Diameter QoS Traffic Profile Configuration Parameters

Parameter

Description

QoS Class Identifier

Identifies the QoS class. Enter a value between 1 and 254 or select from the following:

N/A (default)
1 = Conversational speech
2 = Conversational
3 = Streaming speech
4 = Streaming
5 = Interactive with priority 1 signalling
6 = Interactive with priority 1
7 = Interactive with priority 2
8 = Interactive with priority 3
9 = Background
65 = MC-PTT Voice
66 = PTT Voice
69 = MC-PTT Signaling
70 = MC Data

Note: QCI values between 1 and 254 are supported. Values other than 1-9, 65, 66, 69, and 70 are undefined.

Uplink Max Authorized Rate (bps)

Maximum authorized bandwidth in bits per second for uplinks (user equipment to network).

Downlink Max Authorized Rate (bps)

Maximum authorized bandwidth in bits per second for downlinks (network to user equipment).

Uplink Min Guaranteed Rate (bps)

Minimum guaranteed bandwidth in bits per second for uplinks (user equipment to network). Only applicable if the QoS class identifier is between 1 and 4.

Downlink Min Guaranteed Rate (bps)

Minimum guaranteed bandwidth in bits per second for downlinks (network to user equipment). Only applicable if the QoS class identifier is between 1 and 4.

ARP Priority Level

Allocation and Retention Priority level of the service flows associated with this Diameter profile. Specify 1 (highest) to 15 (lowest).

ARP Preemption Capability

Select from the following:

N/A (default)
PREEMPTION_CAPABILITY_ENABLED
PREEMPTION_CAPABILITY_DISABLED

ARP Preemption Vulnerability

Select from the following:

N/A (default)
PREEMPTION_VULNERABILITY_ENABLED
PREEMPTION_VULNERABILITY_DISABLED

Resource Allocation Notification

Indicates that the allocation of resources for the related PCC rules will be confirmed. Select from the following:

N/A (default)
ENABLE_NOTIFICATION