Example INVITE from SIP End Point to sipd
Apr 21 08:50:38.786 On [0:0]192.168.200.68:5060 received from 192.168.200.6:5062 INVITE sip:800@192.168.200.68:5060 SIP/2.0 Via: SIP/2.0/UDP 192.168.200.6:5062 From: anonymous <sip:anonymous@192.168.200.6:5062>;tag=1 To: sut <sip:800@192.168.200.68:5060 P-Asserted-Identity: sipp <sip:7789@192.168.200.6:5062 Privacy: id Call-ID: 1.1688.192.168.200.6@sipp.call.id Cseq: 1 INVITE Contact: sip:anonymous@192.168.200.6:5062 Max-Forwards: 70 Subject: Performance Test Content-Type: application/sdp Content-Length: 136 v=0 o=user1 53655765 2353687637 IN IP4 127.0.0.1 s=- t=0 0 c=IN IP4 127.0.0.1 m=audio 10000 RTP/AVP 0 a=rtpmap:0 PCMU/8000 Sample INVITE from sipd to h323d Apr 21 08:50:38.807 On 127.0.0.1:5070 received from 127.0.0.1:5060 INVITE sip:800@127.0.0.1:5070;acme_sag=sag1;acme_irealm=internal SIP/2.0 Via: SIP/2.0/UDP 127.0.0.1:5060;branch=z9hG4bK0804o700c0f0t9gpj0g0.1 From: anonymous <sip:anonymous@192.168.200.6:5062>;tag=SDm8kvc01-1 To: sut <sip:800@192.168.200.68:5060 P-Asserted-Identity: sipp <sip:7789@192.168.200.6:5062 Privacy: id Call-ID: SDm8kvc01-083221d8c0fa33f71ae85dd6ed0e4ea4-06ahc21 Cseq: 1 INVITE Contact: <sip:anonymous@192.168.200.68:5060;transport=udp Max-Forwards: 69 Subject: Performance Test Content-Type: application/sdp Content-Length: 136 GenericID: 9883100005@000825010100 v=0 o=user1 53655765 2353687637 IN IP4 127.0.0.1 s=- t=0 0 c=IN IP4 127.0.0.1 m=audio 10000 RTP/AVP 0 a=rtpmap:0 PCMU/8000 Sample SETUP sent from h323d to remote H323 EP Q.931 Protocol discriminator: Q.931 Call reference value length: 2 Call reference flag: Message sent from originating side Call reference value: 664D Message type: SETUP (0x05) Bearer capability Information element: Bearer capability Length: 3 ...1 0000 = Information transfer capability: 3.1 kHz audio (0x10) .00. .... = Coding standard: ITU-T standardized coding (0x00) 1... .... = Extension indicator: last octet ...1 0000 = Information transfer rate: 64 kbit/s (0x10) .00. .... = Transfer mode: Circuit mode (0x00) 1... .... = Extension indicator: last octet ...0 0011 = User information layer 1 protocol: Recommendation G.711 A-law (0x03) 1... .... = Extension indicator: last octet Display 'anonymous' Information element: Display Length: 9 Display information: anonymous Calling party number Information element: Calling party number Length: 2 .... 0000 = Numbering plan: Unknown (0x00) .000 .... = Number type: Unknown (0x00) 0... .... = Extension indicator: information continues through the next octet .... ..00 = Screening indicator: User-provided, not screened (0x00) .01. .... = Presentation indicator: Presentation restricted (0x01) 1... .... = Extension indicator: last octet