Updating Site Information

You can update site information (for example, IP address, host name, or VLAN IDs) for a secondary site in a cluster. For more information on modifying a cluster, see Modifying a non-CMP Cluster.

To update the secondary site in a cluster:

  1. On the CMP server, remove the secondary site from the topology.

    See Removing a Site from the Topology for more information on removing a site.

  2. Using the Platform Configuration (platcfg) utility, re-create the configuration for the secondary site to change the IP address, host name, or VLAN ID settings.

    Refer to Platform Configuration User's Guide for information on configuring a site.

  3. On the CMP server, from the Platform Setting section of the navigation pane, select Topology Settings.

    The Cluster Configuration page opens; the initial group is All Clusters.

  4. In the CMP system, add the secondary site.

    See Setting Up a Georedundant Site for more information on setting up a site.

    A confirmation message appears.

  5. Click OK.
  6. After the site has been updated, reapply the configuration for the changes to take effect.

    See About Reapplying a Configuration for more information.

The site has been updated in the cluster.
Parent topic: About Managing Georedundant Sites