Go to primary content
Diameter Signaling Router IP Front End (IPFE)
Release 8.2
E89005
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

Switch MAC address cache and ping feature

In certain deployments where all traffic passes through the IPFE, no Ethernet packets go directly to the DA-MP from the gateway (or remote peer, for the case that a remote peer is on the local network segment). Rather, all Ethernet packets come to the DA-MP by way of the IPFE. Any intermediate Switch would be unaware that the Ethernet jack (switch port) of the gateway (or peer) is a viable path for packets emitted by the DA-MP. In this case, the Switch would broadcast that packet to all Ethernet switch ports as a last resort. This creates network flooding.

For this situation, even if the switch had knowledge of the aforementioned switch port, this information expires after five minutes on typical switch configurations.

The solution to this problem is to keep the switch tables updated with periodic pings to remote peers or gateways. An ICMP or ARP ping every two minutes, from the DA-MPs, is sufficient.

To run the ping on a particular DA-MP, login as root and type:
/usr/TKLC/dsr/bin/pingAllLivePeers -v
For options, type:
pingAllLivePeers -h
These commands can be used for diagnostics.

Note:

The background operation logs to /var/log/messages and /var/log/cron