the Owner of the case.
By default, the first user to accept a case after book-in becomes the "Case Owner". The Case Owner has the access right to assign the cases that he owns to another user. Though a Case Owner cannot be reassigned automatically after the initial assignment, he can be reassigned manually by a Workflow manager. Note: If Owner is not present, this field is blank. |
Print List Button | Allows the user to print the current worklist for reference. |
Note:
You can open a case in read-only mode without creating a case lock. Use Open in Read-Only to open the case in read-only mode. You cannot save a case in a Read-Only mode.The Worklist>New and Worklist>Open also display a status beside Priority, indicating that the time remaining has exceeded the allocated time.
The Worklist pages have some common options for your use. To see a list of these options, right-click the icon Lock State icon to display an option menu.
The following tables lists the different user options and where they are available
Option | Description | Option available under Worklist |
---|---|---|
Open Read Only | Opens the selected case in read-only mode. | New, Open |
Accept Case | Allows the user to accept the case and assign a user name as responsible for that case. A case marked with their name as responsible moves the case from the user's New tab to their Open tab. | New |
View Case | Opens the case. | Action Items |
Accept Action Item | This option is displayed to users who have access to Worklist > Action Items.
On clicking this option, the username of the current user is populated in the Assigned To column under Case Form > Activities tab > Action Items > Worklist > Action Item list. The user who accepted the action item can see it under the assigned action item in Dashboard > Personal Argus Status. |
Action Items |
Assign Action Item |
This option is displayed only to Workflow Managers, and is displayed in the context menu. On selecting this option, a drop-down list (of all active users) is displayed in the Assigned To field for the selected row, with (Unassigned) as the default value. On selecting a user from this drop-down list, the assigned user is populated in the Assigned To column under Case Form > Activities tab > Action Items > Worklist > Action Item list. The user who accepted the action item can see it under the assigned action item in Dashboard > Personal Argus Status. |
Action Items |
Case Summary | Displays the Summary dialog to allow the user to view a summary of the case form data. | Action Items, Open, Reports |
Adjust Priority | Allows the workflow manager to modify the priority level of the case. | New, Open |
Close Multiple Cases | Enables the user to close multiple cases. | New, Open |
Adjust Assignment | Enables the user to adjust assignment. | New, Open |
Close Case | Enables the user to close the case. | New, Open |
Adjust Case Owner | Enables the (re-)assignment of a Case Owner by a Workflow Manager. | New, Open |
View Report | Allows users to open the report. | Reports |
Report Details | Allows users to open the report details. | Reports |
View Multiple Reports | Allows users to open multiple reports. | Reports |
Accept Report | Allows the user to accept the unassigned report. | Reports |
Approve Report | This option is enabled only if the report is in the Generated state. Select this option to automatically open the Routing tab of the Report Details pop-up window, with the Comment field active waiting for user input. | Reports |
Local Labeling | Allows the user to open the local labeling for the case that the expedited report belongs to, showing all the non-assessed local labeling rows. | Reports |
Mark for Non-Submission | Allows the user to mark the report required for Non-Submission. The report details dialog is displayed with focus to the Submission tab. | Reports |
Mark Multiple for Non-Submission | Allows the user to also mark Multiple reports for Non-Submission. The notes and date entered are also reflected in all the reports. | Reports |
Mark Multiple for Approval | Allows the user to also mark multiple reports for approval. | Reports |
Close Action Item | Allows the user to close the highlighted action item.
Note: Only the Owner of the action item can view this option, not all the users. |
Action Items |
Assign Multiple Cases | Allows the user to make assignments for multiple cases. | Open |
Allows the user to print a case form from the New and Open worklist tabs. | New, Open | |
Print Multiple Cases | Allows the user to print a case form from the New and Open worklist tabs. | New, Open |
Medical Review | Allows the user to view the Medical Review dialog (if he has the access rights to view it). | New, Open, Reports |
Print Medical Summary | Allows the user to view the Medical Summary Report (if he has the access rights to view it). | Reports |
Coding Review | Allows the user to view the Coding Review dialog if the user belongs to a group with access rights to Coding Review (if he has the access rights to view it). | New, Open |
Route Multiple Cases | Allows the user to route multiple cases to the selected workflow state. | New, Open |
This section discusses the features on the Worklist - Action Items.
To view the Worklist -- Action Items page
Select Action Items from Worklist.
When the system opens the Action Items screen, enter the information in the fields as necessary.
The Worklist Action Items displays the entire description of the Action item selected in the Description field on the dialog. Be aware of the following:
The system displays the Action Item Code with the Description of the Action Item.
You can filter or sort the groups assigned to the Action Items.
The Product Name and Study ID have been combined into a single column.
The printout prints the new columns.
Worklist > Coding Action Items displays the entire description of the action item selected in the Description field on the dialog.
The system generates open Query Action Items based on the advanced conditions rules for the action item type.
When the user saves the case or clicks the Generate Query icon on the Quick Launch toolbar, the system creates an open action item based on the profile switch.
The assigned group is defined in the code list. If there is no defined group, the default group is Unassigned.
The Due date for the action item is the System Date + the Due Date (in days) as defined in the code list.
The Open Date is the system date on the day the Query is created for the case.
When you click Generate Queries icon, the system generates the Action Item queries. These queries are based on the rules define for the Action Item types in Code List Maintenance where the Advance Condition satisfies the case criteria.
This item displays on the Quick Launch Toolbar when the case it open.
Short cut key: CTRL+ALT+X
When you save or click Generate Query, the system evaluates all open query action types.
