Go to main content

man pages section 8: System Administration Commands

Exit Print View

Updated: Thursday, June 13, 2019
 
 

wpad(8)

Name

wpad - WPA and WPA2 protocol daemon

Synopsis

/usr/lib/inet/wpad [-i interface] [-k pre_shared_key_name]

Description

The wpad daemon provides common client functionality for the WiFi Protected Access (WPA) versions 1 and 2, as defined by IEEE802.11i standard. WPA was created by the WiFi Alliance, an industry trade group. WPA implements the majority of the IEEE 802.11i standard, and was intended as an intermediate measure to take the place of Wired Equivalent Privacy (WEP) while 802.11i was prepared. WPA2 implements the full standard.

wpad provides the following WPA/IEEE 802.11i features:

  • WPA-PSK (“WPA-Personal”)

  • Key management for CCMP, TKIP, WEP104, WEP40

Stop and start the wpad daemon using dladm(8). Use:

# dladm connect-wifi

...to start the wpad daemon. Use:

# dladm disconnect-wifi

...to stop the daemon.

Options

The following options are supported:

–i interface

Specify a WiFi Link interface to start the wpad daemon.

–k pre_shared_key_name

Specify the pre-shared key used for the WiFi Link.

Examples

Example 1 Starting the wpad Daemon on Specific WiFi Link

To create the WPA key psk, enter the following command:

# dladm create-secobj -c wpa psk

To use key psk to connect to ESSID wlan on link ath0, enter the following command:

# dladm connect-wifi -k psk -e wlan ath0
Example 2 Stopping the wpad Daemon on Specific WiFi Link

To stop the daemon on the link ath0, enter:

# dladm disconnect-wifi ath0

Attributes

See attributes(7) for descriptions of the following attributes:

ATTRIBUTE TYPE
ATTRIBUTE VALUE
Availability
service/network/wpa
Interface Stability
Uncommitted

See Also

svcs(1), attributes(7), smf(7), dladm(8), svcadm(8)

Notes

The wpad service is managed by the service management facility, smf(7), under the service identifier:The wpad service is managed by the service management facility, smf(7), under the service identifier:

The wpad service is managed by the service management facility, smf(7), under the service identifier:

svc:/network/wpa:<link>

Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(8). The service's status can be queried using the svcadm(8) command.