The image shows the external network connectivity for the X7. It contains a rendering of the X7 backplane with two power supplies on the left. To the right of the power supplies In the top slot is the 2x SFP28 10G/25G BCM57414; its two ports are labeled “eth4” and “eth3” and are each circled in green to indicate “Client or Backup — 10/25G SFP28.”. In the lower slot the two ports are labeled “ILOM (1G NET MGT)” and “HOST admin (1G NET-0)”. To the right of these, the top slot is the 2x QSFP+ QDR HCA Infiniband; its two ports are labeled “ib1” and “ib0”. In the lower slot is the BCM57417 LOM; RJ45 (Net3/4) or SFP28 (Net1/2). The first two of its four ports are labeled ”eth0” and “eth1” and are circled in yellow to indicate “10G RJ45 or 10/25G SFP28”. The other two ports are labeled “eth2” and a circled in red to indicate “ 10G RJ45 or 10/25G SFP28 Client or Backup but not all 4 four (4) ports at once.”