If, after the system schedules the action item query, unresolved queries are resolved or there are queries that do not meet the criteria of the Advance Conditions, the system closes the action item and uses the system date as the close date.
If there are open query action Items, the system does not create new action items with the same name when the system tries to resolve the open queries list in the case form.
When querying action items, be aware of the following:
The Worklist|Action Items enables you to query only query action items by selecting View Query Action Items.
The Worklist|Action Items enables you to filter only overdue action items by clicking Overdue Action Items. The Worklist displays the Action Items where the action item due date is before today's date (system date).
By default, the system displays all types of action items to the user.
The system allows all open query type action items to be populated in a Letter template by adding the following place holder [OPEN_QUERY]. This populates the open queries letter template content as configured in the code list when the letter is being generated by the user in a separate line for each open query in the following format.
Attribute | Tool Tip | Example |
---|---|---|
Query Name | Name of Query to be included in the letter template. | QUERY_Preg_LMP (must begin with "QUERY_") |
Query Condition | Advanced condition. If the condition is true, then insert text into the generated letter. | Patient is pregnant and date LMP missing (Advanced Condition) |
Query Letter Text | Text to be inserted in generated letter if Query Condition is True. If Query Condition is no true, the no query item is created. | Please provide the Date of Last Menstrual Period (LMP) for the patient. |
Query Item Text | Text to be display on the list of open queries | Patient missing Date of LMP. |
Example:
Please provide Reporter Name (Adv. Cond is Reporter name is null)
Please provide Physician's address (Adv. Cond is Reporter address is null)
Please provide Physician's phone number (Adv. Cond is Reporter phone number is null)
If the case is saved and the Reporter Name exists, the system creates two Action items.
The following is an example of a generated letter:
The following is an illustration of the Search Case section.
The following table lists and describes the fields and controls in the section.
Field | Description |
---|---|
Filter | Performs searches for worklist items on the basis of the filtering criteria selected here |
Value | Enables the user to select the Value as the search criterion |
Search Button | Enables the user to open the selected or entered case ID. |
View Individual | Enables the user to view individual items assigned to this user. |
Group Membership | Enables the user to view the group membership. |
View Group | Enables the user to view all items assigned to this user group. |
View All | Enables administrator and workflow manager to see all items in the system. |
View Query Action Items | Enables you to query only query action items. |
Overdue Action Items | Displays the Action Items where the action item due date is before today's date (system date). |
The Filter function enables you to search for entities in the worklist. The following tables describes the options available in the Filter drop-down list.
Option | Description |
---|---|
Case Number | Displays the Case Number |
Workflow State | Displays only those workflow states that occur in the given work, considering other filter elements such as Case Owner, Assigned to, etc. |
Product | Displays only those products that occur in the given work, considering other filter elements such as Case Owner, Assigned to, etc. |
Event Preferred Term | Displays only those Event PTs that occur in the given work, considering other filter elements such as Case Owner, Assigned to, etc. |
Event as Reported | Displays the Event as Reported |
Case Report Type | Displays only those Report Types that occur in the given work, considering other filter elements such as Case Owner, Assigned to, etc. |
Note:
The Assigned To option is not available if you select the Individual radio button option from View.The following is an illustration of the Total Number of Rows section.
The following table describes the contents of each column in the Total Number of Rows section.
Column | Description |
---|---|
Case Number | Displays the Case Number.
Note: Click the case number to open the case. |
S/U/R | Displays the Case Level Assessments:
Note: Unknown is treated as a "?". When the user clicks the SUR link, the Case Summary is displayed. |
Description | Displays the description of the Action Item in question. |
Date Open | Displays the date the action item was opened. |
Date Due | Displays the due date. |
Days Open | Displays the number of days for which the action item has been open. |
Assigned To | Displays the current owner or "Unassigned" user for the case |
Print List Button | Allows the user to print the current worklist for reference. |
This section discusses the features provided on the Worklist - Coding Action Items page.
To view the Worklist - Coding Action Items page
Select Worklist --> Coding Action Items.
When the system opens the Coding Action Items page, enter the information in the fields as necessary.
The following is an illustration of the Search Case section.
The following table lists and describes the fields in the Search Case section.
Field | Description |
---|---|
Filter | Performs searches for worklist items on the basis of the filtering criteria selected here |
Value | Select a value as a search criteria |
Assigned To | Searches on the basis of who the case has been assigned to. |
View Individual | View only individual items assigned to this user group. |
View Group | View all items assigned to this user group. |
View All | Enables administrator and workflow manager to see all items in the system. |
The Filter functionality performs searches on entities present in the worklist only. The following table lists and describes the options available in the Filter list.
Option | Description |
---|---|
All | Does not filter on any cases in the work list, excluding other filter elements that are specified, e.g. Case owner, etc. |
Case Number | Displays the Case Number |
Workflow State | Displays only those workflow states that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to, etc. |
Product | Displays only those products that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to, etc. |
Event Preferred Term | Displays only those Event PTs that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to, etc. |
Event as Reported | Displays the name of the event as reported |
Case Report Type | Displays only those Report Types that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to. |
Note:
The Assigned To option is not available if the user selects Individual radio button option from View.The following is an illustration of the Total Number of Rows section.
The following table describes the headers within Total Number of Rows:
Field | Description |
---|---|
Case Number | Displays the Case Number.
Note: Click the case number to open the case. |
S/U/R | Displays the Case Level Assessments:
Note:
|
Description | Displays the description of the Action Item in question. |
Date Open | Displays the date the action item was opened. |
Date Due | Displays the due date. |
Days Open | Displays the number of days for which the action item has been open. |
Assigned To | Displays the current owner or "Unassigned" user to the case |
Print List Button | Allows the user to print the current worklist for reference. |
This section discusses the features provided on the Worklist - Contacts and Letters page.
