Associating a DSR Network Element with an MRA

If the MRA device gets an MPE-initiated message and the MRA device has a DSR configured, the MRA device will forward the message to the Primary DSR. If the connection to the primary DSR is not available, the MRA device forwards the message to another DSR (if configured). Note that the primary DSR Network Element (NE) should be configured in the Associated NEs list first.

If your system is using DSR for your Diameter routing, use this procedure to associate a DSR network element with an MRA device.

To associate a DSR network element with an MRA:

  1. From theMRA section of the navigation pane, select Configuration.

    The content tree displays a list of MRA groups; the initial group is ALL.

  2. From the content tree, select an MRA device.

    The MRA Administration page opens.

  3. Select the MRA tab.

    The current MRA configuration settings are displayed.

  4. Click Modify.

    The Modify MRA page opens.

  5. Select a Primary DSR to associate with this MRA from the list.
  6. Enter a string value into Segment ID, if needed. If the MRA receives a message with a Destination-Host equal to the Segment ID, the MRA removes the Destination-Host AVP from the message.
  7. Click Save.
The specified DSR information is associated with this MRA device.
Parent topic: Associating Network Elements with an MRA Device