Pre-Configuration Requirements for the Wireless WS6

Before you can connect the Wireless WS6 to a wireless network, make sure to:

  1. Read the PCI DSS Wireless Guideline Informational Supplement version 2.0.

  2. Verify that the WS6 has minimum CAL version 13.1.3.115 installed. If CAL needs to be updated, contact your Oracle MICROS representative.

  3. Verify that the Wireless Networking Module was installed on the WS6. This must be installed before connecting the Wireless WS6 to a wireless network. If you need to request this part, reference the following part number (PN) and description:

    • PN: 400633-400-PT

    • Description: Wireless Upgrade Kit (802.11 a/b/g/n) for Workstation 6

    The MICROS Workstation 6 Series Setup Guide contains installation instructions.

  4. Ensure that your site has a WPA2-AES compatible Access Point.

  5. Have a USB keyboard for the workstation.

Parent topic: Configuring the Wireless Workstation 6 Series