To view the Worklist -- Contacts and Letters page
Select Worklist --> Contacts and Letters.
When the system opens the Worklist - Contacts and Letters screen, enter the information in the fields as necessary.
The following is an illustration of the Search Case section of the Worklist -- Contacts screen.
The following table lists and describes the fields in the Search Case section.
Field | Description |
---|---|
Filter | Performs searches for worklist items on the basis of the filtering criteria selected here |
Value | Selects the Value as the search criterion |
Select Button | Opens the selected or entered case ID. |
Assigned To | Selects the user to whom the case has been assigned. |
View Individual | View individual items assigned to this user group. |
View Group | View all items assigned to this user group. |
View All | Enables the administrator and workflow manager to see all items in the system. |
The Filter function enables you to search for entities in the worklist. The following table below describes the options available in the Filter drop-down list.
Option | Description |
---|---|
Case Number | Displays the case number. |
Note:
The Assigned To option is not available if the user selects Individual radio button option from View.The following is an illustration of the Total Number of Rows section.
The following table describes the columns in Total Number of Rows:
Field | Description |
---|---|
Case Number | Displays the Case Number.
Note: Click the case number to open the case. |
Study ID | Allows the user to view the Study ID present in the case. |
Description | Displays the description of the Action Item in question. |
Product Name | Allows the user to view the Product Name of the Primary Suspect Drug. |
Aware Date | Displays the Aware Date of the Case. Aware date is the latest significant follow up which is received in the case or the Initial Receipt Date if there are no Significant follow ups present in the case. |
Date Due | Displays the due date. |
Days Open | Displays the number of days for which the action item has been open. |
Assigned To | Displays the current owner or "Unassigned" user to the case. |
Print List Button | Allows the user to print the current worklist for reference. |
This section discusses the features available from Worklist - Reports page.
To view the Worklist Reports page
Select Worklist --> Reports.
When the system opens the Worklist - Reports screen, enter the appropriate information as necessary.
The following is an illustration of the Search Case section of the page.
The following table lists and describes the fields in the Search Case section.
Field | Description |
---|---|
Filter | Performs searches for worklist items on the basis of the filtering criteria selected here. |
Value | Selects the Value as the search criteria. |
Search Button | Opens the selected or entered case ID. |
Assigned To | Selects the person to whom the case is assigned. |
View Individual | Enables the administrator and workflow manager to see individual items in the system. |
View Group | View all items assigned to this user group. |
View All | Enables the administrator and workflow manager to see all items in the system. |
The Filter function enables you to search for entities in the worklist. The following tables describes the options available from the Filter drop-down list.
Option | Description |
---|---|
Case Number | Displays the Case Number. |
Reporting Destination | Displays the report destination (agency) for which the report is scheduled. |
Product | Displays only those products that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to, etc. |
Event Preferred Term | Displays only those Event PTs that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to, etc. |
Report Status | Displays the status of the report as Approved, Generated or Scheduled. |
Case Report Type | Displays only those Report Types that occur in the given worklist, considering other filter elements such as Case Owner, Assigned to, etc. |
Report Form | Displays the description of the report. |
Due Date | Enter a due date. |
Note:
The Assigned To option is not available if the user selects Individual radio button option from View.When using filtering, be aware of the following:
The filter options have a Study ID element that enables the user to filter cases within the list (not deleted).
This option is a type ahead that enables users to enter values for studies defined in the configuration.
The type ahead feature limits the users to 25 items in the drop-down list.
When the user selects type ahead values, the system performs a like search.
The filter options have a Reporting Group element that enables the user to filter cases in the list.
This option is a type ahead that enables users to enter values for Reporting Groups defined for the reports in the worklist.
The type ahead limits the users to 25 items in the drop-down list.
When the user selects type ahead values, the system performs a like search.
The filtering elements have the Product and Reporting destinations removed from the list.
The user can mark multiple reports for approval by selecting the Mark Multiple for Approval option.
The user can view the Medical Summary report for all users who have permission to print the Medical Summary report.
The system displays the Report Details dialog and permits the user to enter the approval notes that are applied to all selected reports. The system skips any reports selected by the user that have the following statuses:
Scheduled
Disapproved
Approved
The system hides the reports fields from the report details dialog and does not permit the user to access or modify any other tabs.
The system hides the Route button to prevent users from modifying the Report Status.
Workflow Enterprise users can access View and can modify the report details for all reports for all cases across multiple sites in their lists.
When filtering by report destination, be aware of the following:
You can click the magnifying glass icon to filter reports by report destination. The system displays the standard lookup dialog.
The Report Destination filter multi-selection screen list contains the names of all agencies as configured in the Argus Regulatory Authority CodeList.
The system displays only the report rows that match the authority/agency you selected.
When filtering reports by product family, be aware of the following:
You can click the magnifying glass icon to filter reports by product family. The system displays the standard lookup dialog.
The Product Family filter multi-selection screen contains a list of all product family names as configured in the Argus Products Code List.
The system displays only the report rows that match the product you selected.
When filtering reports by country of incidence, be aware of the following:
You can click the magnifying glass icon to filter reports by country of Incidence. The system displays the standard lookup dialog.
The Country of Incidence filter multi-selection screen contains a list of all available countries.
The system displays only the report rows that match the country of incidence you selected.
The following is an illustration of the Total Number of Rows section.
The following table lists and describes the columns in the Total Number of Rows section.
