70007 - QP Resource Not Ready

Alarm Type: QP

Description: Not all QP resources are ready.

Severity: Critical

Instance: N/A

HA Score: Failed

Clearing Action: To clear the alarm, one of the following conditions must be met:

All route resources managed by QP are functional.
The alarm auto clears after 300 sec.

OID: QPResourceNotReady

Recovery:

Note: Static routes will be reapplied during the promotion of a node to Active. If a failure occurs while reapplying static routes, promoting a node to Active in turn will fail.

Note: Currently, only the route resource is managed by QP.

Note: The main log location for troubleshooting route resource not ready issues is here:/var/camiant/log/qpRouteTool.log. Trace logs for qp_procmgr and routemgr may be needed for troubleshooting. Trace logs can be captured using commands:tr.cat qp_procmgr > /qp_procmgr.trace tr.cat routemgr > /routemgr.trace

If the original Active node can go back to Active, the current node will be demoted after failure. In this situation, no workaround is needed because the system will recover automatically. However, you need to check the reason that applying routes fails so that it does not occur in the next failover.

If the original Active node can not go back to Active, the current node will repeatedly attempt to go Active. It will not become Active until the application of static routes is successful. In this situation, the reason for the failure needs to be checked case by case so that the system can be recovered.