SMS Relay Configuration Options
- Attribute
- Description
- SMS Enabled
- Select true to enable SMS messaging to subscribers.
- Relay Host
- Enter the FQDN or IP address of the relay server.
- Relay Port
- Enter the port number on which the relay server is listening for SMS messages. The default port is 8080.
- Throttle Value
- Enter the time interval, in milliseconds, at which SMS messages are sent from the MPE device. If set to 1000 ms, the MPE device sends one SMS message per second; if set to 500 ms, the MPE device sends two messages per second. The recommend throttle value is 0 ms which means that the device sends the SMS message as soon as it receives the message.