Field | Description |
---|---|
Selected | Allows the user to select the report. |
Lock State | Allows the user to view the Locked state of the case by the icon. If the locked icon is present, it indicates that the case is locked and vice versa.
Note: The lock icon is also displayed if the Case Status is Initial or Follow up. If the case is Follow-up, additionally, the Follow up number is also displayed. E.g. Initial or F / U: 1. The icon displayed in the lock state column, in the Worklist - New, Open and Reports screens denotes a SUSAR (Suspected Unexpected Serious Adverse Reaction) case. Lock State Header Options Click the Lock State header row. A pop-up appears listing the following sorting options:
These options enable you to sort cases based on the case categorization. |
Status | Displays the report status. Click the link displaying the report status to view the Report Details. Refer to the About the Report Details Dialog Box section for descriptions of each tab. |
Case Number | Displays the Case Number.
Note: Click the case number to open the case. |
Country of Incidence | Displays the Country of incidence. |
Report Type | Displays the Case Report Type. |
Suspect Product | Displays the Trade name for which the report has been scheduled. A "+" displayed at the end of a Product Name indicates that more than one Suspect Company Products exist.
A Device Name is also displayed for those Reports which were scheduled for the Device. |
Diagnosis | Displays the Primary Event Diagnoses PT |
Event Verbatim | Displays the event verbatim (verbatim as reported) of the Primary Event. |
S/U/R | Displays the Case Level Assessments:
Note: Unknown is treated as a "?". When the user clicks the SUR link, the Case Summary gets displayed. |
F or LT | Indicates whether a case is fatal or life threatening as follows:
Note: If any of the above are present together, then Fatal takes precedence followed by LT. If the case is neither of the above, No is displayed. |
7/15 | Displays 7 if the report is due within 7 days
Displays 15 if the report is due in more than 7 days |
Report Form | Displays the description of the report. Click the link to view the DRAFT Report PDF. |
Destination | Displays the report destination (agency) for which the report is scheduled. |
Initial / Follow-up (#) | Displays if the report is Initial or Follow-up.
If it is a Follow-up, the follow-up number is printed. |
Due Date | Displays the date the report is due. |
Days Past Due | Displays the number of days the report is past due date. |
Days Open | Displays the number of days since the report has been open. |
Date Scheduled | Displays the Scheduled Date of the report. |
Assigned | Displays the name of the individual to whom the case has been assigned. |
Downgrade | Displays Yes if the report is a downgrade report. |
Print List Button | Allows the user to print the current worklist for reference. |
The following table lists and describes the options available under Lock State.
Option | Description |
---|---|
View Report | Enables the user to view the report as a PDF. |
Report Details | Enables the user to view the report details. |
Accept Report | Enables the user to accept the report. |
Approve Report | Enables the user to approve the report. |
Adjust Assignment | Enables the user to adjust assignment for the selected report. |
Medical Review | Enables the user to view the Medical Review of the case. |
Print Medical Summary | Enables the user to print the medical summary of the case. |
Case Summary | Enables the user to view the case summary of the case. |
Local Labeling | Enables the user to view the local labeling dialog.
|
Mark for Non-Submission | Enables the user to mark the report for non-submission. |
Mark for Submission | Enables the user to mark the report for submission. |
View Multiple Reports | Enables the user to view multiple reports as a PDF. |
Mark Multiple for Non-Submission | Enables the user to mark multiple reports for non-submission. |
Mark Multiple for Submission | Enables the user to mark multiple reports for submission. |
Mark Multiple for Approval | Enables the user to mark multiple reports for approval. |
The Bulk Transmit function lists the status for all transmission events against your assigned cases.
Select Worklist --> Bulk Transmit.
When the system opens the Bulk Transmit screen, enter the appropriate information as necessary.
The following is an illustration of the Search Case section.
The following tables lists and describes the fields and controls in the Search Case section.
Field | Description |
---|---|
Filter | Performs searches for worklist items on the basis of the filtering criteria selected here |
Value | Enables the user to select the Value as the search criterion |
Search Button | Enables the user to open the selected or entered case ID. |
View Individual | Enable users to view individual items assigned to this user group |
View Group | Enable the user to view all items assigned to this user group. |
View All | Enable administrator and workflow manager to see all items in the system. |
The Filter function enables you to search for entities in the worklist. The following table describes the options available from the Filter drop-down list.
Option | Description |
---|---|
Case Number | Displays the case number |
Reporting Destination | Displays the report destination (agency) for which the report is scheduled. |
Report Form | Displays the report form |
Report Status | Displays the report status |
The following is an illustration of the Total Number of Rows section.
The following table below describes the columns in Total Number of Rows section
Field | Description |
---|---|
Case Number | Displays the Case Number. Click the Case Number to view the case details. |
Report Form | Displays the Description of the report
Click the link to view the DRAFT Report PDF. |
Fax Number | Displays the fax number of the report recipient |
Recipient Name | Displays the name of the report recipient |
Recipient Company | Displays the name of the company of the report recipient |
Date Created | Displays the date on which the report was created. |
Date Sent | Displays the date on which the report was transmitted to the recipient. |
# of Pages | Displays the number of pages in the report |
Attempts | Displays the number of attempts made to transmit the report. If you are using Right Fax, the value of this field is displayed as 0 even if the Right Fax had attempted it multiple times. This is an unsupported feature in Right Fax. |
Sender | Displays the name of the sender of the report |
Lock State | Displays the lock status of the report. |
Email Address | Allows the user to enter the email address. |
Due Date | Displays the due date for the report. |
Sender Agency Name | Displays the name of the agency that has generated the report |
Status | Displays the Report Status e.g. Scheduled or Generated etc.
