Go to primary content
Diameter Signaling Router MAP-Diameter Interworking Function
Release 8.2
E89007
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

Diameter Common Configuration for MAP-Diameter IWF

Diameter Common configuration must be done before Map-Diameter IWF configuration can be performed.

Use the explanations and procedures in the Diameter Common configuration help and the Diameter Common User's Guide to complete the Diameter Common configuration, including the Diameter Common components needed for use with Map-Diameter IWF.

SOAM Diameter Common Configuration

Diameter Common configuration for MCC Ranges Network Identifiers and MP Profile assignment for Map-Diameter IWF is done from the SOAM GUI in a 3-tiered DSR topology.

  1. MPs

    Navigate to Diameter Common > MPs > Profile Assignments and verify the correct DA-MP Profiles and SS7 MP profiles have been assigned for Map-Diameter IWF DA-MPs and SS7-MPs shown in the DA-MP and SS7-MP lists. If assignments need to be made or changed, navigate to Diameter Common > MPs > Profile Assignments to assign the correct MP Profiles.

NOAM Diameter Common Configuration

Diameter Common configuration for MCCMNC and MCCMNC Mapping Network Identifiers for Map-Diameter IWF is done from the NOAM GUI in a 3-tiered DSR topology.
  1. Navigate to Diameter Common > Network Identifiers > MCCMNC [Insert] to configure MCCMNC entries.
  2. Navigate to Diameter Common > Network Identifiers > MCCMNC Mapping [Insert] to configure MCCMNC Mapping entries using the configured MCCMNC entries.