RxApplUnavailable

Measurement ID

10016

Measurement Group

DSR Application Exception

Measurement Type

Simple

Measurement Dimension

Arrayed (by Application ID)

Description

Number of Request messages received for a DSR Application that could not be routed to the DSR Application because the DSR Application was Unavailable.

Collection Interval

5 min

Peg Condition

When DRL receives a Request message from a peer that matches an Application Routing Rule, but cannot be routed to the DSR Application because its Operational Status is "Unavailable".

The DSR Application Operational Status is "Unavailable" when one of the following conditions occurs:

• The operator has removed the DSR Application from service (Admin State is "Disabled".)
• The DSR Application was congested when an attempt to route a Request message to the SR Application occurred.

When a DSR Application is "Unavailable", the message will be handled as defined by the "unavailability Action" attribute for the DSR Application (see the GUI screen for the DSR Application).

Measurement Scope

Server Group

Recovery

1. Verify the DSR Application Admin State on the Diameter > Maintenance > Applications GUI screen.
2. Verify the DSR Application "Unavailability Action" attribute configuration on the Diameter > Configuration > Application IDs GUI screen.