Click the Report Status to view the Report Details. Refer to the About the Report Details Dialog Box section for descriptions of each tab. |
Print List Button | Allows the user to print the current worklist for reference. |
The following table describes the user options.
Option | Description |
---|---|
View Transmission | Displays the report in a PDF format. |
Mark report as Submitted | Marks the report for the selected row as submitted.
Note: This option is displayed to only those users who have the access rights to mark a report as submitted. |
Remove transmission | Failed transmissions can be removed using this option as it removes the transmission log entry from the list.
Note: A report whose status is pending cannot be transmitted. |
Re-transmit | This options allows reports to be re-generated and re-transmitted if report generation had failed earlier. For failure in other stages of report transmission, this option performs only retransmission. |
Submit Multiple Reports | Multiple reports that are selected from the list can be marked as submitted simultaneously. |
Re-transmit Multiple | The status of multiple reports that are selected from the list can be changed to "pending," and those reports can be re-transmitted. |
Remove Multiple Transmissions | Transmission of multiple reports that are selected from the list can be removed. |
The Bulk Print function displays a separate list for all Bulk Print events against reports.
Select Worklist --> Bulk Print
When the system opens the Bulk Print page, enter the appropriate information.
The following is and illustration of the Search Case section.
The following table lists and describes the fields and controls in the Search Case section.
Field | Description |
Filter | Performs searches for worklist items on the basis of the filtering criteria selected here. |
Value | Enables the user to select the Value as the search criterion. |
Search Button | Enables the user to search. |
View Individual | Enables the user to view individual items assigned to this user group. |
View Group | Allows the user to view all items assigned to this user group. |
View All | Allows administrator and workflow manager to see all items in the system. |
The Filter function enables you to search for entities in the worklist. The following table below describes the options available from the Filter drop-down list.
Option | Description |
---|---|
Case Number | Displays the case number |
Reporting Destination | Displays the report destination (agency) for which the report is scheduled. |
Report Form | Displays the report form |
Report Status | Displays the report status |
The following is an illustration of the Total Number of Rows section.
The following table below describes the columns in Total Number of Rows:
Field | Description |
---|---|
Case Number | Displays the Case Number. Click the Case Number to view the case details. |
Report Form | Displays the Description of the report
Click the link to view the DRAFT Report PDF. |
Agency Name | Displays the name of the agency that has generated the report |
Printer Name | Displays the name of the printer. |
Date Created | Displays the date on which the report was created. |
Date Sent | Displays the date on which the report was transmitted to the recipient. |
Lock State | Displays the lock status of the report. |
Due Date | Displays the due date for the report. |
Sender | Displays the name of the sender of the report |
Report Status | Displays the Report Status.
Click the Report Status to view the Report Details. |
Print List Button | Allows the user to print the current worklist for reference. |
Click the icon associated with each report to view available user options. The following table describes the Bulk Print user options.
Option | Description |
---|---|
View Report | Displays the report in a PDF format. |
Mark report as Submitted | Marks the report for the selected row as submitted.
Note: This option is displayed to only those users who have the access rights to mark a report as submitted. |
Remove Print Job | Removes the print job entry from the list.
Note: A report whose status is pending cannot be printed. |
Re-print | This option is displayed if the selected row has a status of failure or success. Select this option to change the status back to pending and the re-print the report. |
Submit Multiple Reports | Multiple reports that are selected from the list can be marked as submitted simultaneously. |
Re-print Multiple | The status of multiple reports that are selected from the list can be changed to "pending," and those reports can be re-transmitted. |
Remove Multiple Print Jobs | Print jobs of multiple reports that are selected from the list can be removed. |
The Bulk ICSR Transmit function displays only those ICSR Reports that are awaiting submission (not in submitted state) when transmitted from "Bulk Report By Form" to the Trading partner.
This menu option is not displayed if Interchange is not licensed or if you do not have access to open worklist screens based on existing File Menu Access rights in the Group Configuration.
The Bulk ICSR Transmit page has two (2) tabs as follows:
Reports -- Displays the status of individual ICSR Reports that are in the process of being transmitted.
Messages -- Displays the status of ESM Messages which may contain multiple reports.
To view the Bulk ICSR Transmit page
Select Worklist --> Bulk ICSR Transmit.
When the system opens Bulk ICSR Transmit page, entered the appropriate information as necessary.
The following is an illustration of the Reports tab.
Click the relevant links for information about the sections and user options on the Reports tab.
The following is an illustration of the Search Criteria section.
The following table lists and describes the fields in the Search Criteria section.
Field | Description |
---|---|
Report | Select the type of report from the drop-down list, as applicable.
Select E2B, eVAERS or eMDR from the list to view the transmission status of the report. |
Case # | Displays the Case Number.
Click the Case Number to view the report. |
Message Type | Select a pre-defined message type.This field is set to ichicsr and is disabled if report is set as eMDR or eVAERS |
Periodic Report | This field is enabled for message type that are marked as "Periodic" in Message type codelist.
This field is disabled for eVAERS and eMDR. |
Start Date | Enter the start date. |
End Date | Enter the end date. |
Range | Select a date range. |
Search button | Triggers search based on the search criteria. |
Only show transmissions that have reached a failure state | Enable this checkbox to search for only those transmissions that have a failed status. |
Show all transmissions (submitted and unsubmitted) having a error ACK | When this checkbox is checked by the user during the Search action, the system brings back any ICSR report that has received an error ACK (acknowledgement), irrespective of whether it has been marked as submitted or not.
