This chapter describes the various libraries and drives supported by DIVArchive 7.6, and includes the following information:
The following table identifies libraries and associated control software supported by DIVArchive 7.6. LibAttach is only valid in a Windows based environment, not in Linux.
Manufacturer | Library | Control Software | Robot Manager Module |
---|---|---|---|
Dell | TL4000/TL2000Foot 1
ML6010Foot 2 |
Direct SCSI/FC
Direct SCSI/FC |
Robot_SCSI
Robot_SCSI |
HP | StoreEver
ESL G3-700 ESL G3-1500 ESL G3-3000 ESL G3-5000 MSL-2024 MSL-2048 MSL-6480 |
Direct SCSI/FC
Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC |
Robot_SCSI
Robot_SCSI Robot_SCSI Robot_SCSI Robot_SCSI Robot_SCSI Robot_SCSI Robot_SCSI |
IBM | TS3100
TS3200 TS3310 TS3500 TS4500 |
Direct SCSI/FC
Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC |
Robot_SCSI
Robot_SCSI Robot_SCSI Robot_SCSI Robot_SCSI |
Oracle StorageTek | SL8500Foot 3
SL500Foot 4 SL150 9310 5500 L180 L7000 SL24 L80 L40 L20 L1400M |
LibAttach 1.4.2Foot 5
Direct SCSI/FC Direct SCSI/FC ACSLS 7.1 ACSLS 7.2 ACSLS 7.3 or Direct SCSI/FC ACSLS 8.0 or ACSLS 8.2 LibAttach 1.4.2Footref 5 Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC |
Robot_ACSLS
Robot_SCSI Robot_SCSI Robot_ACSLS Robot_ACSLS Robot_ACSLS or Robot_SCSI Robot_ACSLS Robot_ACSLS Robot_ACSLS Robot_ACSLS Robot_ACSLS Robot_ACSLS |
Oracle StorageTek | SL4000 | LibAttach 1.4.2Footref 5
Direct SCSI/FC |
Robot_ACSLS
Robot_SCSI |
Oracle StorageTek | SL3000 | LibAttach 1.4.2Footref 5
Direct SCSI/FC |
Robot_ACSLS
Robot_SCSI |
Qualstar | TLS-5000RLS-85210 | Direct SCSI/FC
Direct SCSI/FC |
Robot_SCSI
Robot_SCSI |
Quantum (ADIC) | Scalar i6000
Scalar i500 Scalar i40/i80 Scalar i3/i6 Scalar 100 Scalar 1000 Scalar 10000 Scalar 12000 Scalar i2000Foot 6 |
Direct SCSI/FC
Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC Scalar DLC or Direct SCSI/FC Scalar DLC or Direct SCSI/FC Scalar DLC or Direct SCSI/FC Scalar DLC or Direct SCSI/FC Scalar DLC or Direct SCSI/FC |
Robot_SCSI
Robot_SCSI Robot_SCSI Robot_SCSI Robot_ADIC or Robot_SCSI Robot_ADIC or Robot_SCSI Robot_ADIC or Robot_SCSI Robot_ADIC or Robot_SCSI Robot_ADIC or Robot_SCSI |
Sony Petasite | S60 | PSC 5.00 | Robot_Sony |
Sony ODA | ODS-L10ODS-L30MODS-L60EODS-L100E | Robot Manager
Robot Manager Robot Manager Robot Manager |
Robot_SCSI
Robot_SCSI Robot_SCSI Robot_SCSI |
Spectralogic | T-Finity
T950 T680, T380, T200 T120 T50e |
Direct SCSI/FC
Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC Direct SCSI/FC |
Robot_SCSI
Robot_SCSI Robot_SCSI Robot_SCSI Robot_SCSI |
Footnote 1 The Dell TL2000 is an IBM TS3100 library.
Footnote 2 The Dell ML6010 is an AIDC i500 library.
Footnote 3 Operational upon robot failure when configured with multiple LSMs and one robot per LSM.
Footnote 4 The SL500 library will be transitioned to End of Life (EOL) soon.
Footnote 5 DIVArchive only supports 32-bit LibAttach and not 64-bit.
Footnote 6 Autoclean is not supported, but the Scalar i2000 with partitioning is supported.
This section describes drives supported by DIVArchive 7.6.
Manufacturer | Drive Model |
---|---|
HP | LTO-3
LTO-4 LTO-5 LTO-6 LTO-7 |
IBM | LTO-1
LTO-2 LTO-3 LTO-4 LTO-5 LTO-6 LTO-7Foot 1 LTO-8 3592 TS1120 TS1140 TS1150 TS1155 |
Oracle StorageTek | Titanium 10000-A
Titanium 10000-B Titanium 10000-C Titanium 10000-D 9840A 9840B 9840C 9840D 9940A 9940B |
Sony (Optical) | ODS-D55U
ODS-D77F The following drives are supported in DIVArchive 7.4 and later: ODS-280F ODS-280UFoot 2 |
Footnote 1 Drivers for the IBM LTO-7 drive currently only exist for Windows Server 2012, not for Windows Server 2008.
Footnote 2 The ODS-280U has not been qualified for use with DIVArchive 7.5 and later releases.
Sony ODA Blu-ray Optical Drives are supported in DIVArchive 7.6 on Windows only. The drives are viewable as a Tape Drive and Cartridge (having UDF format) under the Disk Drives tab in the Control GUI.The drives must be configured using the Optical Disk Archive Utility before configuring DIVArchive on the system.The Windows Device Manager will display the drives as an Unknown Device because there are no drivers available for them. Several configuration files must be modified to include these drives in the DIVArchive System. See the Oracle DIVArchive Installation and Configuration Guide for detailed information.
The details of these drives are as follows:
DIVArchive has only been tested with the ODS-280F Fibre Channel type. These drives are twice as fast as the Gen1 drives. The ODS-280U has not been qualified for use with DIVArchive 7.5 and later releases.
The cartridge available for the ODC3300R WORM drive has a 3.3 TB capacity.
Gen2 drives can read content written on Gen1 media with Gen1 drives. DIVArchive does not support the READ-ONLY media drive compatibility. Oracle recommends isolating Gen1 media from Gen2 media in the configuration (no cross-generation compatibility), and there must be at least one Gen1 drive in a library containing Gen1 cartridges.
DIVArchive 7.6 supports the following disks:
Direct Connection using a local path
For example drive letters in Windows such as M:\managed_disk
, and on Linux such as \managed_disk
.
CIFS Connection
FTP Connection
Seachange BML
Harmonic MediaGrid
MetaSan
Swift Object Storage Interface (EMC ECS)
Oracle Public Cloud's object storage
Oracle Cloud Infrastructure's object storage
This disk is only used for caching, tape to tape copying, tape spanning, and tape repacking operations. The cache does not have to be on a RAID protected disk, but it is recommended.
The size of this disk must be at least the size of your largest object. The cache disk can be a local disk, SAN, NFS, or SMB connected. Oracle recommends setting the cache disk block size to at least 64kb.
The disk will be used for storing DIVArchive objects and also Nearline operations. The storage size depends on the amount of space desired to store objects. This disk must be RAID protected.
You can use a storage disk for cache too. The storage disk can be a local disk, SAN, NFS, or SMB connected. Oracle recommends setting the storage disk block size to at least 64 kb.