Note: When this checkbox is checked, the checkbox "Only show transmissions that have reached a failure state" is automatically is unchecked. |
View Individual | Displays all items assigned only to the individual user. |
View Group | Allows the user to view all items assigned to this user group. |
View All | Allows administrator and workflow manager to see all items in the system. |
Stage Legend | Shows the status (through colors) corresponding to each stage. |
The following is an illustration of the Total Number of Rows section.
The following table describes the columns in the Total Number of Rows section.
Field | Description |
---|---|
Action | Displays the icon containing the available user actions.
Tip: Click on the case lock status (unlocked, locked or archived) for further options. |
Case Number | Displays the Case Number. Click the Case Number to view the case details. |
Submitted Date | Displays the date when the report was submitted. |
Case Status | Displays the current workflow of the state |
Reporting Destination | Displays the name of the Reporting Destination |
Date Created | Displays the date on which the report was created. |
Date Transmitted | Displays the date when the report was transmitted. |
Local Company Name | Displays the name of the local company that has sent the report. |
Status | Displays the Report Status e.g. Scheduled or Generated etc.
Click the Report Status to view the Report Details. |
Message Type | Displays the ICSR message type for the transmission |
Transmit | Denotes Processing Report |
EDI In | Denotes EDI In |
EDI Out | Denotes EDI Out |
MDN Rec. | Denotes MDN Received |
ACK Rec. | Denotes Acknowledgement Received |
Status Details | Contains the details of the latest failure / success message for the selected row. |
Prints the row selected by the user | |
Print List Button | Allows the user to print the current worklist for reference. |
Click the Action icon with each report to view the available user options. The following table below describes the available options.
Option | Description |
---|---|
View Report Details (Read only) | Opens the existing Report Details dialog in read-only mode. |
View ICSR Report (ICSR Viewer for the report) | Opens the existing ICSR Viewer report. |
ICSR Transmission History (Transmission History for the selected report) | Opens the new Transmission History screen |
Remove Transmission | Removes the transmission log entry from the list.
Note: A report whose status is pending cannot be transmitted. |
Re-Transmit | This option is displayed if the selected row has a status of failure or success. Select this option to change the status back to pending and the re-fax the report. |
Remove Multiple Transmissions | Removes transmission of multiple reports that are selected from the list. |
Re-Transmit Multiple Reports | The status of multiple reports that are selected from the list can be changed to "pending," and those reports can be re-transmitted. |
Submit Multiple Reports | Multiple reports that are selected from the list can be marked as submitted simultaneously. |
Remove Transmission | Failed transmissions can be removed using this option as it removes the transmission log entry from the list.
Note: A report whose status is pending cannot be transmitted. |
Re-Transmit | This options allows reports to be re-generated and re-transmitted if report generation had failed earlier.
For failure in other stages of report transmission, this option performs only retransmission. |
Note:
If the ICSR report in a result set row was already submitted, the system does not display the following pop-up menus:a. Remove Transmission
b. Re-Transmit
c. Mark as Submitted
d. Remove Multiple Transmissions
e. Re-Transmit Multiple
f. Submit Multiple Reports
g. ICSR Transmission History
For the same record above, the system, however, keeps the View Report Details and View ICSR Report menus enabled.
The following is an illustration of the Search Criteria section on the Message tab.
The following table lists and describes the fields and controls in the Search Criteria section.
Field | Description |
---|---|
Report | Select E2B or eVAERS or eMDR from the drop-down list to view the transmission status of these reports. |
Agency Trading Partners | Enter the agency or trading partner. |
Transmit Date Range From | Select the transmit date range. |
Range | Select a range to auto populate the Start Date and End Date.
Note: The Range option is cleared if the Start Date or End Date is changed. |
Message # Range | Select the message range. |
Search button | Triggers search based on the search criteria. |
Stage Legend | Shows the status (through colors) corresponding to each stage. |
The following is an illustration of the Total Number of Rows section.
The following table below describes the column in the Total Number of Rows section.
Field | Description |
---|---|
Reports | Displays the number of reports. |
Action | Displays the icon containing the available user actions. |
Trading Partner | Displays the name of the agency or the trading partner. |
EDI Receive Receipt | Displays the EDI Receipt status. |
Local Msg # | Displays the Local Message Number. |
Remote Msg # | Displays the Remote Message Number. |
File Name | Displays the File Name. |
Transmit to EDI | Displays the Transmit to EDI Status. |
EDI Tracking ID | Displays the EDI Tracking ID. |
EDI Transmit Date | Displays the EDI Transmit Date. |
Status | Displays the Report Status e.g. Scheduled or Generated etc.
Click the Report Status to view the Report Details. |
EDI In | Denotes EDI In. |
EDI Out | Denotes EDI Out. |
MDN Rec. | Denotes MDN Received. |
ACK Rec. | Denotes Acknowledgement Received. |
Status Detail | Contains the details of the latest failure / success message for the selected row. |
Print button | Prints the row selected by the user. |
Print List button | Allows the user to print the current worklist for reference. |
Click the Action icon associated with each report to view the available user options. The following tables lists and describes the available user options.
Option | Description |
---|---|
ICSR Transmission History (Transmission History for the selected report) | Opens the new Transmission History screen |
View Acknowledgement (Read only) | Displays the Acknowledgment report.
Note: This menu option is not displayed if ACK has not been received for message. |
View Reports | Opens the Bulk Transmit ICSR in the report view for all the reports in the message. |
View xml acknowledgement | Displays business level acknowledgement |
When using worklist local labeling, be aware of the following:
Filtering by Product Family
Click the magnifying glass icon to filter the search results by product family.
You can filter products in the Event Assessment dialog based on the selected product families.
On filtering, the system displays only the assessment rows matching the selected product families.
Events Assessment can show all listedness values. By default it shows listedness only for core datasheets and for those countries the user has permission to access.
The filter options have a Study ID element and a Case Number (not a type ahead) added to filter cases in the list.
This option is a type ahead field that enables you to enter values for studies defined in the configuration.
The type ahead limits the number of values in the drop-down list to 25.
When you select type ahead values, the system performs a like search.
Sorting
Search results can be sorted by case number and product name.
Printing --You can print the current view of the Worklist as defined by the filtering and sorting criteria.
Saving
The system remembers the filtering and sorting selections for a particular session.
The system displays the default settings on the Worklist - Local Labeling for a new user session.
The system displays the total number of rows in the Search header section (e.g., 20 cases of a possible 450 with 0 cases being processed.)
You can configure the number of cases to display on the Page Size drop-down list in the Search dialog (based on the profile settings for paging as a read only value).
The system displays the number of cases currently in view and automatically updates the range based on the page size specified in the Search dialog (read only). For example, if you select 100, the system divides the displays rows into groups of 100 cases.
You can go directly to a range of cases from the Displaying Rows drop down list.
You can scroll through the Search results page-by-page, as defined by the Page Size drop-down list.
You can filter search results by Product:
The product Filter drop down list contains all products listed in the event assessment.
The system enables you to filter on the Products in the Event Assessment dialog.
By default, the system displays all the products with the <ALL> option.
When filtering, the system displays only the assessment rows for the product you selected.
Events assessment can show all listedness values. By default, it shows listedness only for the core datasheets and countries you have permission to access.
Event
The Event Filter contains a drop down values of distinct Event PT.
The system enables you to filter on the events in the Event Assessment dialog.
By default, the system displays all events with the <ALL> option.
When filtering, the system displays only the assessment rows that match the product you selected.
Diagnosis -- The Diagnosis Filter contains a drop-down list with the following values:
D (Diagnosis)
S (Symptoms)
In the Events Assessment dialog, you can filter on either the diagnosis or the symptom.
By default, the system displays all events with the <ALL> option.
When filtering, the system displays only the assessment rows that match the product you selected.
Datasheets
The Datasheets drop-down contains a list of distinct datasheets.
You can filter on the datasheets in the Event Assessment dialog.
By default, the system displays all datasheets with the <ALL> option.
When filtering, the system displays only the assessment rows for the product you selected.
All the blank datasheets display as a single row of Unspecified.
When you click the Datasheet hyperlink, the system displays the datasheet notes.
Licenses
The Licenses drop-down contains a list of distinct countries for the licenses.
In the Event Assessment dialog, you can filter on licenses.
By default, the system displays all licenses with the <ALL> option.
When filtering, the system displays only the assessment rows that match the product you selected.
All licenses not associated with a datasheet display under Unspecified and are aligned with the datasheet view.
When you click the Licenses hyperlink, the system displays the license references.
You can print the current Search view as defined by the filtering and sorting criteria.
The Process button triggers all the applicable rules (both global and local) for the country/license type for the licenses that are assessed through this screen.
If there were no local reports configured in the system (that is, if there is no data in the Local Reports Configuration table), all the reports triggered above are generated.
If there were local reports configured in the system (that is, if there is data in the Local Reports Configuration table), all the reports triggered above for a case that has Local Lock pending for the country of those licenses assessed above are in scheduled state and are generated on subsequent local lock.
For more information about Local Labeling, see the LAM User Guide for Worklist - Local Labeling requirements.
Coding Status enables you to perform the following functions:
Coding Status View
Single Case Coding / Recoding
Bulk Coding / Recoding
Coding Status Reports
Configured users can select Coding Status through the Worklist menu. The following is an illustration of the Coding Status screen.
The following is an illustration of the Search Conditions section.
The following table lists and describes the fields and controls in the Search Conditions section.
Field | Description |
---|---|
Search For | Select the criteria by which the case must be searched for and enter an appropriate search item, if applicable.
Note: You can search for cases based on multiple study identifiers. The option, "Prj/Othr/Stdy/Rptr/Pat" supports entry of Project ID, Study ID, Other ID, Center ID, Reporter ID, and Patient ID values separated by the "/" (forward slash) character. Any or all fields may be present. |
Full Search | Select this checkbox, if necessary.
Full search is best explained with an example. If the full search option is not used and the item that is entered under Search for is "AB", then a string such as "ABCESS" will match "AB", but a string such as "LABOR" will not. If the full search option is used, both these items will match "AB". Also, items whose first few letters sound similar (like "TIM" and "TIN") will also appear in the search results. |
Product Family | Select the Product Family that the case belongs to, if applicable. |
Date Range | Select a relevant Date Range, if applicable.
Tip: To enter a customized date range, select Custom Date Range from the list. Enter an appropriate date range in the custom date range dialog and click OK. |
Advanced | Select an advanced condition for the case, if applicable.
Note: Click AC to create a new advanced condition. |
Search | Displays the list of cases that match the entered search criteria |
The following is an illustration of the Total Number of Rows section.
The following table lists and describes the columns in the Total Number of Rows section.
Field | Description |
---|---|
Case Lock icon | Depicts the lock or unlock status of the case. |
Case Number | Displays the case number. Click the link to view the case form. |
Aware Date | Displays the Aware Date for the case. |
Seriousness Criteria | Displays the Case level Seriousness Criteria. In case the case has any Fatal or Life Threatening event, it is displayed as such. |
Workflow State | Displays the Workflow State of the case |
Aging (Days) | If all code-able items of the case are coded completely, Aging is displayed as the Number of days from the Initial Receipt Date to the date when latest item of the case was coded.
If any code-able item of the case is not coded, Aging is displayed as the Number of days from the Initial Receipt Date to the system date (Database Server). |
Coding State | If all the events / products are encoded, the coding state is denoted with a green check mark.
If the case has even a single code-able item as not coded, the coding state is shown as a red cross mark. |
The following table lists and describes the icons used to identify the coding status.
Icon | Description |
---|---|
![]() |
Displays that the verbatim text has not yet been coded. |
![]() |
Displays that the verbatim text has been successfully coded. |
![]() |
Is displayed if the verbatim text has been submitted to Central Coding, but no result has been returned to Argus yet. |
![]() |
Is displayed if the term was submitted to Central Coding for coding and returned a status of error either from Central Coding or Argus. |
The Letters function enables you to search for letters associated with a case.
To access the Worklist - Letters page
Select Worklist --> Letters.
When the system opens the Worklist - Letters page, enter the appropriate information.
The following is an illustration of the Search Case section.
The following table lists and describes the fields and controls in this section.
Field | Description |
---|---|
Current Letter | Select the current letter from this list |
Date Range | Allows the user to select a date range from which cases may be selected. The selection made from the Date Range drop-down list automatically populates the From and To fields. |
Show only those cases with no previous notifications | Allows the user to filter the case list search to only those cases that have not had any correspondence letters sent. |
Advanced Condition | Select an Advanced Condition from the list |
AC | Creates a query for an Advanced Condition |
Search button | Displays the results matching the search criteria |
The following is an illustration of the Total Number of Rows section.
The following table below describes the columns in the section.
Field | Description |
---|---|
Action | Displays the Action icon |
Case ID | Displays the Case ID. Click the Case ID to view the case details. |
Date | Displays the date |
Reporter | Displays the reporter name |
Last Notification | Displays the last notification date |
The Intake function enables you to view a list of incoming attachments in Worklist View where you can select an attachment for creating a case.
To access the Worklist - Intake page
Select Worklist --> Intake.
When the system opens the Worklist - Intake page, enter the appropriate information.
The following is an illustration of the Pending tab.
Users other than Workflow Managers can now reject case from Intake Worklist.
The following table lists and describes the fields and controls in this section.
Field | Description |
---|---|
Priority | Allows the user to view the priority of the case. |
Initial Date | Allows the user to view the initial receipt date of the case. |
Intake Date | Allows the user to view the date of case intake. |
Product Name | Allows the user to view the first suspect Product in question. |
Generic Name | Allows the user to view the generic name of the suspect product in question. |
Event PT | Allows the user to view the Primary Event and Verbatim as Reported. |
Event Verbatim | The following format is used:
Primary Event (Verbatim as Reported) |
S/U/R | Allows the user to view case-level assessments |
F, LT or H | Allows the user to view Fatal, Life-Threatening or Hospitalized cases. |
Case Type | Allows the user to view report type information. |
Study ID | Allows the user to view the Study ID of the study cases. |
Reporter Type | Allows the user to view the Reporter type for the Primary Reporter in the case. |
Country | Allows the user to view the Country of incident. |
Assigned To | Allows for the current owner or "Unassigned" user to be assigned to the case. |
Group | Allows for the current group owner or "Unassigned" group to be assigned to the case. |
Central Site/LAM Site | Allows the user to view the current Site (Argus or Affiliate) of the Case - If there are no Sites defined then ALL users can access the case attachment. |
Attachment Name | Allows the user to view the attachment which is associated to the case. |
Classification | Allows the user to view the attachment classifications which is associated to the case. |
Description | Allows the user to view the attachment description which is associated to the case. |
Create Case | Allows the user to create a case. |
Reject Case | Allows the user to reject the case. |
Print List | Allows the user to print the case. |
The following is an illustration of the Rejected tab.
The following table below describes the columns in the section.
Field | Description |
---|---|
Priority | Allows the user to view the priority of the case. |
Initial Date | Allows the user to view the initial receipt date of the case. |
Intake Date | Allows the user to view the date of case intake. |
Product Name | Allows the user to view the first suspect Product in question. |
Generic Name | Allows the user to view the generic name of the suspect product in question. |
Event PT | Allows the user to view the Primary Event and Verbatim as Reported. |
Event Verbatim | The following format is used:
Primary Event (Verbatim as Reported) |
S/U/R | Allows the user to view case-level assessments |
F, LT or H | Allows the user to view Fatal, Life-Threatening or Hospitalized cases. |
Case Type | Allows the user to view report type information. |
Study ID | Allows the user to view the Study ID of the study cases. |
Reporter Type | Allows the user to view the Reporter type for the Primary Reporter in the case. |
Country | Allows the user to view the Country of incident. |
Assigned To | Allows for the current owner or "Unassigned" user to be assigned to the case. |
Group | Allows for the current group owner or "Unassigned" group to be assigned to the case. |
Central Site/LAM Site | Allows the user to view the current Site (Argus or Affiliate) of the Case - If there are no Sites defined then ALL users can have access to the case attachment. |
Attachment Name | Allows the user to view the attachment which is associated to the case. |
Classification | Allows the user to view the attachment classifications which is associated to the case. |
Description | Allows the user to view the attachment description which is associated to the case. |
Rejected Date | Allows the user to view the date when the case was rejected. |
Rejected By | Allows the user to view the user who rejected the case. |
Create Case | Allows the user to create a case. |
Reject Case | Allows the user to reject the case. |
Print List | Allows the user to print the case. |